小毛足鼠(Phodopus roborovskii)食性和食量的研究

小毛足鼠饲喂试验结果以及颊囊食物统计结果表明,该鼠在饲喂条件下食物资源利用谱相对较宽,但在野外条件下食物资源的利用主要以植物种子为主;并结合具体情况探讨了造成野外条件下该鼠食物资源利用范围趋于特化的原因．估算了小毛足鼠的采食效率为０．０７６％～０．１４％．在以上研究基础上,对小毛足鼠的危害与防治问题作了初步分析与说明     

An efficient method for the synthesis of hydrocyclopenta[1,2-b]furan with various side chains at 3a-position

(3aS∗,1aR∗)-1a-Methoxy-3a-methoxycarbonyl-2,3,4,5,6,3a-hexahydrocyclopenta[1,2-b]furan was prepared in 96% overall yield from 2-methoxycarbonylated cyclopenta-1-one in two steps. This furan derivative is used as a divergent intermediate in the synthesis of our originally designed chiral resolving agents having various substitutions. During the preliminary evaluation of divergent synthetic products, it was discovered that 3a-(fluoren-9-ylidenemethyl)-2,3,4,5,3a-pentahydrocyclopenta[1,2-b]furan, was a remarkably improved chiral resolving agent for secondary alcohols.     

α─萘乙酸甲酯的合成研究

本文报导了用固体超强酸Ｔｉｏ２／ＳＯ２－４催化合成。α－萘乙酸甲酯的方法，并讨论了催化剂的用量、反应物的摩尔比、反应温度等对反应产率的影响。     

Pharmacokinetic comparison of five tanshinones in normal and arthritic rats after oral administration of Huo Luo Xiao Ling Dan or its single herb extract by UPLC‐MS/MS

A fast, sensitive and reliable ultra performance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) method has been developed and validated for simultaneous quantitation and pharmacokinetic study of five tanshinones (tanshinone I, tanshinone IIA, tanshinone IIB, dihydrotanshinone I, cryptotanshinone), the bio‐active ingredients of Huo Luo Xiao Ling Dan (HLXLD) in rat plasma. After liquid–liquid extraction, chromatographic separation was accomplished on a Shim‐pack XR‐ODS column (75 × 3.0 mm, 2.2 µm particles) and eluted with a mobile phase consisting of acetonitrile–0.05% formic acid aqueous solution (80:20, v/v) at a flow rate of 0.4 mL/min, and the total run time was 7.0 min. The detection was performed on a triple quadrupole tandem mass spectrometry equipped with an electrospray ionization source in positive ionization and multiple reaction monitoring mode. The lower limits of quantification were 0.050–0.400 ng/mL for all the analytes. Linearity, precision and accuracy, the mean extraction recoveries and matrix effects all satisfied criteria for acceptance. This validated method was successfully applied to a comparative pharmacokinetic study of five bio‐active components in rat plasma after oral administration of HLXLD or Salvia miltiorrhiza extract in normal and arthritic rats. The results showed that there were different pharmacokinetic characteristics among different groups. Copyright © 2016 John Wiley & Sons, Ltd.     

Facile Surfactant-, Reductant-, and Ag Salt-free Growth of Ag Nanoparticles with Controllable Size from 35 to 660 nm on Bulk Ag Materials

Morphologically and dimensionally controlled growth of Ag nanocrystals has long been plagued by surfactants or capping agents that complicate downstream applications, unstable Ag salts that impaired the reproducibility, and multistep seed injection that is troublesome and time-consuming. Here, we report a one-pot electro-chemical method to fast (∼2 min) produce Ag nanoparticles from commercial bulk Ag materials in a nitric acid solution, eliminating any need for surfactants or capping agents. Their size can be easily manipulated in an unprecedentedly wide range from 35 to 660 nm. Furthermore, the Ag nanoparticles are directly grown on the Ag substrate, highly desirable for promising applications such as catalysis and plasmonics. The mechanistic studies reveal that the concentration of Ag⁺ in the diffusion layer nearby the surface, controlled by the magnitude and duration of voltage, is critical in governing the nanoparticle formation (<1.3 mM) and its dimensional adjustability.     

Thermal and Nonthermal Effects in Plasmon-Mediated Electrochemistry at Nanostructured Ag Electrodes

Hot carriers (HCs) and thermal effects, stemming from plasmon decays, are crucial for most plasmonic applications. However, quantifying these two effects remains extremely challenging due to the experimental difficulty in accurately measuring the temperature at reaction sites. Herein, we provide a novel strategy to disentangle HCs from photothermal effects based on the different traits of heat dissipation (long range) and HCs transport (short range), and quantitatively uncover the dominant and potential-dependent role of photothermal effect by investigating the rapid- and slow-response currents in plasmon-mediated electrochemistry at nanostructured Ag electrode. Furthermore, the plasmoelectric surface potential is found to contribute to the rapid-response currents, which is absent in the previous studies.     

载脂蛋白E与阿尔兹海默病的相关研究进展*

载脂蛋白E（Apolipoprotein E,ApoE ）的等位基因ε4是阿尔兹海默病（Alzheimer’s disease,AD）主要的危险遗传因子，它主要与晚发型以及散发型阿尔兹海默病相关。阿尔兹海默病的两个主要病理学特征均被发现与ApoE 有着极为密切的关系。本文介绍了ApoE在阿尔兹海默病中所起的主要作用的研究进展以及目前国内外关于基于ApoE的阿尔兹海默病相关药物研究。     

低温固相反应法制备钠快离子导体NaZr2(PO4)3粉体

为了进一步促进钠快离子导体磷酸锆钠(NaZr2(PO4)3)粉体的实际应用,本文提出了一种以氧氯化锆(ZrOCl2·8H2O)和二水磷酸二氢钠(NaH2PO4·2H2O)为原料的低温固相反应法制备NaZr2(PO4)3粉体.通过XRD,SEM和Raman等测试手段系统研究了磷酸盐用量对制备磷酸锆钠粉体的影响.结果 表明:采用超量的磷酸盐有利于纯相磷酸锆钠粉体的合成.同时当锆盐与磷酸盐的摩尔比为2∶5.4时,能够合成平均粒径1μm,尺寸均匀,分散性良好的磷酸锆钠粉体.研究发现研磨时发生的固相反应对磷酸锆钠粉体的制备有重要作用,一方面促进了无定型磷酸锆钠的产生,有利于磷酸锆钠晶体形成;另一方面原位生成的氯化钠为晶体的生长提供了良好的液相环境,促进了磷酸锆钠粉体的低温合成.该工作为磷酸锆钠粉体的大规模生产提供了一条简单有效的方法.     

Direct manufacturing of Cu-based alloy parts by selective laser melting

The frequent defects of the metal parts, such as non-fully melting, thermal strain, and balling, which are produced by selective laser melting (SLM) that is a novel method of one-step manufacturing, are analyzed theoretically and experimentally. The processing parameters significantly affect the quality of the final parts, and simultaneously, the appropriate laser mode and the special scanning strategy assure a satisfying quality of the final parts. The SLM experiment is carried out using Cu-based powder. The metal part is divided into several scanned regions, each of which is scanned twice at the cross direction with different scanning speeds. The microstructure is analyzed on microscope. The results show that the part is metallurgically bonded entity with a relative density of 95%, and the microstructure is composed of equiaxial crystal and dendritic crystal whose distributions are mainly decided by the scanning strategy.