Effect of annealing on structure and permeability of poly [(l-trimethylsilyl)-l-propyne]

The permeability of annealed poly (l-(trimethylsilyl)-l-propyne) was studied from the viewpoint of structural information obtained from x-ray diffraction and density. The sample cast from benzene solution had low density (0.82 g/cm³) and high permeability, whereas the annealed sample had a higher density (0.88 g/cm³) and permeability lower by two orders of magnitude. The smaller-angle x-ray diffraction peak for each sample, which was likely to reflect the distance between intermolecular chains, increased in intensity and shifted toward higher angle, corresponding to the change of the density with annealing. The logarithmic oxygen permeability was proportional to the density, namely the free volume fraction correlated with the diffusion coefficient and controlled by annealing and swelling by alcohols.     

Detection of 8-hydroxy-2'-deoxyguanosine in deoxyribonucleic acid by the 32P-postlabeling method.

Using synthesized 8-hydroxy-2'-deoxyguanosine 3'-monophosphate as a marker, the 32P-postlabeling method was adapted with minimum modifications for the analysis of 8-hydroxy-2'-deoxyguanosine (8-OH-dG) content in deoxyribonucleic acid (DNA). This method allows the analysis of one 8-OH-dG per 10(4) DNA nucleotides with only 10 pmoles of nucleotides required. The amounts of 8-OH-dG in DNA detected by the postlabeling method correlated well with the electrochemical detection method but were consistently lower.     

Optically active antifungal azoles. VIII. Synthesis and antifungal activity of 1-[(1R,2R)-2-(2,4-difluoro- and 2-fluorophenyl)-2-hydroxy-1-methyl-3-(1H-1,2,4-triazol-1-yl)propyl]- 3-(4-substituted phenyl)-2(1H,3H)-imidazolones and 2-imidazolidinones

New optically active antifungal azoles, 1-[(1R,2R)-2-(2,4-difluoro- and 2-fluorophenyl)-2-hydroxy-1-methyl-3-(1H-1,2,4-triazol-1-yl)propyl ]-3-(4- substituted phenyl)-2(1H,3H)-imidazolones (1,2) and 2-imidazolidinones (3,4), were prepared in a stereocontrolled manner from (1S)-1-[(2R)-2-(2,4- difluoro- and 2-fluorophenyl)-2-oxiranyl]ethanols (15, 16). Compounds 1-4 showed potent antifungal activity against Candida albicans in vitro and in vivo, as well as a broad antifungal spectrum for various fungi in vitro. Furthermore, the imidazolidinones, 3b--e and 4d, e, were found to exert extremely strong growth-inhibitory activity against Aspergillus fumigatus.     

Palladium-Catalyzed Decarboxylative Alkynylation of α-Acyloxyketones by C(sp3)−O Bond Cleavage

Palladium-catalyzed decarboxylative alkynylation of α-acyloxyketones triggered by C(sp³)−O bond cleavage is disclosed. The decarboxylation strategy featuring a neutral reaction condition enabled an unprecedent catalytic alkynylation of a ketone enolate. The reaction was applied to a variety of substrates, giving desired products in good yields. We successfully obtained X-ray crystallography of a new palladium–enolate intermediate that was synthesized by a reaction of [Pd(cod)(CH₂TMS)₂] with XPhos and α-acyloxyketone at room temperature, indicating facile C(sp³)−O bond disconnection.     

Liquid crystalline properties of dissymmetric molecules IV. The substituent effect on thermal properties of nematic and smectic A phases in three aromatic ring systems with ester linkages

This paper describes the effect of substituent and ester linkage on smectic properties for some derivatives of 4-R -phenyl 4-(4-octyloxybenzoyloxy)benzoates (1), 4-octyloxyphenyl 4-(4-R-benzyloxy)benzoates (2), 4-(4-octyloxybenzoyloxy)phenyl 4- R -benzoates (3), and 4-R-phenyl 4-octyloxyphenyl terephthalates (4) where R = OCH₃, CH₃, OC₈H₁₇, C8H17, halogens, CF₃, OCF₃, CN, NO2, etc. The thermal properties are discussed in terms of the electrostatic nature of the substituents and the relative orientation of the ester groups with respect to both terminal substituents. The substituent effect on the layer structure of the smectic A phase is also examined by means of a small angle X-ray analysis.     

