Novel synthesis of the ocular age pigment A2-E: new method for substituted pyridine synthesis via azaelectrocyclization

[reaction: see text] The formal synthesis of the ocular age pigment A2-E was achieved by the efficient one-pot preparation of the substituted pyridine, which involves the aza-6pi-electrocyclization of the Schiff base derived from (E)-3-carbonyl-2,4,6-trienal followed by oxidation.     

Pulse radiolysis of 4,4'-bipyridyl aqueous solutions at elevated temperatures: spectral changes and reaction kinetics up to 400 degrees C

The spectral changes as well as the reaction kinetics of the transient species of 4,4'-bipyridyl (4,4'-bpy) have been experimentally investigated by pulse radiolysis techniques up to 400 degrees C. The results show that the transient species such as OH adduct 4,4'-bpyOH*, monoprotonated electron adduct 4,4'-bpyH*, and doubly protonated electron adduct 4,4'-bpyH2+* have 15-20 nm blue shifts from room temperature to 400 degrees C. For a deaerated neutral solution of 4,4'-bpy in the presence of tert-butyl alcohol, ethanol, or NaCOOH, the doubly protonated electron adduct is the main transient species at room temperature. But at temperatures > 350 degrees C, a monoprotonated form, the N-hydro radical 4,4'-bpyH*, becomes predominant. Interestingly, at room temperature, CO2-* could not efficiently react with 4,4'-bpy, but the reaction was accelerated with increasing temperature; at 350 degrees C, this reaction completed within 2 mus. Using an alkaline solution (pH = 11.5) of 4,4'-bpy in the presence of tert-butyl alcohol, we studied the N-hydro radical 4,4'-bpyH* from room temperature to 400 degrees C at 25 MPa. An estimation of the temperature-dependent G(e(aq)-) at 25 MPa agrees with our previous result with methyl viologen as a scavenger.     

Synthesis,Properties, and Redox Behavior of 1,1,4,4‐Tetracyano‐2‐ferrocenyl‐1,3‐butadienes Connected by Aryl,Biaryl, and Teraryl Spacers

Aryl‐substituted 1,1,4,4‐tetracyano‐1,3‐butadienes (FcTCBDs) and bis(1,1,4,4‐tetracyanobutadiene)s (bis‐FcTCBDs), possessing a ferrocenyl group on each terminal, were prepared by the reaction of a variety of alkynes with tetracyanoethylene (TCNE) in a [2+2] cycloaddition reaction, followed by retro‐electrocyclization of the initially formed [2+2] cycloadducts (i.e., cyclobutene derivatives). The characteristic intramolecular charge transfer (ICT) between the donor (ferrocene) and acceptor (TCBD) moieties were investigated by using UV/Vis spectroscopy. The redox behaviors of FcTCBDs and bis‐FcTCBDs were examined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), which revealed their properties of multi‐electron transfer depending on the number of ferrocene and TCBD moieties. Moreover, significant color changes were observed by visible spectroscopy under the electrochemical reduction conditions.     

Asymmetric Michael addition of 2-alkoxyphenyl α-substituted nitroacetates to non-prochiral α,β-unsaturated carbonyl compounds catalyzed by podand-type alkali metal 2′-substituted 1,1′-binaphthalen-2-oxides

The asymmetric Michael addition of 2-alkoxyphenyl α-substituted nitroacetates to non-prochiral α,β-unsaturated carbonyl compounds catalyzed by 10 mol % of sodium 2′-[2-(2-methoxyethoxy)ethoxy]-1,1′-binaphthalen-2-oxide gave the desired adducts in high yields with up to 95% ee.     

Preparation of Molecule‐Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves

Microdevices designed for practical environmental pollution monitoring need to detect specific pollutants such as dioxins. Bisphenol A (BPA) has been widely used as a monomer for the synthesis of polycarbonate and epoxy resins. However, the recent discovery of its high potential ability to disrupt human endocrine systems has made the development of smart systems and microdevices for its detection and removal necessary. Molecule‐responsive microsized hydrogels with β‐cycrodextrin (β‐CD) as ligands are prepared by photopolymerization using a fluorescence microscope. The molecule‐responsive micro‐hydrogels show ultra‐quick shrinkage in response to target BPA. Furthermore, the flow rate of a microchannel is autonomously regulated by the molecule‐responsive shrinking of their hydrogels as smart microvalves.

