一类可化为一阶线性微分方程的微分方程求解

通过变量变换,将一类非线性微分方程化为一阶线性微分方程,从而求出其通解.     

ICP-MS法测定黔产枳椇果梗、枳椇子中22种金属元素

建立微波消解-电感耦合等离子体质谱(ICP-MS)法同时分析枳椇果梗、枳椇子中Be、Mg、Al、Ti、V、Cr、Mn、Fe、Co、Ni、Cu、Zn、As、Sr、Mo、Ag、Cd、Sn、Sb、Ba、Tl、Pb等22种元素的含量。样品经微波消解后,利用ICP-MS测定上述22种元素,通过标准曲线计算其含量。实验结果表明,22种元素在其线性范围内线性关系良好,r值0.995;检出限为0.0007～1.0713μg/L;重复性的相对标准偏差(RSD)3%;精密度的相对标准偏差(RSD)7%;回收率为81.14%～112.91%。该方法灵敏度高,重复性好,分析速度快,适用于枳椇果梗、枳椇子中22种元素的含量测定。     

关于Semigroups of Linear Operators and Applications to Partial Differential Equations的两个注解

指出文献[1]关于Co半群可微性的定理2.4.11的证明过程中一处错误，及关于柯西问题解的指数衰变的定理4.4.1的证明过程中的不妥之处，并给出新的证明。     

Characterization of ZnO:AI films deposited by r.f.magnetron-sputtering at low temperature

Transparent conducting ZnO:AI thin films with good adhesion and Iow resistivity have been prepared on organic substrates and Coming 7059 glass substrates by r.f. magnetron-sputtering technique at Iow substrate temperature (25-210℃). Structural and photoelectric properties of the deposited films are investigated. The deposited films are polycrystalline with hexagonal structure and a preferred orientation with the c-axis perpendicular to the substrate. Only the (002) peak is observed.High quality films with resistivity as Iow as 1.0 x 10- 3Ω@ cm and 8.4 x 10- 4Ω@ cm, the average transmittance over 74% and 85% in the wavelength range of the visible spectrum have been obtained on different substrates.     

多重积分Nash平衡点的Lipschitz估计

设F（p，q）和G（p，q）在无穷远点的邻域内是分别关于p和q的近似凸函数，且具有二次增长．考虑由F和G构成的一对定义在Soblev空间中的泛函．本文利用blowup技巧，证明了这样一对泛函的Nash平衡点实际上是Lipschitz连续的．     

MATLAB软件在信号与系统教学中的应用

本文论述了在信号与系统分析中如何利用MATLAB软件编程使一些运算量较大、抽象的问题变得简单而直观。     

Conservation Laws in sine—Gordon Equation

There are two conservation quantities needed to derive conservation laws of sine-Gordon equation in a frame of laboratory reference.one of them could be derived easily with a standard process,but the other could not .After the gauge transformation e^-iθσ2/2is introduced,we simply obtain the other one without any questionable assumption.     

38CrMnMo钢异常断口的分析

用扫描电镜KYKY－1000、能谱仪观察分析了38CrMnMo钢（调质热处理）拉伸实验后的异常断口，结果表明：钢中冶金夹杂物是导致38CrMnMo钢异常脆性断裂的主要原因。