腐蚀对风车联合作用下斜拉桥拉索 疲劳可靠性的影响分析

为探讨腐蚀对随机交通和风载联合作用下斜拉索疲劳可靠性的影响规律和机理,通过拉索高强钢丝的加速腐蚀和疲劳试验,提出了考虑腐蚀的斜拉索疲劳抗力模型;基于线性累积损伤准则,建立了考虑腐蚀影响的风车联合作用下拉索疲劳可靠性的分析方法和流程;依托工程实例,分析了腐蚀等级和时变腐蚀对拉索疲劳可靠性的影响.结果表明:随腐蚀加剧拉索动态疲劳可靠指标下降速率增大;等级达到Ⅲ级及以上的腐蚀对拉索疲劳可靠寿命影响显著,尤其对于靠近桥塔及辅助墩处拉索;Ⅳ级和Ⅴ级腐蚀时拉索疲劳寿命相对无腐蚀状况降幅最大分别达24%和44%;相对完好状况,时变腐蚀影响下拉索的动态疲劳可靠指标下降更为迅速,且降幅明显大于仅考虑腐蚀分级的状况.     

实时系统开发与PEARL语言

本文讨论了实时系统的特征、开发方法、设计工具、实现手段工具等开发过程中的主要问题,论述了实时系统开发语言PEARL及该语言的对实时系统的主要支持.     

电光全内反射调制

研究各种无侵袭电光采样技术,尤其是研究电信号在半导体中的传播技术是有意义的。通常是根据施加电场所引起的寻常光线和非常光线的指数变化来讨论电光效应,这种变化与外加电场成正比。调制电场和光场之间电光晶体中的相互作用产生光场的垂直分量。把电光晶体放在交叉偏振器之间,这种效应可以转换为一种强度调制。     

类镍离子（AgXX—XeХХⅦ）能级,跃迁波长和振子强度的理…

本文用ＭＣＤＦ方法计算子类镍离子（ＡｇХХⅦ）的ｎ＝３，４的能级结构，ｎ＝３－４跃迁波长和振子强度，所得结果比最近国外发表结果（ＰｈｙｓＳｃｒｉｐｔａ，４３，１５０（１９９１）更接近实验值，为高剥离态离子谱线的辩识以及短波长激光的研究提供了有益的参考。     

B_2分子X~3Σ_g~-和A~3Σ_u~-态的势能函数

使用SAC/SAC-CI方法,利用D95(d),6-311g**以及cc-PVTZ等基组,对B2分子的基态(X3Σg-)和第一激发态(A3Σu-)的平衡结构和谐振频率进行了优化计算.通过对3个基组的计算结果的比较,得出了D95(d)基组为3个基组中的最优基组的结论;使用D95(d)基组,利用SAC的GSUM(Group Sum of Operators)方法对基态(X3Σg-),SAC-CI的GSUM方法对激发态(A3Σu-)进行单点能扫描计算,用正规方程组拟合Murrell-Sorbie函数,得到了相应电子态的完整势能函数;从得到的势能函数计算了与基态(X3Σg-)和第一激发态(A3Σu-)相对应的光谱常数(Be,αe,ωe和ωeχe),结果与实验数据吻合.     

超细CaO粉炉内喷射脱硫的实验研究

本文对超细ＣａＯ粉炉内喷射脱硫进行了实验研究，分析了可能影响超细ＣａＯ粉炉内脱硫效率的多种因素，实验结果表明：使用预先锻烧生成的超细ＣａＯ粉在并不苛刻的反应条件下脱硫效果很好，颗粒大小、反应区温度、反应时间和Ｃａ／Ｓ比对炉内喷钙脱硫的效率有重要的影响．     

凹整数规划的分枝定界解法

凹整数规划是一类重要的非线性整数规划问题，也是在经济和管理中有着广泛应用的最优化问题．本文主要研究用分枝定界方法求解凹整数规划问题，这一方法的基本思想是对目标函数进行线性下逼近，然后用乘子搜索法求解连续松弛问题．数值结果表明，用这种分枝定界方法求解凹整数规划是有效的．     

A Compact Magnetically Insulated Line Oscillator with New-Type Beam Dump

We present a compact improved model of the magnetically insulated line oscillator with new-type beam dump and other novel features. In the experiments, high-power microwave of the TM01 mode is generated from the device with a frequency range of 1.73-1.78 GHz and a peak power level of above 2 GW, when the diode voltage is taken in the range 520-540kV, and the diode current is in the range 58-62kA. This confirms the simulation results.     

Spin polarization effect for Tc2 molecule

Density functional method (DFT) (B3p86) of Gaussian98 has been used to optimize the structure of the Tc_2 molecule. The result shows that the ground state for Tc_2 molecule is an 11-multiple state and its electronic configuration is {}^{11}Σ_g^-, which shows the spin polarization effect of Tc_2 molecule of a transition metal element for the first time. Meanwhile, we have not found any spin pollution because the wavefunction of the ground state does not mingle with wavefunctions of higher energy states. So, that the ground state for Tc_2 molecule is an 11-multiple state is indicative of the spin polarization effect of Tc_2 molecule of a transition metal element: that is, there exist 10 parallel spin electrons. The non-conjugated electron is greatest in number. These electrons occupy different spacious tracks, so that the energy of Tc_2 molecule is minimized. It can be concluded that the effect of parallel spin of the Tc_2 molecule is larger than the effect of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell--Sorbie potential functions with the parameters for the ground state {}^{11}Σ_g^- and other states of Tc_2 molecule are derived. Dissociation energy D_e for the ground state of T_{c2} molecule is 2.266eV, equilibrium bond length R_e is 0.2841nm, vibration frequency ω_e is 178.52cm^{-1}. Its force constants f_2, f_3, and f_4 are 0.9200aJ·nm^{-2}, --3.5700aJ·nm^{-3}, 11.2748aJ·nm^{-4} respectively. The other spectroscopic data for the ground state of Tc_2 molecule ω_eχ_e, B_e, α_e are 0.5523cm^{-1}, 0.0426cm^{-1}, 1.6331×10^{-4}cm^{-1} respectively.     

A New High Efficiency Multiwave Cerenkov Generator Operating at Low Magnetic Field

With a resonant cavity inserted between the second slow-wave-structure section and the tapered wavegulde, a new structure of the multlwave Cerenkov generator (MWCG) operating at low guiding magnetic field is proposed to produce high efficiency and high power microwave. Some features and potential advantages of the proposed device are analysed. The 2.5-dimensional partlcle-in-cell simulation is employed to verify the initial expectation.The results show that, with the use of an electron beam of 640keV and 8.4kA guided by the magnetic lield of 0.6 T, a stable and monochromatic X-band microwave output of 4 GW in peak power is achieved, and the average efficiency is over 30%.