     

Chronopotentiometric determination of the outer-sphere association constants of substitution-inert metal complexes

Summary A new method for the determination of association constants by the measurement of chronopotentiometric transition time has been developed and applied to the study on the outer-sphere association of some substitution-inert complex cations with sulphate ions. The association constants were determined from the change in transition time as function of the concentration of sulphate ions at ionic strength 0.1 (NaClO₄) and 25° C: 93 ±8 for [Co(NH₃)₆]³⁺SO₄ ^2–, 99 ±15 for [Co(en)₃]³⁺SO₄ ^2–, 61 ±7 for [Cr(NH₃)₆]³⁺SO₄ ^2– and 58 ±8 for [Cr(en)₃]³⁺SO₄ ^2–. The ratios of the diffusion coefficients of the univalent ion-pairs and tervalent substitution-inert complex cations were also obtained. From these ratios the diffusion coefficients of the univalent ion-pairs were calculated, which were found to differ not greatly from those of univalent complex ions with similar structures.

---

Zusammenfassung Eine neue Methode zur Bestimmung von Assoziationskonstanten aus den Transitionszeiten chronopotentiometrischer Messungen wurde entwickelt. Sie wurde zur Untersuchung der Assoziation von Sulfationen in zweiter Sphäre an koordinativ abgesättigten Komplex-Kationen herangezogen. Die Assoziationskonstanten wurden aus der Abhängigkeit der Transitionszeit von der Sulfatkonzentration in Medien der Ionenstärke 0,1 (NaClO₄) und bei 25° C bestimmt. Man erhält folgende Werte: 93±8 für [Co(NH₃)₆]³⁺SO₄ ^2–, 99±15 für [Co(en)₃]³⁺SO₄ ^2–, 61±7 für [Cr(NH₃)₆]³⁺SO₄ ^2– und 58±8 für [Cr(en)₃]³⁺SO₄ ^2–. Die Verhältnisse der Diffusionskoeffizienten der einwertigen Ionenpaare zu denen der dreiwertigen Komplex-Kationen wurden ebenfalls bestimmt. Aus diesen Verhältnissen lassen sich die Diffusionskoeffizienten der Ionenpaare berechnen. Man erhält eine gute Übereinstimmung mit den Werten für einwertige Komplexionen mit ähnlicher Struktur.

---

---

Dedicated to Prof. Dr. M. von Stackelberg on his 70th birthday.     

A New Type of Photorearrangement of γ-Hydroxy-α, β, δ, ε-dienone

A new type of photorearrangement of the γ-hydroxy-α, β, δ, ε-dienone, vomifoliol acetate ( 2 ) to the diketone 4 is described, and its facile rearrangement is compared with that of desoxyvomifoliol acetate ( 3 ).     

Improvement of corrosion resistance of carbon steel using chemical vapor deposition from the mixture of Mo(CO)6 and Cr(CO)6 with an ArF-excimer laser

The corrosion resistance of carbon steel has been improved by the deposition from the mixture of Mo(CO)₆ and Cr(CO)₆ as well as from each carbonyl alone with an ArF-excimer laser (193 nm). The corrosion resistance attained by coating with the films from the mixture is higher than from Mo(CO)₆ alone, while lower than from Cr(CO)₆ alone. While the corrosion resistance increases with beam intensity monotonically over the range 4–25 MW cm^–2 for the deposition from Cr(CO)₆ alone, it tends to decrease slightly above 15 MW cm^–2 for the deposition from Mo(CO)₆ alone and from the mixture. SEM (Scanning Electron Microscope) photographs show that the films from each carbonyl and their mixture consist of small grains that are more densely packed at higher beam intensities. The comparison of the film thickness evaluated from sputtering time to remove the films with that from direct observation with SEM suggests that the density of the film increases with beam intensity. In the films deposited from the mixture, molybdenum is preferentially incorporated from the gas phase. Present name: Department of Quantum Engineering and Systems Science     

1,5]-H shift of aldehyde hydrogen in dienal compounds to produce ketenes

In 3-ethoxycarbonyl-2,4-dienal compounds, a thermal [1,5]-H shift of aldehyde hydrogen easily proceeded to produce the corresponding vinyl ketenes due to the remarkable substituent effect caused by the C3 ester group. The produced ketenes were captured by an alcohol and olefins to afford the corresponding esters and four-membered ring compounds, respectively.