Synthesis and characterization of molybdenum incorporated mesoporous aluminophosphate

A synthesis of molybdenum incorporated mesoporous aluminophosphate with long-chain n-alkylamine as template material had been prepared under non-aqueous condition. These materials were extensively characterized by using X-ray diffraction (XRD), nitrogen sorption isotherms, nuclear magnetic resonance of ²⁷Al and ³¹P (NMR), inductive coupled plasma (ICP), electron spin resonance (ESR), Fourier transform infrared (FTIR) and thermogravimetric-differential thermal analysis (TG-DTA). Morphology of the materials had been observed by using transmission electron microscope (TEM) that revealed the mesoporous materials possessed wormhole-like structures. Alkaline solvent extraction using n-butylamine/ethanol had been efficiently removed the n-alkylamine from the mesoporous samples which yielded BET surface areas around 550-730 m²/g. BJH analysis showed a narrow pore size distribution which increased with increasing of the carbon chain length of alkylamine (template). Valence state and coordination of the molybdenum in the obtained samples were investigated by using ESR and FTIR where it was found that Mo⁴⁺ and Mo⁶⁺ molybdenum species existed in the molybdenum incorporated mesoporous aluminophosphate in tetrahedral coordination.     

Temporal analysis of products (TAP) study on oxygen storage properties over Pt−Rh/CeO2 catalyst

The oxygen storage capacity of CeO₂, Ce_0.9Pr_0.1O₂, Pt?Rh/CeO₂ and Pt?Rh/Ce_0.9Pr_0.1O₂ was investigated by conventional GC pulse method and transient pulse techniques. It is shown that incorporation of PrO_y into CeO₂ matrix strongly promotes oxygen storage capacity (OSC) measured using the transient pulse technique. The improvement of OSC at low temperature is observed in Pt?Rh loaded onto CeO₂ and Ce?Pr catalysts.     

Numerical Study on Population Inversion and Lasing Conditions in an Optically Thick Recombining Helium Plasma

Lasing conditions for He I in a cold recombining helium plasma are numerically discussed including optical thicknesses. A collisional radiative model is used to calculate population densities. We discuss the effect of self absorptions by the background residual gas on the lasing conditions quantitatively. The optical thickness is essential in the calculation and affects the population inversions between level pairs of the singlet state drastically, while those of the triplet state are not affected very much. In the optically thin plasma, the laser lower levels of the singlet state depopulate mainly through radiative transitions. On the other hand, they depopulate mainly through electron collisional deexcitations in the optically thick plasma. Results of the calculations are verified by the spectroscopic observations of an arc-heated magnetically trapped expanding plasma jet generator which we developed. The requirement for the background pressure in which the lasing is possible is discussed quantitatively.     

Electrochemical detection of lectin using a galactosamine labeled with daunomycin

To detect a lectin from soybean, an electrochemical procedure was developed by the use of a labeling of galactosamine. Because the lectin has binding sites to galactosamine, galactosamine labeled with daunomycin having electroactivity was prepared. When labeled galactosamine (LG) combines with lectin, the part of daunomycin is taken in the binding sites of the lectin and becomes electroinactive. Therefore, the concentration of the lectin can be estimated by measuring the peak current of the LG. On the other hand, a competitive reaction to the lectin of galactosamine and the LG makes a detection of galactosamine possible. This method has merit that does not require a separation procedure of the free LG from the bound one. An effect of length of spacer between daunomycin and galactosamine was also investigated. It was found that adsorption of reagent on the electrode increased due to introduction of the spacer. Furthermore, the electrode response of the LG was influenced by the type of the spacer.     

Structural and Magnetic Study of N2, NO,NO2, and SO2 Adsorbed within a Flexible Single‐Crystal Adsorbent of [Rh2(bza)4(pyz)]n

The crystalline one‐dimensional compound, [Rh^II₂(bza)₄(pyz)]_n ( 1 ) (bza=benzoate, pyz=pyrazine) demonstrates gas adsorbency for N₂, NO, NO₂, and SO₂. These gas‐inclusion crystal structures were characterized by single‐crystal X‐ray crystallography as 1 ?1.5 N₂ (298 K), 1 ?2.5 N₂ (90 K), and 1 ?1.95 NO (90 K) under forcible adsorption conditions and 1 ?2 NO₂ (90 K) and 1 ?3 SO₂ (90 K) under ambient pressure. Crystal‐phase transition to the P space group that correlates with gas adsorption was observed under N₂, NO, and SO₂ conditions. The C2/c space group was observed under NO₂ conditions without phase transition. All adsorbed gases were stabilized by the host lattice. In the N₂, NO, and SO₂ inclusion crystals at 90 K, short interatomic distances within van der Waals contacts were found among the neighboring guest molecules along the channel. The adsorbed NO molecules generated the trans‐NO???NO associated dimer with short intermolecular contacts but without the conventional chemical bond. The magnetic susceptibility of the NO inclusion crystal indicated antiferromagnetic interaction between the NO molecules and paramagnetism arising from the NO monomer. The NO₂ inclusion crystal structure revealed that the gas molecules were adsorbed in the crystal in dimeric form, N₂O₄.     

