Theoretical Studies on the Si（001）-SiO2 Interface Structure

1 INTRODUCTION Silicon and its alloy have been widely applied in such fields as electronic industry, high-temperature structural ceramics, etc. In addition, the researches on silicon and its relevant materials greatly promote the rapid development of modern optics and infor- mation technology. Therefore, more and more at- tention is focused on the structure of silicon, oxide of silicon and the interfaces between silicon and metal or nonmetal. As an ideal passive film on the Si surface, S…     

Hydrothermal Synthesis and Crystal Structure of a Novel Isophthalate-bridged Copper(II) Polymer with Two-dimensional Network Structure: [Cu_2(phen)(ipt)_2]_(2n)·nH_2O (ipt = isophthalate, phen = 1,10-phenanthroline)

1 INTRODUCTION donor due to the presence of the protonated carboxyl group; (d) it can form short bridges via one car- Coordination polymers are of great interest due to boxylato end or long bridges via the benzene ring[7]. their physical properties and potential applications in We believe that coordination functionality of isoph- functional materials[1~3]. Aromatic polycarboxylic acids thalate can lead to interesting structures. In this com- such as 1,2,4,5-benzenetetracarboxylic acid[4],…     

Synthesis and Crystal Structure of 1,4-Bis(2-hydroxymethylphenyl)-1,4-dioxabutane

1 INTRODUCTION Macrocyclic ligands and their metal complexes have received much attention due to their applications in ion transport, ion separation and as models in biomimic researches[1~7]. The synthetic methods of macrocyclic ligands and their metal complexes are mainly divided into three kinds[8]. The first one is synthesizing free ligand, then forming the metal complexes; the second is template synthesis; and the third is synthesizing the end-off or side-off precursor ligand, then c…     

Determination of six metals in galician red wines (in northwestern Spain) by capillary electrophoresis

A simple technique is described for the routine simultaneous capillary electrophoretic determination of 6 cations in wine. Separation was achieved on a fused silica capillary column with a UV-Cat-1, alpha-hydroxysobutyric acid and 18-crown-6-ether buffer at pH 4.5 and indirect UV detection at 214 nm. The content of magnesium, sodium, potassium, calcium, manganese, and lithium was determined. The method is quantitative, with recoveries in the 92-102% range, and linear over more than one order of magnitude. The precision is better than 2.5-3.4%. The method is sensible, with detection limits between 0.01 and 0.06 mg/L. Twenty-five red wines with a Certified Brand of Origin from Galicia (north-western Spain) were analyzed by the proposed method. Various wines showed very similar electrophoretic profiles, but significant quantitative differences were observed.     

The use of emulsions for the determination of methylmercury and inorganic mercury in fish-eggs oil by cold vapor generation in a flow injection system with atomic absorption spectrometric detection

An on-line time based injection system used in conjunction with cold vapor generation atomic absorption spectrometry and microwave-aided oxidation with potassium persulfate has been developed for the determination of the different mercury species in fish-eggs oil samples. A three-phase surfactant-oil-water emulsion produced an advantageous flow when a peristaltic pump was used to introduce the highly viscous sample into the system. The optimum proportion of the oil-water mixture ratio was 2:3 v/v with a Tween 20 surfactant concentration in the emulsion of 0.008% v/v. Inorganic mercury was determined after reduction with sodium borohydride while total mercury was determined after an oxidation step with persulfate prior to the reduction step to elemental mercury with the same reducing agent. The difference between total and inorganic mercury determined the organomercury content in samples. A linear calibration graph was obtained in the range 0.1-20 micrograms l-1 of Hg2+ by injecting 0.7 ml of samples. The detection limits based on 3 sigma of the blank signals were 0.11 and 0.12 microgram l-1 for total and inorganic mercury, respectively. The relative standard deviation of ten independent measurements were 2.8 and 2.2% for 10 micrograms l-1 and 8.8 and 9.0% for 0.1 microgram l-1 amounts of total and inorganic mercury, respectively. The recoveries of 0.3, 0.6 and 8 micrograms l-1 of inorganic and organic mercury added to fish-eggs oil samples ranged from 93.0 to 94.8% and from 100 to 106%, respectively. Good agreement with those values obtained for total mercury content in real samples by electrothermal atomic absorption spectrometry was also obtained, differences between mean values were < 7%. With the proposed procedure, 22 proteropterous catfish-eggs oil samples from the northwestern coast of Venezuela were measured; while the organic mercury lay in the range 2.0 and 3.3 micrograms l-1, inorganic mercury was not detected.     

微量元素与中医辩证分型

通过对两间小学639名学生进行微量元素检测及体格检查，并进行中医辩证分型，发现广州市部份小学生体内微量元素缺乏较严重，占体检总人数的62．3％，同时也存在营养不良，贫血、佝偻病，急慢性上呼吸道炎等、按中医辩证分型有肝热、脾气虚弱、肝血不足、肾气虚等，本文试从微量元素缺乏与中医辩证中找出两者之间的联系，以便于指导治疗，提高小学生的健康水平，增强体质和智力。     

Single-step preparation and catalytic activity of mesoporous MCM-41 and SBA-15 silicas functionalized with perfluoroalkylsulfonic acid groups analogous to Nafion

Preparation of hybrid organic-inorganic MCM-41 and SBA-15 silicas functionalized with perfluoroalkylsulfonic acid groups has been achieved in a single step by reacting the mesoporous silicas with 1,2,2-trifluoro-2-hydroxy-1-trifluoromethylethane sulfonic acid beta-sultone; the catalysts showed higher activity than commercial Nafion-silica composite for the esterification of long chain fatty acids with ethanol.     

Capillary zone electrophoretic separation and determination of imidazolic antifungal drugs

Capillary zone electrophoresis (CZE) was adapted to the simultaneous determination of a mixture of three imidazolic antifungal drugs. Separation was achieved by using a fused-silica capillary column with an acetic acid-Tris buffer at pH 5.18 and UV detection at 196 nm. Several electrophoretic parameters were investigated: pH and buffer concentration, applied voltage, temperature and injection conditions. The optimized CZE method was applied to the individual determination of ketoconazole, clotrimazole and econazole in pharmaceutical forms, after a previous single extraction step in methanol, with recoveries of 98.00, 99.96 and 99.58% respectively. The antifungal drugs can be determined at a concentration level lower than 1.0 x 10(-7) M.