Growth of NaBi（WO4）2 Dendrite and Mechanism

The solid-liquid interface motion of NaBi（WO4）2 （NBWO） melt crystal growth is observed in an in situ system, in which the whole processes of interface transition from fiat interface and cellular to dendrite are visualized. The spacing of the dendrite under smaller temperature gradient turns out to be larger than that under larger temperature gradient, which is found to be sensitive to the temperature distribution. The mechanism of dendrite growth of NBWO is studied based on the model of the growth units of anion coordination polyhedra. The { 001} face has two apex links, so it shows higher stability and has high growth rate and forms the arm of dendrite, whereas the {010} face has only one apex link, and thus shows relative slower growth rate and firstly forms the branches.     

四阶累积量的MUSIC算法在海流测向中的应用

针对高频地波雷达系统OSMAR2000海流测向中海流元数不易估计的问题，利用四阶谱累积量MUSIC算法的空间谱结构特点，采用试探法确定信号源数并估计信号源的位置．通过对模拟海流和实测数据的处理实验表明，利用该算法可以较准确地估计出海流元的个数和方位，并且比传统MUSIC方法获得更小的角度估计方差，有效地反演了海洋表面流信息．     

Eucaglobulin, A New Complex of Gallotannin and Monoterpene from Eucalyptus globulus

EucalyPtusgl0bulusLabill.(Myrtaceae)isakindofmedicinalplantwidelydistributedintheYunnanpr0vinceofChina.ItSleaves,rootSandffoitShavebeenusedastraditionalremediesforthetreatmentofinfluenza,dysentery,enteritis,rheumatalgiaandbleeding.BesidesvolatileterpenoidconstituentSintheessential0iloftheleavesandfruits,theoccurrenceofanumber0fphloroglucinol-sesquiterpene-or-m0n0terpene-c0upledcomPoundsnamedmacrocarpals'andeugl0bals'intheleavesandbudshasbeenrepofted.Inordertostudythechendcalandbioactivecon…     

高固含量聚合物乳液制备方法新进展

高固含量一直是聚合物乳液制备追求的目标 ,本文将高固含量 (>6 0 % )聚合物乳液的制备方法按机理分为控制乳胶粒直径分布 ,增大乳胶粒直径和使乳胶粒发生形变三类 ,详细评述了各种制备方法的研究进展 ,并对高固含量乳液制备的发展进行了展望。     

QuEChERS/超高效液相色谱-串联质谱法同时测定水产品中四溴双酚A与六溴环十二烷

建立了同时测定水产品中四溴双酚A(TBBPA)和六溴环十二烷(HBCD)的超高效液相色谱-串联质谱方法。样品前处理采用QuEChERS方法,均质生物样品用水分散后加乙腈提取,经C_(18)分散固相萃取净化。采用CORTECS~?C_(18)色谱柱(4.6 mm×100 mm×2.7μm)分离,以甲醇-水为流动相进行梯度洗脱,流速为0.7 mL/min。采用电喷雾离子源,在负离子模式下以多反应监测(MRM)方式检测。结果表明,TBBPA和3种HBCD单体在0.5～500μg/L范围内线性良好,相关系数(r)大于0.998,检出限(LOD,S/N=3)和定量下限(LOQ,S/N=10)分别为0.04～0.16μg/kg和0.12～0.55μg/kg。在5、20、50μg/kg加标水平下的平均回收率为74.0%～121%,相对标准偏差(RSD)为0.20%～23%。该方法操作简单、快速、重现性好,适用于水产品中TBBPA和HBCD的快速检测。     

A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

微量元素La对Al—Si合金凝固过程的影响

本文用差热分析法系统地研究了La掺杂对Al-Si共晶合金、亚共晶、超共晶的动态凝固过程的影响。结果表明,La促使α(Al)成核,使体系中初晶α(Al)的析出温度比AJ-Si二元合金中Al初晶的实际析出温度明显提高;La对初晶Si的成核和长大起抑制作用,使超共晶中初晶Si相析出温度较二元合金中的Si初晶的实际析出温度明显降低。     

两种气相色谱固定相的研究

使用硫杂冠醚、穴醚[2.2.2]作气相色谱固定相制备毛细管柱,考察两种固定相的使用比例、极性、热稳定性,并对甲苯-苯、乙苯-甲苯、甲基苯酚（o/p）、二氯苯（o/p,m）、硝基氯化苯（m,o）、苯-环己烷、庚醇-辛醇、苯胺-N,N二甲基苯胺等混合样品进行色谱分离.实验结果表明：两种固定相在OV-1701中的比例均为15%时有较好的分离效果,都属于中等极性的固定相.硫杂冠醚、穴醚[2.2.2]的平均极性分别为815、832,其中硫杂冠醚固定相的热稳定性较好,有较高的使用温度（185℃）,而穴醚[2.2.2]的最高使用温度为120℃,因此穴醚[2.2.2]的使用温度受到一定的限制.从它们较好的分离性能看,固定相硫杂冠醚、穴醚[2.2.2]均具有较好的应用前景.     

紫花冷蒿挥发油成分的研究

采用水蒸气蒸馏法提取,运用气相色谱-质谱联用法对香叶蒿挥发油化学成分进行了分析,用气相色谱面积归一化法测定了各成分的质量分数。结果鉴定出72个化合物,主要成分为樟脑(33.136%),桉树脑(23.419%),6-甲基-2-乙烯基-1,3-庚二烯醛(8.414%),孟烯醇(3.819%),桥环萜烯酮(3.276%),莰烯(2.454%),1R-α-蒎烯(1.917%),去甲基丁香酚(1.550%),α-松油醇(1.449%),冰片(1.674%),β-香叶烯(1.165%),百里香酚(0.329%)等。研究表明紫花冷蒿挥发油主要为单萜及其氧化衍生物。其挥发油成分的研究为挖掘其药用及食品香料工业的应用价值提供了科学依据。