关于检查井沉降与解决措施的研究

基于我国检查井施工中出现的不均匀沉降及相关施工问题的实际情况,针对导致上述问题出现的各方面原因进行分析,就优化设计、规范开挖及回填施工、强化检查井的砌筑等方面提出了相应解决措施.以期为我国市政管线建设中的检查井设计及施工提供借鉴.     

二代树状碳硅烷液晶研究Ⅰ.端基含36个丁氧基偶氮苯介晶基元

用发散法合成周边含36个丁氧基偶氮苯介晶基元(M5)端基新的二代树状碳硅烷液晶(D2),并用元素分析,氢谱,激光质谱,红外,紫外,偏光显微镜,DSC和WAXD法表征.D2为向列相,与M5相同,二代树状物相态由介晶基元相态决定.D2液晶态相行为是K85N107I103N69K,其熔点比M5降低27～41℃,清亮点比M5降低17～18℃,液晶态温区比M5加宽10～23℃.二代碳硅烷(D2)与一代碳硅烷(D1)相比熔点增加2～3℃,清亮点降低26～29℃,液晶态温区减少29～31℃.在二代树状物中观察到S=+3/2的高强向错.     

弹性体型聚氨酯和聚碳酸酯共混物的形态结构

用ＤＳＣ、ＷＡＸＤ和ＳＡＸＳ研究了溶液共混的弹性体型聚氨酯（ＰＵ）／聚碳酸酯（ＰＣ）共混物的结构。结果表明，ＰＵ／ＰＣ为部分相容体系；共混过程中，溶剂ＤＭＦ的诱导作用使ＰＣ形成结晶，其长周期与ＰＵ硬段形成微相的长周期相近     

聚己内酯和聚氧化乙烯共混体系中的两类片晶相间堆砌

对聚(ε-己内酯)(PCL)/聚氧化乙烯(PEO)共混物的相差显微镜、广角X-射线衍射(WAXD)、小角X-射线散射(SAXS)及示差扫描量热计(DSC)等的研究表明,只有当共混物中PCL(或PEO)的含量低于20％时,两组份是相容的.当PCL含量低于20％时,在共混物中形成了PEO片晶和PCL片晶相间堆砌的结晶形态,当PEO含量不超过20％时,PEO则完全以非晶形式混入PCL的非晶区,同时阻碍了PCL的结晶.可见在结晶过程中,相容的两组份对共混体系形态结构的影响却不尽相同.     

GIS系统简介及前瞻

GIS(Geography Information System,地理信息系统)是融合计算机图形和数据库于一体,用来存储和处理空间信息的高新技术,它把地理位置和相关属性有机地结合起来,根据用户的需要将空间信息及其属性信息准确真实、图文并茂地输出给用户,满足城市建设、企业管理、居民生活对空间信息的要求,借助其独有的空间分析功能和可视化表达功能,进行各种辅助决策.     

SYNTHESIS AND PURIFICATION OF N,N''''-E1S(P-CARBOMETHOXYBENZOYL)BUTANEDIAMINE(T4T-DIMETHYL)

T4T-dimethyl is commonly employed as hard segment when polyesteramide is produced. Polyesteramide is one of thermoplastic elastomers, like polyurethane which is composed of two different types of segments, usually referred to as soft and hard segments. The characters of hard segment have much influence on the properties of the polymer. To get the polyesteramide with high order, it is desirable to make T4T-dimethyl pure. In this paper, how to synthesize, to purify as well as to detect the purity of T4T-dimethyl are described in detail.     

多极场和脉冲星γ辐射

在Ａ－Ｓ模型的基础，讨论了脉冲星的γ射线辐射机制，考虑到偶极和四极场的作用后，给出脉冲星要成为γ射线脉冲星的判据，据此判据计算了１３颗可能成为γ射线脉冲星的光度和流量。     

点钞机机壳模态分析与降噪研究

针对点钞机振动噪声问题，采用试验模态分析技术对点钞机机壳进行模态分析，得出机壳的模态参数，进一步识别出点钞机的噪声源和振动源，并对机壳作了阻尼垫隔振处理，使标准点噪声声压级降低了1．5dB。     

The Effect of Casting Solvent on the Electrical Property of Polyaniline/ Polyacrylonitrile

Blends of dodecylbenzene sulfonic acid doped polyaniline （PANI-DBSA） and polyacryionitrile （PAN） dissolved in either CHCh/DMF or CHCl3/DMSO mixture were solution cast. The conductivity of the blends with various compositions was measured and the doped ：xtent of PANI- DBSA in different casting solvent systems was studied. Solution blends prepared from CHCh/DMSO displayed higher conductivity than those obtained via CHCh/DMF. The dedoping reaction of PANI-DBSA in CHCl3/DMF identified by UV-Vis and FTIR analysis contributed to the lower conductivity of PANI-DBSA/PAN blend.