Singular limits for a 4-dimensional semilinear elliptic problem with exponential nonlinearity

Using some nonlinear domain decomposition method, we prove the existence of branches of solutions having singular limits for some 4-dimensional semilinear elliptic problem with exponential nonlinearity.     

Electrochemical Sensor Based on Thioether Oligomer Poly(N‐vinylpyrrolidone)‐modified Gold Electrode for Bisphenol A Detection

Presently, bisphenol A (BPA) has been added to the list of substances of very high concern as endocrine disruptors. According to the literature, exposure to bisphenol A even at low doses may result in adverse health effects. In this study, electrochemical sensor of Bisphenol A based on thioether DDT‐Poly(N‐vinylpyrrolidone) oligomer has been developed. The thioether oligomer, which is capable of recognizing BPA, was prepared and used for gold electrode modification. The characterization of the modified gold electrode and the synthesized thioether oligomer were carried out by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), Fourier‐transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR) and Size exclusion chromatography (SEC). Obtained results indicate that the modified electrode shows good electrochemical activity, good sensitivity and reproducibility for BPA detection. It exhibited a good linear relationship ranging from 1 to 20 pg/mL, and the detection limit was found to be 1.9 pg/mL at S/N=3. Several interfering species such as hydroquinone, phenol and resorcinol were used and their behaviors on the modified gold electrode were investigated.     

Electrochemical Capacitive K+ EMIS Chemical Sensor Based on the Dibromoaza[7]helicene as an Ionophore for Potassium Ions Detection

A K⁺‐sensitive capacitive electrolyte‐membrane‐insulator‐semiconductor (EMIS) based on a novel dibromoaza[7]helicene ionophore has been developed. An ion‐sensitive membrane based on polyvinylchloride (PVC) doped with the ionophore was deposited on the Si₃N₄/SiO₂/Si‐p/Cu‐Al transducer. The properties of the K⁺‐EMIS chemical sensor were investigated by electrochemical impedance spectroscopy (EIS). All the developed devices upon being tested have shown good sensitivity and linearity responses within the range 10^?6 M to 10^?1 M of potassium activity, with good selectivity over a wide variety of other cations (Na⁺, Li⁺, Cu²⁺, Ca²⁺, and Mg²⁺). To our knowledge, this is the first time that a capacitive field‐effect sensor has been fabricated using helicene as a carrier for K⁺‐detection, combined with the structure: Si₃N₄/SiO₂/Si‐p/Cu‐Al as a transducer.     

Polymer micromixers bonded to thermoplastic films combining soft‐lithography with plasma and aptes treatment processes

Over the past few years, a growing interest on covalent bonding of polydimethylsiloxane (PDMS) microfluidic devices to thermoplastic films has developed due to reduced costs, biocompatibility, and flexibility. The silane reagent, 3‐aminopropyltriethoxysilane (APTES) has been applied to create this bonding. Here, we report on the fabrication of replica PDMS micromixer devices from a silicon mold using soft lithography that is rapid, facile, and cost‐effective to manufacture. After replica molding, the PDMS micromixer devices were bonded to the APTES‐activated thermoplastic films of polyimide, polyethylene terephthalate, and polyethylene naphthalate. Characterization of these thermoplastic surfaces was analyzed by contact angle measurement, surface free energy, and X‐ray photoelectron spectroscopy. To demonstrate the functionality of this technology, we have analyzed the PDMS micromixers by a peel test, nonleakages, and mixing with the injection of inks, a surfactant, and varying pH solutions. To our knowledge, this is the first reported example in literature of the PDMS–APTES–thermoplastic films preparation that integrates a complex micromixer device. Here, we have established that the hydrophobicity of both sealed polymers required alteration in order for dispersion of a polar liquid in the mixing loops. The application of a polar solvent before injection can remedy this ill effect formulating a hydrophilic micromixer. These preliminary results demonstrate the feasibility of the fabrication technology, bonding technique, and application of the micromixer that, once optimized, can eventually integrate more components to formulate a lab‐on‐a‐chip with the fabrication of gold microelectrodes for biological analysis of blood or plasma. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Construction of singular limits for four-dimensional elliptic problems with exponentially dominated nonlinearity

The authors consider the existence of singular limit solution for a family of nonlinear elliptic problems with exponentially dominated nonlinearity and Navier boundary condition.     

Electrochemical urea biosensor based on Proteus mirabilis urease immobilized over polyaniline PANi-Glassy carbon electrode

In this study, a novel, sensitive electrochemical enzyme-based biosensor for urea detection was presented. This biosensor combines a three-electrode system consisting of a classic Glassy Carbon Electrode (GCE) as the working electrode, a platinum counter electrode, and Ag/AgCl as the reference electrode. To construct this urea platform, a GCE was modified with a polyaniline (PANi) film. Then, bacterial urease from Proteus mirabilis was immobilized on the modified GCE (P_m-Urease-PANi-GCE). For the characterization of surface modification, Cyclic Voltammetry (CV) and Scanning Electron Microscope (SEM) were applied, while the Square Wave Voltammetry (SWV) technique was performed for urea detection. The main analytical characteristics of the P_m-Urease-PANi-GCE biosensor showed a good linear range from 0.1 to 10 mM of urea, a limit of detection (LOD) of 0.1 mM, a Michaelis-Menten K_m of 0.23 mM, and a sensitivity value 46 μA/mM/cm². This biosensor allows the detection of urea in solutions, and it could be improved for further medical, environmental, or engineering applications.     

Synthesis of diamine functionalized mesoporous organosilicas with large pores

Hybrid mesoporous silicas functionalized with ethylenediamine groups have been synthesized via sol–gel process under different conditions. The best textural properties, with pore diameters up to 170 Å, have been obtained using carboxylic acids as catalysts in propanol as solvent without the need for any surfactant. The presence of the diamine moiety has been demonstrated by different characterization techniques, and the materials have been used in the adsorption of copper cations. The adsorption capacity of all the solids is high (up to 1.87 mmol/g and up to 2.47 Cu atoms/nm²), with important variations in the properties of the silica surface, besides the role of the immobilized diamine moieties as ligand for copper. In general the surface area seems to be the most important feature controlling the adsorption.