A Novel Magnetic Polyethylene Glycol Nanocomposite based on Graphite Reinforcement Carbon Paste Electrode for Voltammetric Determination of Perindopril L-arginine

Journal of Analytical Chemistry - The present study reports the development of a magnetic polyethylene glycol nanocomposite based on graphite reinforcement carbon paste electrode for the sensitive...     

Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

Synthesis of New Dibenzosulfide and Dibenzosulfoxide Macrocyclic Compounds

Some new dibenzosulfo, dibenzosulfoxo macrocyclic diamides are synthesized.     

Radiation pasteurised oil palm empty fruit bunch fermented with Pleurotus sajor-caju as feed supplement to ruminants

In solid state fermentation, Pleurotus sajor-caju has been found to be able to degrade at least 30% oil palm empty Fruit Bunch (EFB) fibre leaving 70 % useful materials. Conditions under which fermentation carried out were investigated. It was found that, in the temperature range between 25– 28 °C, relative ph between 6–8, moisture between 60–70 % and medium composition of CaCO₃: rice bran 2 %: 5 % were the optimum conditions. The results showed in fermented products that, there were substantial reduction in cellulosic component such as Crude Fiber (CF, 18 %); Acid Detergent Fibre (ADF, 45 %), Neutral Detergent Fibre (NDF, 61 %) and Acid Detergent Lignin (ADL, 14 %). However, Crude Protein (CP, 10%) increased resulted from single cell protein enrichment of mycelial microbial mass. The mass reductions of substrate in fermentation process corresponds to the CO₂ released during fermentation. Hence, attributable to the decreased in content of CF, ADF, NDF, and ADL. The digestibility study has also been carried out to determine the useful level of this product to ruminant. Aflatoxin content was detected low in both the initial substrates and products. Based on nutritional value and low content of aflatoxin, the product is useful as a source of roughage to ruminant.     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Absorptiometric determination of sulphide ion

An absorptiometric method is described for sulphide ion, based on the green colour which is formed when sulphide ions are treated in ammoniacal solution with iron(III) and an excess of nitrilotriacetic acid. The recommended procedure can be applied from 1200 down to 8 ppm of sulphide and is interfered with seriously only by selenite from amongst seventeen other anions examined. The colour system is stabilized by an excess of sulphite. Suggestions are made about the nature of the colour body and its mechanism of production.     

Activity concentrations of 210Po in the soft parts of cockle (Anadara granosa)at Kuala Selangor, Malaysia

Polonium-210 has been measured in the soft parts of Anadara granosa purchased at Kuala Selangor, West Coast of Malaysia in August 2001, April 2002 and September 2002. It is shown that ²¹⁰Po is non-uniformly distributed within cockles of various sizes (i.e., 2.5, 3.0, 3.5 and 4.0 cm of shell length) and the concentration of ²¹⁰Po in the soft parts of cockle was significantly different (p<0.05) due to sampling date. The highest value was observed in the smallest cockle with a shell length of 2.5 cm (411.6±26.16 Bq/g dry wt.). It is clear that there is an allometric relationship between ²¹⁰Po activity concentration and individual cockle weight. This may reflect on the differences of metabolic rate and growth age of cockles. The mean activity concentration of ²¹⁰Po measured in Kuala Selangor filtered water were 1.75±0.17, 0.79±0.08 and 1.13±0.20 Bq/kg for August 2001, April 2002 and September 2002, respectively. The yield concentration factors for ²¹⁰Po in the soft parts of cockles varies from 27.3^. 10³ to 106.9^. 10³. This revised version was published online in July 2006 with corrections to the Cover Date.     

Titrimetric and spectrophotometric methods for the determination of cerium(IV) in aqueous solution

A titrimetric and spectrophotometric methods for cerium(IV) determination have worked out. The first method relies upon the treatment of cerium(IV) solution with an excessive amount of iodide; the liberated iodine is extracted into chloroform, then reduced to iodide. The latter is iodometrically determined after 6- or 36-fold amplification. The spectropho-tometric finish is based upon the reaction of the titled ion with iron(II), in the presence of hexacyanoferrate(II), to form an intense prussian blue color suitable for the trace determination of cerium(IV) ion.     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.