排序方式: 共有33条查询结果,搜索用时 140 毫秒
1.
材料研究的深入和相关工业的需求 ,推动材料向模型化、定量化的方向发展。模型化和组织演变预测技术是研究钢铁热轧过程预测不同化学成分、不同工艺条件下组织演变规律与性能的投资小、见效快的好方法。本文较系统总结了钢铁材料热轧过程中动态再结晶组织演化的数学模型 ,静态再结晶组织演化的数学模型和晶粒尺寸数学模型的描述 ,并给出了它们的适用条件及范围和发展方向 相似文献
2.
The us of stochastic resonance (SR) can effectively achieve the detection of weak signal in white noise and colored noise. However, SR in chaotic interference is seldom involved. In view of the requirements for the detection of weak signal in the actual project and the relationship between the signal, chaotic interference, and nonlinear system in the bistable system, a self-adaptive SR system based on genetic algorithm is designed in this paper. It regards the output signal-to-noise ratio (SNR) as a fitness function and the system parameters are jointly encoded to gain optimal bistable system parameters, then the input signal is processed in the SR system with the optimal system parameters. Experimental results show that the system can keep the best state of SR under the condition of low input SNR, which ensures the effective detection and process of weak signal in low input SNR. 相似文献
3.
4.
5.
针对在信道环境恶劣的情况下,数字信号接收端的误码率较高的问题,提出一种基于自适应参数调节双稳随机共振系统降低误码率的新方法,得到了输入信噪比小于0db、相干解调接收二进制相移键控信号(binary phase shift keying,简记为2PSK)条件下,系统误码率与输入信噪比的仿真曲线。研究表明:通过非线性双稳系统的2PSK在输入信噪比达到-7.4db时较传统线性解调系统误码率可降低20.1%,这正是对2PSK信号在信道环境恶劣情况下传输的一个补充,对数字带通信号传输具有一定的参考价值。 相似文献
6.
对33Mn2V钢进行了热轧试验,得出峰值应力和峰值应变是随着变形温度的降低和变形速率的增大而增大的。引入流变应力计算模型,通过与试验数据对比,得出流变应力模型完全可以应用于实际的工程计算。因此可以利用此模型对材料高速应变状态下的流变应力进行模拟,建立相关材料的流变应力模型库。 相似文献
7.
INHOMOGENEOUS FLUCTUATION DISTRIBUTION IN THE OUTPUT OF STOCHASTIC RESONANCE SYSTEMS AND ITS APPLICATION
下载免费PDF全文
![点击此处可从《中国物理》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Inputting a periodic signal mixed with white noise into a bistable system, we find that the fluctuation distribution in the time series of the output is strongly inhomogeneous. In certain phase part fluctuation is very low under the stochastic resonance condition, and consequently, the signal-to-noise ratio (SNR) there is much higher than that of the input. This mechanism can be used to design a nonlinear receiver to extract the signed from noise with SNR three times higher than the largest SNR obtained so far by the optimal linear filter. 相似文献
8.
系统温度稳定性和脉冲飞行时间测量精度是影响脉冲激光测距系统整体性能的两大要素,利用ACAM公司生产的新一代高精度时间间隔测量芯片TDC-GP2可以在获得双通道、单通道65 ps高测时分辨率的同时,利用其自身高精度低功耗温度测量单元代替传统的温度传感器分立元件作为温控电路部分信号采集电路。在简化系统电路结构的同时优化了系统性能.在介绍TDC-GP2的主要功能和特性的基础上,利用其优良特性设计了一种小型高精度脉冲激光测距系统. 相似文献
9.
用电子线路模拟的方法对杜芬方程进行随机共振(SR)实验研究。发现在一定条件下通过改变阻尼系数可获得较高输出信噪比(SNR)。 相似文献
10.