Supported nickel bromide catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate

A new supported catalytic system, i.e. nickel bromide catalyst ligated by triphenylphosphine (TPP) ligands immobilized onto crosslinked polystyrene resins (PS-TPP) is reported. Per se, this catalyst does not allow any control over the polymerization of methyl methacrylate (MMA) initiated by ethyl 2-bromoisobutyrate but, in the presence of a given amount of purposely added free TPP, it promotes controlled ATRP of MMA. Indeed colorless PMMA chains of low polydispersity indices are readily recovered, the molecular weight of which linearly increases with monomer conversion and agrees with the expected values. Recycling of the supported catalyst is evidenced and does not prevent the polymerization from being controlled.     

Preparation of Well‐Defined Poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] Diblock Copolymers by Water‐Based Atom Transfer Radical Polymerization

Summary: Well‐defined poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] diblock copolymers [P(EO_m‐b‐AMPS_n)], have been obtained by water‐based ATRP using α‐methoxy‐ω‐(2‐methylbromoisobutyrate) poly(ethylene oxide)s (MeO‐P[EO]_m‐BrⁱB with m ranging from 12 to 113) and CuBr · 2Bpy (Bpy for 2,2′‐bipyridyl) as macroinitiator and catalytic complex, respectively. Compared to direct polymerization in water, it has been demonstrated that the water/methanol (3:1, v/v) mixture is better suited for predicting the final number‐average molar mass from the initial monomer‐to‐macroinitiator molar ratio and achieving a quite narrow polydispersity, even at high monomer conversion ( ≈ 1.4 at 80% conversion). The effect of temperature, solvent mixture composition and addition of NaCl salt on the polymerization rate and extent of control over the copolymer molecular parameters have been highlighted as well.

     

Solvent-free synthesis and purification of poly[2-(dimethylamino)ethyl methacrylate] by atom transfer radical polymerization

Solvent-free synthesis of well-defined poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) (co)polymers was performed by atom transfer radical polymerization conducted under very mild conditions (in bulk at 25 degrees C). The pH-dependence and the thermo-responsive behaviour of PDMAEMA in aqueous solution were operated to isolate and purify the (co)polymers without using any organic solvent or further catalyst extraction. The viscosity in aqueous solution of so-purified PDMAEMA homopolymers and their block copolymers with poly(ethylene glycol) (PEG) was studied as a function of molar mass and concentration and a typical polyelectrolyte behaviour was observed, these catalyst-deprived polycations are able to form stable and non toxic complexes with DNA, showing good transfection efficacies in gene therapy.     

Sodium Nitrophenolates as Model Compounds in Studies of Proton Transfer Complexes of Nitrophenols with Trialkylamines

The similarity of spectral properties of ionic complexes of nitrophenols with trialkylamines and corresponding sodium nitrophenolates with crown ethers, has been found. The application of this fact in studies of equilibria of hydrogen bonding - proton transfer type is proposed.     

Synthesis of adaptative and amphiphilic polymer model conetworks by versatile combination of ATRP,ROP, and “Click chemistry”

Well‐defined adaptative and amphiphilic polymer conetworks based on hydrophilic poly(N,N‐dimethylamino‐2‐ethyl methacrylate) (PDMAEMA) and hydrophobic poly(ε‐caprolactone) (PCL) have been prepared by combination of ATRP, ROP, and “Click chemistry.” Telechelic α,ω‐alkyne terminated PCL crosslinker was obtained by ring‐opening polymerization (ROP) of CL in THF at 80 °C initiated by 1,4‐butanediol and catalyzed by tin(II) bis 2‐ethyl hexanoate (Sn(Oct)₂), followed by the quantitative esterification of hydroxyl end‐groups by activated 4‐pentynoic acid. In parallel, an azido‐containing PDMAEMA‐based copolymer was obtained in a three‐step strategy involving primarily the copolymerization of DMAEMA with newly synthesized 2‐(2‐azidoethoxy)ethyl methacrylate (AEEMA) monomer. The latter was obtained by nucleophilic substitution of chloride atom from 2‐(2‐chloroethoxy)ethanol by an azide group followed by the esterification reaction of the hydroxyl group with methacrylic anhydride. The copolymerization was carried out in an equivolumic mixture of H₂O and isopropanol at r.t. and initiated by a ω‐bromoisobutyryl oligo PEO macroinitiator in the presence of various ligated copper(I)‐based catalysts. In a last step, both polymer precursors were chemically linked by the Huisgen‐1,3‐dipolar cycloaddition in anhydrous THF at r.t. using CuBr complexed by 2,2′‐bipyridine ligand as catalyst. Final material was characterized by the means of DSC and SEM, both attesting of a homogeneous distribution of the PCL crosslinkers and a highly porous structure in this new amphiphilic model conetworks. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4997–5013, 2008     

Copolymerization of vinyl acetate with 1-octene and ethylene by cobalt-mediated radical polymerization

The cobalt-mediated radical polymerization of vinyl acetate was extended to copolymerization with 1-alkenes (ethylene or 1-octene). In agreement with the low amount of 1-alkene that could be incorporated into the copolymer, a gradient structure was predictable, but a rather low polydispersity was observed. A poly(vinyl acetate)-b-poly(octene) copolymer was also successfully synthesized, leading to a poly (vinyl alcohol)-b-poly(octene) amphiphilic copolymer upon the methanolysis of the poly (vinyl acetate) block. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2532–2542, 2007     

