排序方式: 共有65条查询结果,搜索用时 31 毫秒
1.
The conductivity of Polypyrrole-viscose conducting fiber prepared with author's method can be shown up to as high as 2.106x10~(-2) S/cm. The main factors influencing the conductivity are the concentration of FeCl_3 used as dopant and initiator, the treatment time of viscose fiber as base material in FeCl_3 solution, temperature and polymerization time. It is found that the orientation and crystallization degree of viscose fiber keep constant before and after conducting treatment and the mechanical properties of conducting fiber is the same as that of base material. In addition, the distribution of polypyrrole in viscose fiber, and its effect on the conductivity were investigated in details by TEM. 相似文献
2.
含向列液晶交联剂的液晶弹性体液晶性能 总被引:2,自引:1,他引:2
把向列液晶交联剂 4 (ω 烯丙酰氧基己氧基 )苯甲酸 2 叔丁基 1,4 二酚酯和胆甾液晶单体 4 烯丙氧基苯甲酸胆甾醇酯接枝到含氢硅氧烷链上 ,交联剂的质量分数由 0至 12 %,得到系列液晶弹性体P1~P7·通过热分析、偏光显微分析等手段研究了向列液晶交联剂对弹性体液晶性能的影响·结果表明 ,P1~P7都有液晶性能 ,均为胆甾液晶织构 ,系列液晶弹性体的tg 随交联剂在链中浓度增加而降低 ,ti 变化不大 ,具有较宽的液晶区间 ,在 182℃以上·交联剂质量分数为 2 %时 ,即从P4 开始弹性增加 ,当交联剂的质量分数大于 8%时 ,液晶相存在至热分解温度 ,所有液晶弹性体的热稳... 相似文献
3.
Blends of dodecylbenzene sulfonic acid doped polyaniline (PANI-DBSA) and polyacryionitrile (PAN) dissolved in either CHCh/DMF or CHCl3/DMSO mixture were solution cast. The conductivity of the blends with various compositions was measured and the doped :xtent of PANI- DBSA in different casting solvent systems was studied. Solution blends prepared from CHCh/DMSO displayed higher conductivity than those obtained via CHCh/DMF. The dedoping reaction of PANI-DBSA in CHCl3/DMF identified by UV-Vis and FTIR analysis contributed to the lower conductivity of PANI-DBSA/PAN blend. 相似文献
4.
聚酰亚胺研究新进展 总被引:5,自引:0,他引:5
汪称意|李光|江建明|杨胜林|金俊弘 《化学进展》2009,21(1):174-181
聚酰亚胺(PI)是一类重要的高性能聚合物,广泛应用在航空航天、微电子、汽车、石油等高科技领域。由于其结构上的可设计性,世界上越来越多的研究者投入到这类高技术材料的研究开发中。本文分别从可溶性PI的分子设计与合成、功能性PI的合成与用途、PI绿色合成方法、PI纳米复合材料的制备4个方面综述了近年来PI的研究热点和新进展,为了解聚酰亚胺的研究提供了有价值的信息。 相似文献
5.
本文主要对中粗旦聚丙烯 FDY 在成形过程中结构与性能的变化作了详细地研究。X-射线衍射、扫描电镜、DSC、纤维取向因子等测试结果表明,随拉伸倍数的提高,纤维的断裂伸长线性下降,而强度在拉伸5.8倍时出现极大值;纤维的取向度随拉伸倍数的提高线性增大,计算机分峰结果表明,在高应力状态下,纤维中次晶的生成速率大于α晶。随着拉伸倍数的不断提高,纤维逐渐出现裂缝、微孔及原纤化,结构的破坏导致纤维强度的下降。 相似文献
6.
8.
9.
10.
通过原位聚合制备稀土荧光聚酰胺6(PA6)预聚体,再通过固相缩聚进一步提高其相对分子质量,利用示差扫描量热仪(DSC)对固相缩聚前后的样品进行等温结晶动力学研究.结果表明稀土荧光PA6的结晶速率随相对分子质量的增加而减小.而荧光粉在PA6等温结晶过程中,荧光粉起到了异相成核的作用,使得PA6的结晶速率增加.通过Arrhenius方程求得PA6和稀土荧光PA6的活化能.发现由于固相缩聚后样品的相对分子质量变大,分子问的作用力增大.固相缩聚前样品的活化能要比固相缩聚后的活化能高.而荧光粉限制了PA6大分子链的运动,稀土荧光PA6的结晶活化能要比PA6的活化能高. 相似文献