Trace metal speciation measurements in waters by the liquid binding phase DGT device

The speciation measurements of trace metals by the diffusive gradients in thin-films technique (DGT) using a poly(4-styrenesulfonate) (PSS) aqueous solution as a binding phase and a cellulose dialysis membrane (CDM) as a diffusive layer, CDM-PSS DGT, were investigated and showed good agreement with computer modelling calculations. The diffusion coefficients of ethylenediaminetetraacetic acid (EDTA) complexes with Cd²⁺ and Cu²⁺ were measured and compared with those of the inorganic metal ions. CDM-PSS DGT device was tested for speciation measurement in sample solutions containing EDTA, tannic acid (TA), glucose (GL), dodecylbenzenesulfonic acid (DBS) and humic acid (HA) as complexing ligands forming organic complexes with varying stability constants. Lower percentages of DGT labile copper concentrations over total filterable copper concentrations obtained from the deployments in freshwater sites indicated that copper complexes with organic matter were basically not measured by the devices.     

基于土性相关蒙特卡罗法的争岗滑坡堆积体可靠性分析

针对澜沧江古水水电站争岗滑坡堆积体工程地质务件,在室内剪切试验、工程类比、参数反演基础上综合确定了岩土体力学参数及其统计分布规律.采用基于黏聚力c与内摩擦角φ相关抽样下的蒙特卡罗法对堆积体典型剖面进行了多种工况下的可靠性分析,预测了其未来的变形失稳特征.研究结果表明:当前堆积体B-B'剖面在正常运行工况下的破坏概率为2...     

Post-polymerization modification of aromatic polyimides via Diels-Alder cycloaddition

We report a facile post-polymerization modification route to functionalized aromatic polyimides via Diels-Alder cycloaddition. Aromatic polyimides are important, versatile high-performance polymers; however, their structural diversity is restricted by the requirements of the step-growth polymerization. We prepared polyimides with alkynes in their main-chain as macromolecular dienophiles and quantitatively grafted tetraphenylcyclopentadienone based dienes. The resulting solution-processable, wholly aromatic polyimides show a considerable increase in surface area due to the induced conformational changes and bulky, rigid, and contorted molecular structures. The orthogonality of the reaction is exploited to insert functional groups, namely bromine and sulfonates, along the polymer backbone. In a further extension, the phenylene segments undergo cyclodehydrogenation to form nanographene segments within the polymer chains. The Diels-Alder cycloaddition onto polyimides is therefore demonstrated to be an effective, widely applicable route to tunable high-performance polymers with value-added functionality and thus considerable potential in a wide range of advanced materials.     

核能谱与两类转动惯量的精确表达式

用最小二乘拟合法,将稀土区的能谱实验数据,拟合不同的能谱公式,从而证明E=a〔(1+bI(I+1))~(1/2)-1〕是符合得较好的,本文还推导了与上述能谱相应的两类转动惯量,并以此与实验计算值进行比较,结果仍很满意.     

Accelerated carbonation and leaching behavior of the slag from iron and steel making industry

Ground granulated blast furnace slag(GGBFS)and steelmaking slag have been used as a raw material for cement production or as an aggregate to make concrete,which contribute aluminum,calcium,iron,and silicon oxides.The suitability of the slag for a particular application depends on its reactivity,cost,availability,and its influence on the properties of the resulting concrete.For the interest of durability studying of concrete in the presence of slag,the accelerated carbonation products and leaching behavior of the slag and Portland cement(PC)were studied.The experimental results confirmed that the slag was more resistant to carbonation compared to PC.The carbonation degree of GGBFS reduced by 17.74%;and the carbonation degrees of steelmaking slags reduced by 9.51%-11.94%.Carbonation neutralized the alkaline nature of the hydrated pastes and gave rise to the redox potential of the leachate slightly(30-77 mV).The carbonation also increased the release of most of the elements presented,except for calcium,to the aqueous environment.It is concluded that blend cements(PC plus slag)have economical advantages and better durability compared to PC.     