Mechanistic study of Bu2SnCl2-mediated ring-opening polymerization of epsilon-caprolactone by multinuclear NMR spectroscopy

The ring-opening polymerization (ROP) of epsilon-caprolactone (CL) was carried out in toluene at 100 degrees C with n-propanol (nPrOH) in the presence of Bu(2)SnCl(2). It comes out that the molar mass of the polyester chains can be predicted from the initial monomer-to-alcohol molar ratio in accordance with a controlled ROP mechanism involving an O-acyl cleavage of the monomer to selectively form (alpha-propyloxy)(omega-hydroxy)poly(epsilon-caprolactone) chains. In order to gain fundamental understanding of the mechanistic factors governing the polyester chain growth, advanced (1)H, (13)C, and (119)Sn NMR investigations were performed in situ in [D(8)]toluene, as well as with model solutions that contained Bu(2)SnCl(2) and binary mixtures of the components at various concentrations and temperatures. This has enabled us to propose a mechanism in which Bu(2)SnCl(2) behaves as a catalyst, while nPrOH is the actual initiator. It involves non-aggregated, six-coordinate Bu(2)SnCl(2) complexes in which ligands exchange fast on the (119)Sn NMR observational timescale, and the simultaneous interactions of CL and alcohol function in such a way that it favors insertion/propagation reactions over transesterification ones, up to high monomer conversion.     

Novel biodegradable adaptive hydrogels: controlled synthesis and full characterization of the amphiphilic co-networks

Adaptive and amphiphilic poly(N,N-dimethylamino-2-ethyl methacrylate-graft-poly[epsilon-caprolactone]) co-networks (netP(DMAEMA-g-PCL)) were synthesized from a combination of controlled polymerization techniques. Firstly, PCL cross-linkers were produced by ring-opening polymerization (ROP) of epsilon-CL initiated by 1,4-butane-diol and catalyzed by tin(II) 2-ethylhexanoate ([Sn(Oct)2]), followed by the quantitative esterification reaction of terminal hydroxyl end-groups with methacrylic anhydride. Then, PCL cross-linkers were copolymerized to DMAEMA monomers by atom-transfer radical polymerization (ATRP) in THF at 60 degrees C using CuBr complexed by 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA) and 2-ethyl isobutyrylbromide (EiBBr) as catalytic complex and initiator, respectively. A comprehensive study of gel formation was carried out by employing dynamic light scattering (DLS) to determine the gel point as a function of several parameters and to characterize the viscous solutions obtained before the gel point was reached. The evolution of the mean diameters was compared to a model previously developed by Fukuda and these attest to the living formation of the polymer co-network. Furthermore, we also demonstrated the reliability of ATRP for producing well-defined and homogeneous polymer co-networks by the smaller deviation from Flory's theory in terms of cross-linking density. For sake of clarity, the impact of polymerization techniques over the final structure and, therefore, properties was highlighted by comparing two samples of similar composition, but that were produced by either ATRP or thermal-initiated free-radical polymerization (FRP).     

Polystyrene-supported organotin dichloride as a recyclable catalyst in lactone ring-opening polymerization: assessment and catalysis monitoring by high-resolution magic-angle-spinning NMR spectroscopy

Dialkyltin dichloride grafted to a cross-linked polystyrene, with the formula [P-H]((1-t))[P-(CH2)nSnBuCl2]t (P=[CH2CH(pC6H4)], t=the degree of functionalization, and n=6 or 11), is investigated as a recyclable catalyst in the ring-opening polymerization (ROP) of epsilon-caprolactone (CL). It is demonstrated that high-resolution magic-angle-spinning (HR-MAS) NMR spectroscopy is an invaluable tool to characterize completely the supported catalyst. The 2D 1H-13C HSQC HR-MAS spectrum, in particular, allowed extensive assignment of the 1H and 13C resonances, as well as accurate measurement of the (n)J((1)H-(117/119)Sn) and (n)J((13)C-(117/119)Sn) coupling constants. 1H and 119Sn HR-MAS NMR spectroscopy is presented as a monitoring tool for catalytic processes based on organotin compounds, particularly for the investigation of the extent to which polymerization residues are observable in situ in the material pores and for the assessment of the chemical integrity and recycling conditions of the grafted catalyst. From polymerization experiments with CL, initiated by n-propanol and with [P-H]((1-t))[P-(CH2)nSnBuCl2]t of various compositions as the supported catalyst, it appears that a partial 'burst' of the polystyrene support occurs when the length of the alkyl spacer is limited to n=6, as a result of polymer chains growing within the pores of the support. However, extension of the length of the aliphatic polymethylene spacer from 6 to 11 carbon atoms preserves the support integrity and allows the production of catalyst-deprived poly(epsilon-caprolactone) (PCL) oligomers. A preliminary attempt to recycle the heterogeneous catalyst has shown that very good reproducibility can be obtained, in terms of both catalyst activity and molecular-weight parameters of the as-recovered PCL polyester chains.