均匀设计─灰色联合预测及其应用─邮发期刊价格预测

本文利用均匀设计优化参数估计，建立了较精确的图书馆工作的灰色模型；并预测了今后数年的期刊价格发展趋势。     

Solution bundle for a class of impulsive differential inclusions on Banach spaces

In this paper a class of impulsive differential inclusions is investigated. The existence of solution bundle is proved. And we also construct a nonlinear semigroup of operators on cb(E) (closed-bounded subset of E) to describe the set of attainable states.     

Large-scale magnetic structures of coronal mass ejections

Based on the studies on the source regions of a group of coronal mass ejections, we have identified two types of large-scale magnetic structures, and suggested that they are intrinsic components of solar magnetism, their destabilization, expansion, and eruption into the interplanetary space are the basic physical processes which lead to the coronal mass ejections. These two types of large-scale structures are giant magnetic loops connecting the two active belts on the opposite hemispheres of the Sun, and the giant filaments (filament channels) and their related magnetic structures. The latter often appear as two parallel rows of sunspots and plage fields, which align side by side in the full disk daily and synoptic magnetograms. The magnetic neutral lines of these large-scale structures are usually longer than 50 heliographic degrees. We name this type of structure “super A configuration”. Sometimes, they are shown as very long filaments and related large-scale magnetic fields. As these magnetic structures are of very large scale, they extend to a great altitude into the corona, they are not easily recognized in magnetic field observations which are usually aimed at solar flare studies. To identify these large-scale structures becomes a key to understanding and predicting coronal mass ejections.     

激光参数对甲醇激光表面反应性能的影响规律

以Ｓｉｏ２和ＰＭｏ１２为表面材料，用可选频脉冲ＴＥＡ－ＣＯ２激光器作光源，考察了激发频率、激光强度、脉冲次数和脉冲间隔等激光参数对甲醇激光分解反应性能的影响规律。结果表明：甲醇的激光表面反应具有频率选择性，激发频率不同，甲醇分解率也不同；不同表面上激发次数影响规律不同，随着激发次数增加，甲醇转化率增加；脉冲间隔的改变只影响转化率，脉冲间隔越小，能量利用率越高，甲醇分解率越高；激光强度的提高可增加甲     

掺杂8-羟基喹啉铝薄膜的电致发光特性研究

在具有电致发光(EL)的有机整合染料8-羟基喹啉铝(Alq3)中接以染料罗丹明6G(R6G),用真空热蒸发的方法制备器件,获得了峰值波长575nm的黄色直流薄膜电致发光,从而通过掺杂改变了发光颜色.并在Alq3发光层不同区域插入一掺杂薄层(Alq3:R6G),利用其发光波长与未掺杂部分(Alq3)的不同,以此作为“探测层”,通过对器件光谱及电学特性的测量与分析,探讨了有关发光区域,发光机理,界面对发光影响等基本问题.     

Study of rapid transient explosive boiling under short-pulsed laser heating

Using acetone, ethanol, water and acetone-water mixture as test liquids, the rapid transient explosive boiling (RTEB) taking place under short-pulsed laser heating is observed in experiment. The behaviors of temperature variation are investigated via transient temperature measurement. The vapor bubble behaviors of RTEB are captured by high-speed photography, and the difference between RTEB and normal boiling is analyzed. The boiling heat transfer of RTEB is also discussed. It shows that the character of RTEB is far different from normal boiling.     

用于AIS实时信号稀疏表示的追踪算法研究

为解决非周期船舶自动识别系统(AIS)信号的载波跟踪问题,利用信号稀疏表示方法对AIS实时信号进行重构,以获得AIS信号的信道信息,从而为实现定位信息的测量打下基础.从AIS信号特点和AIS实时信号处理的要求出发,对基于K-SVD算法所构造的自适应冗余字典,从信号处理时间、稀疏表示精度、误码率和受噪声的影响几方面对比了基追踪(BP)和正交匹配追踪(OMP)两种不同的追踪算法.实验结果表明,两种算法都能有效精确地重构AIS信号,BP算法相比OMP算法具有更好的稀疏表示精度和误码率,但是信号处理时间会更长.由于AIS对实时性的高要求,OMP算法更适合用于AIS自主定位系统.     

Ce∶KNSBN晶体中光扇效应的响应时间特性研究

以单束光入射Ce∶KNSBN晶体,系统研究了不同入射光波长下,Ce∶KNSBN晶体中光扇效应的响应时间随入射光强度及光入射角的变化情况.结果显示,相同的入射光强度及光入射角下,入射光波长较短时,光扇效应到达稳态的时间较短.相同的入射光强度下,随光入射角的增大,响应时间先减小后增大,但不同波长入射光下,最小值对应的光入射角不同,入射光波长为532 nm时,响应时间最小值对应的θ为15°;入射光波长为632.8 nm时,对应的θ为15.5°.同时研究发现,入射光强度逐渐增大的过程中,响应时间在逐渐减小.     

利用聚合诱导胶体凝聚法制备中孔钛胶的研究

以钛酸丁酯为原料,利用聚合诱导胶体凝聚法(polymerization-induced colloid aggregation, PICA)合成了可供高效液相色谱(HPLC)使用的窄孔径和粒径分布的微米级中孔钛球.探索了以钛酸丁酯为原料制备胶体的方法和条件,考察了温度、溶液pH值、尿素和甲醛浓度对树脂微球成球的影响.同时对树脂微球的煅烧条件进行了考察.最终制备出适用于HPLC的平均粒径为3.5μm,平均孔径为18.9 nm,比表面积为9.6m2/g的二氧化钛填料.     

纳米级超精密气浮工件台振动特性分析

针对超精密气浮工件台的振动特性展开研究,提出了一种气固耦合的仿真处理方法.采用在气浮孔中施加对地弹簧的方法来模拟气浮系统,建立了工件台系统的动力学模型,推导出了系统的振动方程,对振动特性进行了求解和分析,得到了系统的固有频率和振型,对系统的结构刚度有了一个较为准确的估计.仿真结果表明振动对工件台定位精度影响很小,但会给测量造成一些误差.由仿真辨识出了气浮引起的振动频率范围,为系统的进一步优化提供了理论依据.通过试验证明了仿真模型的正确性和精确程度,并由试验结果证实了由气浮产生的振动远小于由系统结构引起的振动.