基于Petri网的PLC程序设计

随着生产过程复杂性的增加,对系统的控制也更加复杂.传统的PLC程序设计方法,已不适用于诸如协调、竞争等控制的设计.需要寻求新的程序设计方法来满足复杂的控制要求.本文介绍了基于Petri网的PLC程序设计.     

气相色谱法测定甲氯噻嗪中的甲醇含量

目的 为建立甲氯噻嗪中甲醇有机溶剂残留量的气相色谱测定法。采用2．1米不锈钢拄，内径3mm，内装二乙烯苯一乙基乙烯苯型高分子多孔小球（O．25～0．32mm）为固定相，柱温125℃，FID检测器，温度：200℃。以外标法测定甲氯噻嗪中的甲醇的残留量。结果在50～500μ／mL范围内，线性良好，r=0．9985，平均回收率98．7％（n=6）RSD为5．6％。本法简便、灵敏、准确，可用于控制产品质量。     

Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Helium-charged nanocrystalline titanium films have been deposited by HeAr magnetron co-sputtering. The effects of substrate temperature on the helium content and microstructure of the nanocrystalline titanium films have been studied. The results indicate that helium atoms with a high concentration are evenly incorporated in the deposited titanium films. When the substrate temperature increases from 60℃ to 350℃ while the other deposition＇parameters are fixed, the helium content decreases gradually from 38.6 at.% to 9.2at.%, which proves that nanocrystalline Ti films have a great helium storage capacity. The 20 angle of the Bragg peak of （002） crystal planes of the He-charged Ti film shifts to a lower angle and that of （100） crystal plane is unchanged as compared with that of the pure Ti film, which indicates that the lattice parameter c increases and a keeps at the primitive value. The grain refining and helium damage result in the diffraction peak broadening.     

活动标形及其在点啮合齿轮传动误差分析中的应用

活动标形法的论述首推苏步青译，佐佐木重夫著《微分几何学》，还有的著作从外微分形式引入活动标形,本文论证取曲面的正交曲率网为参数网时，曲面论的基本公式就是活动标形的微分形式，并用其分析了点啮合齿轮传动误差．     

引射式射流风机结构参数的研究

根据地下通风工程以较小的能耗获得较大风量的需要，运用流体力学的基本理论和模型试验研究方法，系统研究了引射式射流风的通风原理和结构参数，为引射式射流风机的设计提供依据。     

“阳”加速器钼丝X-pinch初步实验研究

 在“阳”加速器上进行了直径分别为10, 15, 20 μm, 交叉角为32°,45°,60°的钼（Mo）丝X-pinch实验。“阳”加速器产生的电流峰值约520 kA，上升时间80 ns。实验中通过X射线功率谱仪和纳秒分幅相机等仪器对Mo丝X-pinch辐射特性进行了诊断。实验表明：Mo丝X-pinch过程中会出现多次X射线爆发，箍缩过程中产生的热点辐射出能量超过3 keV的X射线，探测到的最小热点直径小于30 μm。     

An Economical Magnetocardiogram System Based on High-To SQUIDs

An economical magnetocardiogram （MCG） system is built in our laboratory. It mainly consists of a MCG data acquisition stage equipped with two high-To superconducting quantum interference device （SQUID） magnetometers, a data processing stage with digital filtering and a one-layer μ-metal magnetically shielded room in conjunction with a high-Tc SQUID based active compensation. Experimental results show that a noise level of pico-tesla in MCG profiles, which is necessary for clinical applications, may be achieved with the system. Moreover, stable and convenient operations of the system are demonstrated with simulating MCG measurements.     

树木修剪量化考核指标探讨

通过多年一体化教学实践，总结出树木修剪实习考核的量化指标，适合于园林绿化专业学生，便于合理地评价树木修剪的效果和学生操作水平。