排序方式: 共有61条查询结果,搜索用时 31 毫秒
1.
High-power and high-efficiency operation of an all-solid-state, quasi-continuous-wave, titanium sapphire laser system 总被引:1,自引:0,他引:1
High-power and high-efficiency operation of an all-solid-state, quasi-continuous-wave, titanium sapphire laser is obtained with a diode-laser-pumped frequency-doubled Nd:YAG laser as the pump source. A maximum output power of 2.5 W is obtained for 16-W power of 532-nm pump light. A much higher conversion efficiency of 15.7% is obtained when at the maximum output power. 相似文献
2.
3.
4.
Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3 下载免费PDF全文
We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485-1553nm signal wave and 3383-3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal. 相似文献
5.
Performance of gain-switched all-solid-state quasi-continuous-wave tunable Ti:sapphire laser system 下载免费PDF全文
We have made a gain-switched all-solid-state quasi-continuous-wave (QCW) tunable Ti:sapphire laser system, which is pumped by a 532 nm intracavity frequency-doubled Nd:YAG laser. Based on the theory of gain-switching and the study on the influencing factors of the output pulse width, an effective method for obtaining high power and narrow pulse width output is proposed. Through deliberately designing the pump source and the resonator of the Ti:sapphire laser, when the repetition rate is 6 kHz and the length of the cavity is 220 mm, at an incident pump power of 22 W, the tunable Ti:sapphire laser from 700 to 950nm can be achieved. It has a maximum average output power of 5.6W at 800nm and the pulse width of 13.2 ns, giving an optical conversion efficiency of 25.5% from the 532 mn pump laser to the Ti:sapphire laser. 相似文献
6.
An All-Solid-State Tunable Dual-Wavelength Ti:Sapphire Laser with Quasi-Continuous-Wave Outputs 下载免费PDF全文
A high power dual-wavelength Ti:sapphire laser system with wide turning range and high efficiency is described, which consists of two prism-dispersed resonators pumped by an a11-solid-state frequency-doubled Nd:YAG laser. Tunable dual-wavelength outputs, with one wavelength range from 750nm to 795nm and the other from 80Ohm to 850nm, have been demonstrated. With a pump power of 23 W at 532nm, a repetition rate of 6.5kHz and a pulse width of 67.6ns, the maximum dual-wavelength output power of 5.6 W at 785.3nm and 812.1 run, with a pulse width of 17.2ns and a line width of 2nm, has been achieved, leading to an optical-to-optical conversion efficiency of 24.4%. 相似文献
7.
This paper reports a high power, all-solid-state, quasi-continuous-wave tunable Ti:sapphire laser system pumped by laser diode (LD) pumped frequency-doubled Nd:YAG laser. The maximum tuned output power of 4.2 W (797 nm) and tuned average power of 3.7 W were achieved when fixing the Ti:sapphire broadband output power at 5.0 W and applying 750-850 nm broadband coated mirror. 相似文献
8.
利用长度为20mm的周期极化化学计量比掺氧化镁钽酸锂晶体(PP-MgO: SLT),实现了转换效率为11.8%的单程连续外腔准相位匹配(QPM)倍频,此时1064nm基频光的输入功率为7.69W,获得的532nm倍频光的输出功率为905mW。实验中可以发现,在不同的基频光聚焦条件和输入功率下,对应最大倍频输出的晶体温控炉的设定温度也要随之改变。此外,对允许角和允许温度也进行了研究,实验结果和理论结果符合的很好。 相似文献
9.
10.
All-Solid-State Nd:YAG Laser Operating at 1064nm and 1319nm under 885nm Thermally Boosted Pumping 下载免费PDF全文
We report a high-effciency Nd:YAG laser operating at 1064 nm and 1319nm, respectively, thermally boosted pumped by an all-solid-state Q-switched Ti:sapphire laser at 885 nm. The maximum outputs of 825.4 m W and 459.4mW, at 1064nm and 1319nm respectively, are obtained in a 8-ram-thick 1.1 at.% Nd:YAG crystal with 2.1 W of incident pump power at 885nm, leading to a high slope efficiency with respect to the absorbed pump power of 68.5% and 42.0%. Comparative results obtained by the traditional pumping at 808nm are presented, showing that the slope efficiency and the threshold with respect to the absorbed pump power at 1064nm under the 885nm pumping are 12.2% higher and 7.3% lower than those of 808rim pumping. At 1319nm, the slope efficiency and the threshold with respect to the absorbed pump power under 885nm pumping are 9.9% higher and 3.5% lower than those of 808 nm pumping. The heat generation operating at 1064 nm and 1319 nm is reduced by 19.8% and 11.1%, respectively. 相似文献