Numerical analysis of the behavior of hydrogen added into a free-burning arc

The objective of the present work is to investigate the behavior of hydrogen in an atmospheric-pressure free-burning argon are when a small amount of hydrogen is added into the arc. A two-dimensional model calculation is carried out under the assumption that the ionization reaction of argon is in equilibrium and the reactions among hydrogen molecules, atoms, ions, and electrons are not necessarily in equilibrium. This calculation gives the following conclusion. The hydrogen mass fraction of 0.001 is too small to affect the flow and temperature fields markedly, and the concentration ratios among the hydrogen species are in equilibrium in the greater part of the arc region except for same parts with a steep temperature gradient. The hydrogen mass Junction, however, is not uniform in the me and, especially in the high-temperature region near the cathodes, over three dynes mass fraction of the hydrogen accumulates and flows downstream to cause a high flux of hydrogen atom toward the anode. This phenomena can be explained by the large difference between the diffusivity of hydrogen atom and that of hydrogen ion in argon ion.     

Selective generation of organic aggregates included within metal-organic micropores through vapor adsorption

The ethanol vapor adsorption behavior and the inclusion crystal structure of a 1D-transformable coordination polymer host were characterized. The adsorption jump was observed during phase transition or two-phase equilibrium with abnormal adsorption enthalpy caused by the nature of "mass induced phase transition." The included ethanol guests selectively form O-H...O hydrogen bonded pairs inside channels, suggesting selective construction of a specific cluster/aggregate in pores under control of thermodynamic factors and cooperative intermolecular interactions among the guest and channel surface.     

Alcohol‐Vapor Inclusion in Single‐Crystal Adsorbents [MII2(bza)4(pyz)]n (M=Rh,Cu): Structural Study and Application to Separation Membranes

The vapor absorbency of the series of alcohols methanol, ethanol, 1‐propanol, 1‐butanol, and 1‐pentanol was characterized on the single‐crystal adsorbents [M^II₂(bza)₄(pyz)]_n (bza=benzoate, pyz=pyrazine, M=Rh ( 1 ), Cu ( 2 )). The crystal structures of all the alcohol inclusions were determined by single‐crystal X‐ray crystallography at 90 K. The crystal‐phase transition induced by guest adsorption occurred in the inclusion crystals except for 1‐propanol. A hydrogen‐bonded dimer of adsorbed alcohol was found in the methanol‐ and ethanol‐inclusion crystals, which is similar to a previous observation in 2 ?2EtOH (S. Takamizawa, T. Saito, T. Akatsuka, E. Nakata, Inorg. Chem. 2005 , 44, 1421–1424). In contrast, an isolated monomer was present in the channel for 1‐propanol, 1‐butanol, and 1‐pentanol inclusions. All adsorbed alcohols were stabilized by hydrophilic and/or hydrophobic interactions between host and guest. From the combined results of microscopic determination (crystal structure) and macroscopic observation (gas‐adsorption property), the observed transition induced by gas adsorption is explained by stepwise inclusion into the individual cavities, which is called the “step‐loading effect.” Alcohol/water separation was attempted by a pervaporation technique with microcrystals of 2 dispersed in a poly(dimethylsiloxane) membrane. In the alcohol/water separation, the membrane showed effective separation ability and gave separation factors (alcohol/water) of 5.6 and 4.7 for methanol and ethanol at room temperature, respectively.     

Voltammetric detection of avidin and biotin by biotin labeled with cysteine

An avidin-biotin assay was developed from a voltammetric procedure using biotin labeled with cysteine. Mercury(II) as a marker was used to detect avidin and biotin, because the oxidation wave of mercury decreases when the cysteine part of labeled biotin(LB) complexes with mercury(II).The formation of the mercury(II)-cysteine complex is suppressed when the LB binds to the biotin site of avidin. Accordingly, the concentration of avidin can be estimated from the increasing mercury peak current. Detection of biotin is also carried out by a competitive reaction of biotin and the LB to the binding site on avidin, where the addition of biotin decreases the peak current of mercury. Limits of detection for avidin and biotin were in the 10^–9 mol/L range. The length of the spacer between the cysteine and biotin was investigated. It was observed that the strength of binding increased with increasing length of spacer. Size considerations rules out steric influences, so it is suggested that the binding constant depends on hydrophobic interactions in the binding site.     

Synthesis of All Stereoisomers of Monomeric Spectomycin A1/A2 and Evaluation of Their Protein SUMOylation-Inhibitory Activity

A synthetic methodology to access all possible stereoisomers of spectomycin A1 (SMA1) and A2 (SMA2) has been established through late-stage diversification. The key reaction for the construction of all four diastereomers is an intramolecular cyclization based on the umpolung of π-allyl palladium species with bis(pinacolato)diborane (B₂(pin)₂). Silyl group assisted direct benzylic oxidation of each isomer enabled construction of the fragile β-hydroxytetralone skeleton to provide the SMAs. The relative and absolute stereochemistry of SMA2 was also determined, and the absolute stereochemistry of SMA1 was extrapolated based on the optical rotation of SMA2. The axial chirality of SMAs is discussed based on circular dichroism spectra and DFT calculations, and it is concluded that the M isomer is predominant in solution. Biochemical assessment of all isomers in vitro revealed that the C9 hydroxyl group and dimeric structure were both important for protein SUMOylation-inhibitory activity.