Ultrahigh‐molecular‐weight‐polyethylene‐fiber surface treatment by electron‐beam‐irradiation‐induced graft polymerization and its effect on adhesion in a styrene–butadiene rubber matrix

Aiming to develop a high‐performance fiber‐reinforced rubber from styrene–butadiene rubber (SBR), we applied a special technique using electron‐beam (EB)‐irradiation‐induced graft polymerization to ultrahigh‐molecular‐weight‐polyethylene (UHMWPE) fibers. The molecular interaction between the grafted UHMWPE fibers and an SBR matrix was studied through the evaluation of the adhesive behavior of the fibers in the SBR matrix. Although UHMWPE was chemically inert, two monomers, styrene and N‐vinyl formamide (NVF), were examined for graft polymerization onto the UHMWPE fiber surface. Styrene was not effective, but NVF was graft‐polymerized onto the UHMWPE fibers with this special method. A methanol/water mixture and dioxane were used as solvents for NVF, and the effects of the solvents on the grafting percentage of NVF were also examined. The methanol/water mixture was more effective. A grafting percentage of 16.4% was the highest obtained. This improved the adhesive force threefold with respect to that of untreated UHMWPE fibers. These results demonstrated that EB irradiation enabled graft polymerization to occur even on the inert surface of UHMWPE fibers. However, the mechanical properties of the fibers could be compromised according to the dose of EB irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2595–2603, 2004     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Linear and Nonlinear Optical Properties Of Racemic (±)2-(α-Methylbenzylamino)-5-Nitropyridine Single Crystals

Linear and nonlinear optical properties of racemic (±)2-(α-methylbenzylamino)-5-nitropyridine ((±)MBANP) single crystals have been comprehensively investigated and compared with those of the enantiomorph (–)2-(α-methylbenzylamino)-5-nitropyridine ((–)MBANP) crystals. (±)MBANP crystal exhibits very high chemical and physical stability, but relatively small nonlinear optical coefficients (d₃₁ = 6.8 pm/V, d₃₂ = 4.7 pm/V, d₃₃ = 0.84 pm/V). A comparison between the nonlinear optical coefficients of (±)MBANP and (–)MBANP demonstrates the validity of the oriented-gas model in molecular crystals that neglects all the contributions from intermolecular interaction.     

Different acute effects of oral and intratracheal administration of disodium arsenate and gallium arsenide on heme synthesis in rats

The acute influences of arsenic compounds on the metabolism of porphyrins and heme in various organs of rats after oral or intratracheal administration of disodium arsenate (Na₂HAsO₄) and gallium arsenide (GaAs) were examined and compared. For the oral administration experiments, 21 or 84 mg of Na₂HAsO₄, or 2 or 4 g of GaAs, per cm³ saline per kg body weight of each animal was administered to Jcl: Wistar male rats and the organs were removed after exsanguination from the vein of the right axilla under anesthesia with ether, 16 h after administration. In the case of intratracheal administration, rats given 8.2 or 16.4 mg of Na₂HAsO₄, or 0.2 or 0.4 g GaAs per cm³ saline per kg body weight were examined under the same experimental conditions as for the administration route. Increase in the body weight of rats was suppressed after intratracheal administration of the two arsenic compounds. In these rats the hematocrit value increased significantly. These changes were not shown by the orally administered rats. Elevation in δ-aminolevulinate synthase (ALA-S, EC 2.3.1.37) activity in erythroblasts by Na₂HAsO₄ was much higher after intratracheal administration than after oral administration. Suppression in the activities of δ-aminolevulinate dehydratase (ALA-D, EC 4.2.1.24) and porphobilinogen deaminase (PBG-D, EC 4.3.1.8) in peripheral erythrocytes by Na₂HAsO₄ and GaAs were stronger by intratracheal administration than by the oral route. Influences of GaAs on the activity of PBG-D in rat liver were shown to be more effective by oral administration than by the intratracheal route. Oral administration of Na₂HAsO₄ and GaAs had a stronger suppression effect on the activities of ALA-D and PBG-D in rat kidney. It seems from these results that the different extents of the influence of arsenic compounds might depend on the routes of intake.     

Theoretical framework and experimental procedure for modelling mesoscopic volume fraction stochastic fluctuations in fiber reinforced composites

Many engineering materials exhibit fluctuations and uncertainties on their macroscopic mechanical properties. This randomness results from random fluctuations observed at a lower scale, especially at the meso-scale where microstructural uncertainties generally occur. In the present paper, we first propose a complete theoretical stochastic framework (that is, a relevant probabilistic model as well as a non-intrusive stochastic solver) in which the volume fraction at the microscale is modelled as a random field whose statistical reduction is performed using a Karhunen–Loeve expansion. Then, an experimental procedure dedicated to the identification of the parameters involved in the probabilistic model is presented and relies on a non-destructive ultrasonic method. The combination of the experimental results with a micromechanical analysis provides realizations of the volume fraction random field. In particular, it is shown that the volume fraction can be modelled by a homogeneous random field whose spatial correlation lengths are determined and may provide conditions on the size of the meso-volumes to be considered.     

Time-resolved cavity ringdown spectroscopy on nanoparticle generation in a SiH4–H2 VHF plasma

Time-resolved cavity ringdown (τ-CRD) spectroscopy has been applied to monitor the silyl (SiH₃) radicals and nanoparticles in a pulsed very high frequency (VHF) silane-hydrogen plasma under microcrystalline silicon (μc-Si:H) deposition conditions. The measured cavity loss reveals four time intervals (I up to VI) in the first 4 s of the plasma pulse. By variation of the laser wavelength, it is demonstrated that the small cavity loss at 220 nm reflects the SiH₃ absorption in interval I. In intervals II and III, an additional cavity loss appears. This additional cavity loss corresponds to Rayleigh and Mie scattering by growing nanoparticles. Interval IV reflects the loss of nanoparticles between the electrodes during the afterglow of the plasma pulse. The evolution of the nanoparticle generation determined from the τ-CRD measurements are further confirmed by additional scanning electron microscopy analyses on the nanoparticles created in the plasma pulse.     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.