从中英两大自然诗人及其诗作看中西自然观的差异

中国汉晋时代的陶渊明和英国19世纪上半期的浪漫主义诗人威廉·华兹华斯常被相提并论为自然诗人。然而纵观其作品,他们所处的时代背景以及东西方不同的文化背景和宗教观,发现他们两人及他们的诗作也是迥然不同,不可相提并论。本文旨在通过分析他们的作品以及东西方的不同历史,文化背景来探讨他们思想与作品的根本差异。     

高电压锯齿波聚束器的设计研制

近些年来,使用锯齿波直接形成的方法建造非谐振型聚束器在国内及国际均得到了广泛的应用。由于电子技术及机械加工工艺的飞速发展和更高功率电子管的出现,可以设计出更高指标的聚束器,进而可以有效提高束线的匹配效率及运行稳定度。对兰州重离子加速器源束线新的高电压锯齿波聚束器的研制进行了详细阐述,由于该聚束器具有目前国际同类型设备中最高的电压、频率以及相对苛刻的现场条件限制,故还对设计中所涉及的工程实施方案进行了有效补充和完善。     

HIRFL新B1聚束器频率微调系统的设计及稳定性分析

 频率自动调谐系统是聚束器的重要组成部分之一。频率调谐系统成功的研制和投入使用达到了使谐振腔体的固有谐振频率在22～54 MHz的范围内自动稳定在输入信号频率上的目的,频率自动微调系统达到了±5×10^-6的频率稳定度,解决了由于腔体失谐所造成的高频电压滑落的问题,由此在腔体的加速缝隙间得到稳定的高频电压,保证了聚束器系统的高质量可靠运行。     

Study of influence of radial matcher section end shape on RFQ cavity frequency

To investigate the feasibility of using a form cutter to machine the Radial Matcher Section (RMS) of the Radio Frequency Quadrupole (RFQ) for the Accelerator Driven System (ADS) project at Institute of Modern Physics, Chinese Academy of Sciences (IMP, CAS), the influence of RMS end shape on the RFQ cavity frequency is studied. The results indicate that using a form cutter to machine the RMS of an RFQ will indeed influence the cavity frequency. The RMS end shape will give more influence to a shorter RFQ cavity. For the 4.2 m ADS RFQ, the influence is negligible, which means that a form cutter can be used to machine the RMS.     

C-ADS注入器Ⅱ项目RFQ射频系统介绍（英）

C-ADS注入器Ⅱ的RFQ射频系统是该强流加速器的关键一环,它通过两台完全一样的耦合器为一台四边形四翼型RFQ提供和传送功率。该射频系统在设计之初就考虑为10 mA连续束流而进行特殊优化,从功率源、耦合器和功率传输系统几个方面对其进行详细介绍,尤其是针对CW模式下的系统稳定运行以及设备可靠性等方面进行的特殊考虑和模拟方法。该系统已经在2015年通过了10 mA连续束的测试,证实了该射频系统的设计和调试符合物理的实验需求。特别阐述了该系统中一种新的碗型陶瓷窗耦合器的设计思路和一种无环形器情况下的特殊的耦合系数调谐方法,同时推导了双端口耦合的计算方法的具体设置过程。     

Design of the new couplers for C-ADS RFQ

A new special coupler with a kind of bowl-shaped ceramic window for a proton linear accelerator named the Chinese Accelerator Driven System (C-ADS) at the Institute of Modern Physics (IMP) has been simulated and constructed and a continuous wave (CW) beam commissioning through a four-meter long radio frequency quadruple (RFQ) was completed by the end of July 2014. In the experiments of conditioning and beam, some problems were promoted gradually such as sparking and thermal issues. Finally, two new couplers were passed with almost 110 kW CW power and 120 kW pulsed mode, respectively. The 10 mA intensity beam experiments have now been completed, and the couplers during the operation had no thermal or electro-magnetic problems. The detailed design and results are presented in the paper.     

一米长四翼型RFQ调谐研究(英文)

为获取ADS工程中四翼型RFQ加速器在设计、调谐和运行等方面的经验,设计和建造了一台一米长四翼型RFQ加速器。该RFQ的设计频率为162.5 MHz,但是测量结果显示即使没有调谐器时,腔体的频率也为163.7 MHz。为降低腔体频率,使用四线模型理论进行了分析并重新设计了腔体的端板。使用了二极模稳定杆来加大四极频率与相邻二极频率的间隔。最终测量结果显示,在腔体电压分布没有大的波动的情况下腔体频率达到了设计频率。同时,腔体Q值降低了1%,这就要求需要更多的功率注入腔体。使用水对二极模稳定杆进行了冷却,以便腔体能够稳定工作。     

四杆与四翼型RFQ内的二极场研究

RFQ (射频四极透镜) 是直线加速器中最重要的前级聚焦加速结构，其工作模式下束流孔中的电场四极对称性是保证束流品质及加速效率的关键。为了解决其各自存在的工作模式下四极场的不对称问题，分别对四杆型RFQ 和四翼型RFQ 的结构和模式谐振特性做了研究。针对四翼型RFQ，模拟显示双端口对称耦合的方式从抵消二极模式和提高结构对称性两方面来达到削弱工作模式下的场分布中二极量的目的，对一个1 m段四翼RFQ 模型腔的测量证实了双端口对称耦合抵消腔内二极模式的有效性；针对四杆型RFQ 的二极场，以SSC-Linac 项目的RFQ 为原型，利用三维模拟计算软件CST-MWS 进行模拟，通过改进支撑板的结构并调整参数，完全地消除了工作模式下的极间二极场，且理论上此种改进方法对支撑板结构的四杆型RFQ 均有效。Radio Frequency Quadruple(RFQ) is the most important front-end acceleration structure in linear accelerators.It can focus and accelerate beam in longitudinal and transversal direction, simultaneously. Symmetric of electric field in acceleration aperture is very important for the beam dynamics. To an idea RFQ, there is only quadruple electric field in the acceleration aperture. The dipole field in aperture is harmful and need be as small as possible. The methods to reduce it are studied in a four-rod RFQ and a four-vane RFQ in the article ndependently. To a four-vane RFQ, the symmetrical double-port couplers are employed to counteract the neighboring dipole modes. The availability is confirmed by the simulation with the 3-D Finite Element tool, CST-MWS. And it is also observed by measuring a model-cavity with a symmetrical double-port couplers. To a four-rod RFQ, a new structure of stems is proposed to reduce the dipole mode.Taking the RFQ for the SSC-LINAC project as example, the dipole mode contributions to the electric filed is completely eliminated by selecting stem’s parameters carefully. It is confirmed by the simulation of CST-MWS. heoretically, this method is independent with the frequency of an RFQ and serves for all RFQs with 4-rod or 4-wane structure.     

DPIS-RFQ系统的高频参数测试及功率锻炼

中国科学院近代物理研究所于2007年开始进行等离子体直接注入项目的预研。详细介绍了RFQ系统的高频参数测试的方法及结果,并针对高脉冲功率的测试提出通过标定定向耦合器来测试脉冲功率的方法。介绍了系统锻炼的情况,包括针对功率源末级和腔内电极的打火问题提出了理论的分析和改善的方法。高频参数的测试和载束实验证实整套系统满足加速器的设计要求。