Hitherto-Unexplored Photodynamic Therapy of Ag2S and Enhanced Regulation Based on Polydopamine In Vitro and Vivo

Given their superior penetration depths, photosensitizers with longer absorption wavelengths present broader application prospects in photodynamic therapy (PDT). Herein, Ag₂S quantum dots were discovered, for the first time, to be capable of killing tumor cells through the photodynamic route by near-infrared light irradiation, which means relatively less excitation of the probe compared with traditional photosensitizers absorbing short wavelengths. On modification with polydopamine (PDA), PDA-Ag₂S was obtained, which showed outstanding capacity for inducing reactive oxygen species (increased by 1.69 times). With the addition of PDA, Ag₂S had more opportunities to react with surrounding O₂, which was demonstrated by typical triplet electron spin resonance (ESR) analysis. Furthermore, the PDT effects of Ag₂S and PDA-Ag₂S achieved at longer wavelengths were almost identical to the effects produced at 660 nm, which was proved by studies in vitro. PDA-Ag₂S showed distinctly better therapeutic effects than Ag₂S in experiments in vivo, which further validated the enhanced regulatory effect of PDA. Altogether, a new photosensitizer with longer absorption wavelength was developed by using the hitherto-unexplored photodynamic function of Ag₂S quantum dots, which extended and enhanced the regulatory effect originating from PDA.     

Direct visualization of the nanoscopic three‐phase structure and stiffness of NBR/PVC blends by AFM nanomechanical mapping

The PeakForce Quantitative Nanomechanical Mapping based on atomic force microscope (AFM) is employed to first visualize and then quantify the elastic properties of a model nitrile rubber/poly(vinyl chloride) (NBR/PVC) blend at the nanoscale. This method allows us to consistently observe the changes in mechanical properties of each phase in polymer blends. Beyond measuring and discriminating elastic modulus and adhesion forces of each phase, we tune the AFM tips and the peak force parameters in order to reliably image samples. In view of viscoelastic difference in each phase, a three‐phase coexistence of an unmixed NBR phase, the mixed phase, and PVC microcrystallites is directly visualized in NBR/PVC blends. The nanomechanical investigation is also capable of recognizing the crosslinked rubber phase in cured rubber. The contribution of the mixed phase was quantified and it was found that the mechanical properties of blends are mainly determined by the homogeneity and stiffness of the mixed phase. This study furthers our understanding the structure–mechanical property relationship of thermoplastic elastomers, which is important for their potential design and applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 662–669     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

Fe掺杂对BiTaO_4陶瓷样品介电和铁电特性的影响

为探究Fe掺杂对BiTaO4陶瓷样品介电特性和铁电特性的影响,采用传统固相烧结法制备了Bi Ta1-xFexO4-x(x=0,0.01,0.03)陶瓷样品,利用X线衍射仪和扫描电子显微镜对样品的晶体结构和表面形貌进行分析,利用精密阻抗分析仪和铁电分析仪对样品的介电性能和铁电性能进行检测.结果表明:Fe掺杂没有明显改变样品的晶体结构;随着Fe掺杂量的增加,样品的介电常数表现出较好的稳定性,介电损耗略有减小,且基本保持在tanδ=0.05以下,其漏电流先增大后减小,且掺杂样品均可得到比较完整的电滞回线.     

一个包含Smarandache Ceil函数的对偶函数的方程

利用初等方法研究了一个包含Smarandache Ceil函数Sk(n)的对偶函数-Sk(n),给出了当k=6时方程-S6(1)+-S6(2)+…+-S6(n)=6Ω(n)的具体正整数解。     

2种煤液化残渣氧化萃余物中杂原子化合物的鉴定

在40℃恒温水浴下用次氯酸钠对2种煤液化残渣进行氧化,将反应所得混合物用滤膜过滤,滤出液依次用石油醚、二硫化碳、四氯化碳和乙酸乙酯萃取,得到的萃取物用气相色谱/质谱(GC/MS)分析.根据分析结果系统地考察了2种煤液化残渣中所含杂原子化合物的分布,为从煤液化残渣中选择性地脱除这些杂原子化合物及提取高附加值化学品提供了一条路径.     

冬枣贮藏效果与相关酶活性的相关研究

以鄂北冬枣为材料,对果实采后低温贮藏过程中相关酶活性与果实硬度进行相关分析、通径分析和灰色关联分析。分析结果表明,各相关酶活性与硬度的相关程度依次为PG、SOD、CAT、PME、POD,与果实硬度的贡献率大小依次为PG、CAT、SOD、PME、POD,与果实硬度的关联度顺序为PME、SOD、PG、CAT、POD。综合分析结果表明,PG活性、CAT活性、SOD活性为果实贮藏过程中主要的酶,在贮藏过程中对果实软化衰老起重要作用。