SOFC中干甲烷浓度对Ni-YSZ阳极上反应的影响

为探讨固体氧化物燃料电池(solid oxide fuel cell, SOFC)中干甲烷浓度对反应的影响,采用色谱在线测量阳极尾气,总结阳极尾气的变化规律。在此基础上,分析干甲烷在固体氧化物燃料电池Ni-YSZ阳极上的反应,寻找干甲烷浓度与电流对电池阳极反应影响的数学关系。结果表明,随着电流密度的增加,低浓度甲烷按顺序发生CH₄+O^2- → CO+2H₂+2e^-、CH₄+2O^2- → CO+H₂O+H₂ +4e^-、CH₄+3O^2- → CO+2H₂O + 6e^-、CH₄+4O^2- → CO₂+2H₂O+8e^-反应,高浓度甲烷只发生甲烷的第一个氧化反应,中浓度甲烷发生前两个或前三个反应。依据法拉第第一定律及反应物之间的关系,确定甲烷的低、中、高浓度的判定依据分别为:q_v(CH₄)≤I/(4F)、I/(4F)≤q_v(CH₄)≤I/(2F)、q_v(CH₄)≥I/(2F)。     

Performance of cathode-supported SOFC with Ni0.5Cu0.5–CGO anode operated in humidified hydrogen and in low-concentration dry methane

A Ni_0.5Cu_0.5–CGO (Ce_0.8Gd_0.2O_1.9) anode in a LSM ((La_0.75Sr_0.25)_0.95MnO_3?δ )–CGO cathode-supported SOFC is tested in humidified H₂ (3% H₂O) and in low concentration of dry methane, respectively. After co-sintering at 1,300?°C, it was found that the A-site-deficient LSM effectively hindered the formation of La₂Zr₂O₇ or SrZrO₃. The OCVs of the cell are as high as 1.132, 1.14, and 1.147?V in humidified H₂ and 1.314, 1.269, and 1.2?V in 14.8% of dry methane at 850, 800 and 750?°C, respectively, indicating that the ScSZ electrolyte film prepared by the present method is dense enough. The corresponding peak power densities are 0.396, 0.287, and 0.19?W?cm^?2 in humidified H₂ and 0.249, 0.164, and 0.096?W?cm^?2 in 14.8% of dry methane at 850, 800, and 750?°C, respectively. The prepared cathode-supported SOFC with NiCu–CGO bimetallic anode shows long-term stability when dry methane is used as fuel.     

固定化Sn/氯化胆硷络合物制备Sn-β分子筛催化剂用于葡萄糖-果糖异构化反应

在水溶液中锡盐与β分子筛金属化过程中很容易水解为氢氧化物,因此,制备高度分散的、以孤立形式存在的锡物种非常具有挑战性.我们先采用SnCl2/氯化胆硷(ChCl)络合物将锡物种固定在高硅的商品化的β分子筛上,然后焙烧就可很方便地在水溶液条件下制得了高度分散于β分子筛上的锡物种.电镜照片、紫外-可见光光谱和X射线衍射结果证实了这一点.ChCl的存在促进了锡物种与分子筛的结合.担载(1-2)wt%Sn的β分子筛在葡萄糖-果糖异构化反应中表现出较高的催化活性和选择性.     

Study of the fluid flow characteristics in a porous medium for CO2 geological storage using MRI

The objective of this study was to understand fluid flow in porous media. Understanding of fluid flow process in porous media is important for the geological storage of CO₂. The high-resolution magnetic resonance imaging (MRI) technique was used to measure fluid flow in a porous medium (glass beads BZ-02). First, the permeability was obtained from velocity images. Next, CO₂–water immiscible displacement experiments using different flow rates were investigated. Three stages were obtained from the MR intensity plot. With increasing CO₂ flow rate, a relatively uniform CO₂ distribution and a uniform CO₂ front were observed. Subsequently, the final water saturation decreased. Using core analysis methods, the CO₂ velocities were obtained during the CO₂–water immiscible displacement process, which were applied to evaluate the capillary dispersion rate, viscous dominated fractional flow, and gravity flow function. The capillary dispersion rate dominated the effects of capillary, which was largest at water saturations of 0.5 and 0.6. The viscous-dominant fractional flow function varied with the saturation of water. The gravity fractional flow reached peak values at the saturation of 0.6. The gravity forces played a positive role in the downward displacements because they thus tended to stabilize the displacement process, thereby producing increased breakthrough times and correspondingly high recoveries. Finally, the relative permeability was also reconstructed. The study provides useful data regarding the transport processes in the geological storage of CO₂.     

A facile one-step way for extraction of nanocellulose with high yield by ball milling with ionic liquid

93.1% yield of nanocellulose was successfully extracted from cellulose powder (CP) by planetary ball milling in the presence of ionic liquid (IL) of 1-butyl-3-methylimidazolium chloride (BMIMCl). The morphology of nanofibrillated cellulose present in fibrous network with 10–25 nm in diameter and micrometer scale in length and the chemical composition and crystal structure were maintained as cellulose type I. At 600 °C degradation temperature, the residue amount of the obtained nanocellulose was about 55% more that of CP, implying it had higher thermal stability. The used BMIMCl was recovered and reused at least 4 times. The nanocellulose obtained by using the recovered IL also demonstrated the same properties as those from the fresh one. For comparison, another kind of IL of 1-ethyl-3-methylimidazolium acetate (EMIMOAc) was also used in this study. It is found that the ball milling of cellulose in the presence of IL is an effective and environmental friendly way for the production of nanocellulose with high yield.