EPR Studies of Tl0.5Pb0.5Sr1.6Ba0.4CaCu2?xRuxO7?δ Superconductor

Bulk superconducting samples of type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ, (Tl, Pb)/Sr-1212, with 0.0 ≤ x ≤ 0.525 were prepared by the conventional one-step solid-state reaction technique. The prepared samples were investigated using X-ray powder diffraction, electrical resistivity and electron paramagnetic resonance (EPR) measurements. Enhancement of the phase formation, superconducting transition temperature T _c and hole carriers concentration P was observed up to x = 0.075. For x > 0.075, a reverse trend was observed. EPR spectra were measured at different temperatures (120–290 K) for all prepared samples. The number of spins N participating in the resonance and the paramagnetic susceptibility χ were calculated as a function of both Ru-content and temperature. N and χ increased as the Ru-content increased. A linear relationship between logN and 1/T was established, from which the activation energy E _a was calculated as a function of the Ru-content. The temperature dependence of χ was fitted according to Curie–Weiss type of magnetic behavior. Curie constant C, Curie temperature θ, the effective magnetic moment μ and the electronic specific heat γ were estimated as a function of the Ru-content.     

A sensitive, rapid ferricyanide-mediated toxicity bioassay developed using Escherichia coli

A need for rapid toxicity techniques has seen recent research into developing new microbiological assays and characterising their toxicity responses using a range of substances. A microbiological bioassay that determines changes in ferricyanide-mediated respiration for toxicity measurement (FM-TOX) shows particular promise. The development and optimisation of an improved FM-TOX method, incorporating novel features, is described using Escherichia coli as the biocatalyst. Omission of an exogenous carbon source, used in previously described FM-TOX assays, substantially improves the assay sensitivity. In addition, the development of a two-step procedure (toxicant exposure followed by determination of microbial respiratory activity) was found to enhance the inhibition of E. coli by 3,5-dichlorophenol and four other toxicants, compared to single-step procedures. Other assay parameters, such as the ferricyanide concentration, exposure times and optical density of the biocatalyst were also optimised, sometimes based on practical aspects. Toxicity tests were carried out using the adopted technique on both organic and inorganic toxicants, with classic sigmoid-shaped dose-response curves observed, as well as some non-standard responses. IC₅₀ data is presented for a number of common toxicants. The optimised assay provides a good foundation for further toxicity testing using E. coli, as well as the potential for expanding the technique to utilise other bacteria with complementary toxicity responses, thereby allowing use of the assay in a range of applications.     

Effect of IR laser radiation on the structure and optical properties of PC-PBT/Pd polymer nanocomposite films

ABSTRACT

Bayfol (PC-PBT blend ?lm) is a class of polymeric solid-state nuclear track detector which has a lot of applications in several radiation detection ?elds. It is a bisphenol-A polycarbonate PC blended with polybutylene terephthalate PBT. Bayfol/Palladium (PC-PBT/Pd) nanocomposite films have been deposited using the molding technique. It is worth mentioning that this report is almost the first one dealing with the topic of the changes of physical properties of Bayfol/Pd nanocomposite due to laser exposure. Samples from PC-PBT/Pd (5?wt%) nanocomposite were exposed to IR-pulsed laser of 5-W power, capable of producing 2000 pulses per second with pulse duration of 200?ns at 904?nm. The laser fluences were in the range 2–25?J/cm². The resultant modi?cations in the exposed nanocomposite samples have been studied as a function of fluence using different characterization techniques such as X-ray diffraction (XRD), UV spectroscopy and color difference studies. The results indicate the proper dispersion of Pd nanoparticles in the PC-PBT matrix that causes a strong intermolecular interaction between Pd and PC-PBT, resulted in an increase in refractive index and the amorphous phase. Also, it is found that the laser exposure reduces the optical energy gap that could be attributed to the increase in structural disorder of the exposed PC-PBT/Pd nanocomposites due to crosslinking. Further, the color intensity ΔE, which is the color difference between the exposed samples and the non-exposed one, was increased with increasing the laser fluence, convoyed by a significant increase in the green and yellow color components.