排序方式: 共有20条查询结果,搜索用时 31 毫秒
1.
2.
基于光纤布喇格光栅调谐的增益控制掺铒光纤放大器 总被引:5,自引:0,他引:5
在掺铒光纤放大器的输人端和输出端分别接入一个波长相同的光纤布喇格光栅,利用简支梁波长调谐的方法调节两布喇格光栅波长的间距,在一定范围内,实现了增益大小可调的增益控制.在增益控制范围内,EDFA的增益控制在0.4dB之内。 相似文献
3.
Synchronously Pumped Mode-Locked 1.89 μm Tm-Doped Fiber Laser with High Detuning Toleration 下载免费PDF全文
We propose and demonstrate a synchronously pumped mode-locked Tm-doped fiber(TDF) laser without any extra mode-locking elements. Pumped by a 1.56 μm pulse fiber laser, the TDF laser generates 1.17 ps pulses with a spectral width of 9.7 nm and a repetition rate of 9.33 MHz. The emission wavelength is tunable along with the cavity length detuning in a wide range of 3 mm. The high detuning toleration is beneficial to achieve high temperature and vibration stability in all-fiber configuration lasers. 相似文献
4.
5.
A passively Q-switched Nd3 :YAG laser with corner cube is theoretically and experimentally studied. We analyze the polarization variation in cavity and simulate the peak power, pulse energy and pulse width changed with the rotation angle of corner cube numerically. An experiment is made to verify the theoretical results. With rotating the angle of corner cube about the axis the variation range of peak power is 1.77 MW (from 10.36 to 8.59 MW), and that of pulse energy is 14.9 mJ (from 159.5 to 174.4 mJ), the fluctuation of pulse width is 2.95 ns. The experimental results agree with the theoretical analysis to the extent of variation rules. The most dynamic to static energy ratio of 62.5% is achieved. 相似文献
6.
7.
8.
文章通过实验研究了基于线形腔和复合腔结构的布里渊掺铒混合增益光纤激光器的输出特性。采用1 km单模石英光纤作为布里渊增益介质,研究了该布里渊激光器的输出特性参数与泵浦波长、泵浦功率、腔型结构等因素的关系。通过实验分析,得出线形腔和复合腔2种结构在不同布里渊泵浦波长条件下产生一阶斯托克斯光时的1 480 nm激光器的阈值泵浦功率,并研究了高阶斯托克斯光输出随1 480 nm激光器泵浦功率的变化情况;布里渊波长从1 540 nm变化到1 570 nm时,线形腔和复合腔阈值泵浦功率分别在139~172 mW及196~294 mW范围变化;保持1 480 nm激光器泵浦功率为623 mW,增大布里渊泵浦功率,2种结构都获得了最多达到10个波长的稳定激光输出。 相似文献
9.
10.
本文通过对M-Z干涉仪的透射谱进行数值模拟对掺铒光纤放大器(EDFA)的增益谱的不平坦性进行了改善,对不同级联数目的M-Z干涉仪进行了数值模拟并将平坦之后的结果作比较,达到了该掺铒光纤放大器在26 nm的范围内增益的变化小于±0.37 dB. 相似文献