Accurate measurement of uranium isotope ratios in soil samples using thermal ionization mass spectrometry equipped with a warp energy filter

A chemical and mass-spectrometric procedure for uranium isotopic analysis using a thermal ionisation mass spectrometer equipped with a Wide Aperture Retardation Potential energy filter has been developed and applied to uranium isotopic measurements for various soil samples. Soil samples were digested using a microwave digestor. Uranium was isolated from soil samples by the chemical separation procedure based on the use of anion-exchange resin and UTEVA extraction chromatography column. The isotope ratios were measured for two certified reference materials by using a VG Sector 54-30 thermal ionisation mass spectrometer in dynamic mode with Faraday cup and Daly ion counting system. Replicates of standard reference materials showed excellent analytical agreement with established values supporting the reliability and accuracy of the method. Precision of the ²³⁵U/²³⁸U ratio was achieved by a correction factor of 0.22% amu as a function of ion-beam intensity with sample loads of around 250?ng of U. The resulting reproducibility for standards and soil samples was better than 0.2% at two standard deviations (SD). Uranium isotopic compositions have been determined in several reference soil samples such as Buffalo river sediment, NIST 2704, river sediment SRM 4350b and ocean sediment NIST-4357 and a Chernobyl soil sample. There was a significant deviation from the natural uranium in comparison with Chernobyl soil samples.     

Charge Transfer and Metastable Ion Dissociation of Multiply Charged Molecular Cations Observed by Using Reflectron Time-of-Flight Mass Spectrometry

A multiply charged molecule expands the range of a mass window and is utilized as a precursor to provide rich sequence coverage; however, reflectron time-of-flight mass spectrometer has not been well applied to the product ion analysis of multiply charged precursor ions. Here, we demonstrate that the range of the mass-to-charge ratio of measurable product ions is limited in the cases of multiply charged precursor ions. We choose C₆F₆ as a model molecule to investigate the reactions of multiply charged molecular cations formed in intense femtosecond laser fields. Measurements of the time-of-flight spectrum of C₆F₆ by changing the potential applied to the reflectron, combined with simulation of the ion trajectory, can identify the species detected behind the reflectron as the neutral species and/or ions formed by the collisional charge transfer. Moreover, the metastable ion dissociations of doubly and triply charged C₆F₆ are identified. The detection of product ions in this manner can diminish interference by the precursor ion. Moreover, it does not need precursor ion separation before product ion analysis. These advantages would expand the capability of mass spectrometry to obtain information about metastable ion dissociation of multiply charged species.     

Three-dimensional visualization of columnar vortices in rotating Rayleigh–Bénard convection

Journal of Visualization -  To enrich the three-dimensional experimental details of vortex structures in rotating Rayleigh–Bénard convection, we established a technique...     

Formation of polymeric micelles with amino surfaces from amphiphilic AB‐type diblock copolymers composed of poly(glycolic acid lysine) segments and polylactide segments

Amphiphilic AB‐type diblock copolymers composed of hydrophobic poly(L ‐lactide) (PLA) segments and hydrophilic poly(glycolic acid lysine) [poly(Glc‐Lys)] segments with amino side‐chain groups self‐associated to form PLA‐based polymeric micelles with amino surfaces in an aqueous solution. The average diameter of the loose core–shell polymeric micelles for poly(Glc‐Lys) [number‐average molecular weight (M_n) = 1240]‐b‐PLA (M_n = 7000) obtained by a dimethyl sulfoxide/water dialysis method was estimated to be about 50 nm in water by dynamic light scattering measurements. The size and shape of the obtained polymeric micelles were further observed with transmission electron microscopy and atomic force microscopy. To investigate the possibility of applying the obtained PLA‐based polymeric micelles as bioabsorbable vehicles for hydrophobic drugs, we tested the entrapment of drugs in poly(Glc‐Lys) (M_n = 1240)‐b‐PLA (M_n = 7000) micelles and their release with doxorubicin as a hydrophobic drug. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1426–1432, 2002     

High accuracy measurement of isotope ratios of molybdenum in some terrestrial molybdenites

The isotope ratios of molybdenum in molybdenites were studied. A special triple filament technique was used to obtain stable and lasting signals for MO⁺ . There are no differences bigger than ±0.4 parts per IO4 among four samples and the standard.