Meet-Cloud for Secure and Accurate Distribution of Negative Messages in Vehicular Ad hoc Network

Keeping Vehicular Ad hoc Network(VANET) from attacks requires secure and efficient distribution of information about bad entities. Negative messages are pieces of information that define the negative attributes of vehicles. By formally defining the negative message, we observe that accuracy is essential for its efficient distribution. We formally define the coverage percentage and accurate coverage percentage to describe the availability and distribution efficiency of negative message. These two metrics can jointly evaluate the performance of a distribution method. To obtain both high coverage percentage and high accurate coverage percentage, we propose meet-cloud, a scheme based on meet-table and cloud computing to securely and accurately distribute negative messages in VANET. A meet-table in a Road Side Unit(RSU) records the vehicles it encounters. All meettables are sent to cloud service to aggregate a global meet-table. The algorithm for distributing and redistributing negative messages are designed. Security analysis shows that meet-cloud is secure against fake and holding on to negative message attacks. Simulations and analysis demonstrate that meet-cloud is secure under denial of service and fake meet-table attacks. The simulation results also justify that meet-cloud outperforms the RSU broadcast and epidemic model.     

汽车太阳膜综合隔热性能测试系统研究

设计了一种新的汽车太阳膜综合隔热性能测试系统,通过试验,客观地比较了汽车太阳膜的真实综合隔热性能,为鉴定相近理论参数汽车太阳膜的隔热性能提供了技术支持。     

纳米累托石-TiO2光催化剂的制备及表征

以TiCl4和累托石为主要原料，制备出纳米累托石-TiO2粉末，并用X-衍射、透射电镜等对其进行表征．结果表明：纳米累托石-TiO2粉末平均直径为17．5nm当焙烧温度从500℃升至800℃时，累托石-TiO2粉末的比表面积从65．7m^2／g下降至3．3m^2／g，单位质量吸附剂的孔体积从0．1430cm。／u降到0．0213cm^3／g；当焙烧温度从300℃上升至500℃时，孔径变化不大，属中孔范围；当焙烧温度升至800℃时，一些孔道出现坍塌，不利于纳米累托石-TiO2粉末的光催化活性．     

A synthetic strategy for the preparation of cyclic peptide mimetics based on SET-promoted photocyclization processes

A novel method for the synthesis of cyclic peptide analogues has been developed. The general approach relies on the use of SET-promoted photocyclization reactions of peptides that contain N-terminal phthalimides as light absorbing electron acceptor moieties and C-terminal alpha-amidosilane or alpha-amidocarboxylate centers. Prototypical substrates are prepared by coupling preformed peptides with the acid chloride of N-phthalimidoglycine. Irradiation of these substrates results in the generation of cyclic peptide analogues in modest to good yields. The chemical efficiencies of these processes are not significantly affected by (1) the lengths of the peptide chains separating the phthalimide and alpha-amidosilane or alpha-amidocarboxylate centers and (2) the nature of the penultimate cation radical alpha-heterolytic fragmentation process (i.e., desilylation vs decarboxylation). An evaluation of the effects of N-alkyl substitution on the amide residues in the peptide chain showed that N-alkyl substitution does not have a major impact on the efficiencies of the photocyclization reactions but that it profoundly increases the stability of the cyclic peptide.     

Gd complexes of diethylenetriaminepentaacetic acid conjugates of low-molecular-weight chitosan oligosaccharide as a new liver-specific MRI contrast agent

This study was to describe the synthesis of complexes of gadolinium diethylenetriaminepentaacetic acid conjugates of low-molecular-weight chitosan oligosaccharide Gd-DTPA-CSn (n = 6, 8, 11) as a new class of contrast agent as well as its magnetic property in a pilot magnetic resonance imaging. The efficacy of the contrast agent was assessed by measuring the longitudinal relaxivity (r₁), FLASH imaging in phantoms in vitro and signal intensity in vivo of the rat abdominal axial imaging. The r₁ of Gd-DTPA-CS₁₁ was up to 11.65 mM^− 1·s^− 1, which was 3 times higher than that of the analogous MRI contrast agent Gd-DTPA in commercial use. In vivo MR images of rat obtained with Gd-DTPA-CS₁₁ showed strong signal enhancement in liver and the vessels of the liver parenchyma during the extended period of time. The present study suggests that the new synthesized gadolinium complexes can be used as a new class of practical liver-specific MRI contrast agent because of its superior performance compared with Gd-DTPA.     

机械球磨制备三苯胺基PAF-106s及C2烃吸附性质

以三苯胺为单体, 无水三氯化铁为催化剂, 二甲醇缩甲醛为外交联剂, 通过机械球磨不同比例的三苯胺、 三氯化铁和二甲醇缩甲醛, 合成了PAF-106s(PAF-106a~PAF-106c, PAF: porous aromatic framework). 红外光谱、 元素分析、 X射线光电子能谱和固体核磁共振波谱等表征结果证明发生了聚合反应. 氮气吸附结果表明, 三苯胺、 三氯化铁和二甲醇缩甲醛的比例影响PAF-106s的多孔性能. 三氯化铁和三苯胺摩尔比从3∶1增加到12∶1时, PAF-106c的BET比表面积从PAF-106a的135 m²/g增加到280 m²/g. 引入二甲醇缩甲醛后, PAF- 106d~PAF-106g的BET比表面积随三氯化铁和二甲醇缩甲醛摩尔比的增加而逐渐降低. 在273和298 K下, 测试了PAF-106c的C2烃吸附性能, 并采用理想吸附溶液理论计算了C₂H₂/C₂H₄和C₂H₆/C₂H₄分离比.     

Robust nickel silicate catalysts with high Ni loading for CO2 methanation

CO₂ is the main component of greenhouse gases and also an important carbon source. The hydrogenation of CO₂ to methane using Ni-based catalysts can not only alleviate CO₂ emissions but also obtain useful fuels. However, Ni-based catalysts face one major problem of the sintering of Ni nanoparticles in the process of CO₂ methanation. Thus, this work has synthesized a series of efficient and robust nickel silicate catalysts (NiPS−X) with different nickel content derived from nickel phyllosilicate by the hydrothermal method. It was found that the Ni loading plays a critical role in the structure and catalytic performance of the NiPS−X catalysts. The catalytic performance gradually increases with the increase of Ni loading. In particular, the highly dispersed NiPS-1.6 catalyst with a high Ni loading of 34.3 wt% could obtain the CO₂ conversion greater than 80%, and the methane selectivity was close to 100% for 48 h at 330 °C and the GHSV of 40,000 mL g⁻¹ h⁻¹. The excellent catalytic property can be assigned to the high dispersion of Ni nanoparticles and the strong interaction between the active component and the carrier, which is derived from a unique layered silicate structure with lots of nickel phyllosilicate and a large number of Lewis acid sites.     

Membrane lipids are both the substrates and a mechanistically responsive environment of TMEM16 scramblase proteins

Recent discoveries about functional mechanisms of proteins in the TMEM16 family of phospholipid scramblases have illuminated the dual role of the membrane as both the substrate and a mechanistically responsive environment in the wide range of physiological processes and genetic disorders in which they are implicated. This is highlighted in the review of recent findings from our collaborative investigations of molecular mechanisms of TMEM16 scramblases that emerged from iterative functional, structural, and computational experimentation. In the context of this review, we present new MD simulations and trajectory analyses motivated by the fact that new structural information about the TMEM16 scramblases is emerging from cryo-EM determinations in lipid nanodiscs. Because the functional environment of these proteins in in vivo and in in vitro is closer to flat membranes, we studied comparatively the responses of the membrane to the TMEM16 proteins in flat membranes and nanodiscs. We find that bilayer shapes in the nanodiscs are very different from those observed in the flat membrane systems, but the function-related slanting of the membrane observed at the nhTMEM16 boundary with the protein is similar in the nanodiscs and in the flat bilayers. This changes, however, in the bilayer composed of longer-tail lipids, which is thicker near the phospholipid translocation pathway, which may reflect an enhanced tendency of the long tails to penetrate the pathway and create, as shown previously, a nonconductive environment. These findings support the correspondence between the mechanistic involvement of the lipid environment in the flat membranes, and the nanodiscs. © 2019 Wiley Periodicals, Inc.     

选矿产品矿物自动分析的光片制备

基于扫描电子显微镜的矿物自动分析仪(Quantitative Evaluation of Minerals by Scanning Electronic Microscopy)、MLA(Mineral Liberation Analyser)和AMICS(Advanced Mineral Identification and Characterization System)可用于测定选矿产品中目的矿物的粒度和单体解离度,为确定合理的磨矿细度以及优化选矿工艺流程提供依据。环氧树脂光片的制备是矿物自动识别和测量的最关键的一环,其代表性直接关系到后续数据测量的准确性和真实性。对于金属矿产品来说,由于选矿产品中矿物颗粒粗细不均、密度差异较大,在环氧树脂胶结固化过程中矿物颗粒会产生明显的分异作用并互相黏连,造成分析结果失真。实验证明,把样品与晶质石墨混均,然后加入环氧树脂以及固化剂搅拌混合倒入圆柱状模具进行冷镶嵌,待样品固化后再沿圆柱体的纵向进行切割,并对其切割面进行粗磨、细磨、精磨以及抛光,就可以制备出样品分散性好、分布均匀、表面光滑平整的具有代表性的环氧树脂光片。