巷道底板上锚杆布置形式对预防底鼓效果的模拟研究

本文采用三个边界元模型对巷道底板上锚杆的不同布置形式对防治底鼓的效果进行了模拟研究。根据研究结果,提出采用在巷道底板上分期安装锚杆的方法,可有效地防治巷道底鼓。本文对巷道底鼓产生机理和防治措施的研究结果,具有一定的理论价值和应用参考价值。     

Mass Spectral Fragmentation of (S,S)-N,N′-Bis [1-(hydroxymethyl)alkyl]anthracene/Naphthalene-1,8-dicarboxamides under Electron Impact Ionization Conditions

IntroductionN,N′-Bis [1-( hydroxymethyl) alkyl] dicarboxa-mides are important intermediates for the syntheses ofbis-oxazolines, which are a class of the most importantand widely used ligands in catalytic asymmetric reac-tions[1,2]. On determining the str…     

APPLICATION OF BORON MODIFIED SILICA SOL ON RETENTION AND DRAINAGE

INTRODUCTIONRecently with the high speed, large-scale develop-ment of papermaking, in the manufacture of paper and paperboard conventional single and dual reten-tion and drainage systems cannot obtain satisfying re-tention and drainage. So in 1980 microparticulate systems appeared. Because of its superiority such as good retention effectiveness on fine and chemicals, improving drainage and paper formation, reducing waste water and enhancing the concentration of white water for good recover…     

Mean Value on the Difference Between a Quadratic Residue and Its Inverse Modulo p

The main purpose of this paper is to use the generalized Bernoulli numbers, Gauss sums and the mean value theorems of Dirichlet L-functions between a quadratic residue and its inverse modulo p value formula. to study the asymptotic property of the difference （a prime）, and to give an interesting hybrid mean     

REDUCTION OF C=C DOUBLE BOND WITH BOROHYDRIDE EXCHANGE RESIN-TRANSITION METAL COMPOUND SYSTEMS

Borohydride exchange resin-transition metal(Co,Ni,Cu,)compoundsystems reduced C=C double to C-C single bond in ethanol.     

The recent progress of wide bandgap donor polymers towards non-fullerene organic solar cells

The recent progress of wide bandgap (WBG) donor polymers for non-fullerene polymer solar cells (NF-PSCs) were reviewed in detail, which was classified by D-type and D-A type molecular backbones to discuss the related structure-property correlations and put forward an outlook for future innovations.     

In-channel indirect amperometric detection of nonelectroactive anions for electrophoresis on a poly(dimethylsiloxane) microchip

In the present paper, we describe a microfluidics-based sensing system for nonelectroactive anions under negative separation electric field by mounting a single carbon fiber disk working electrode (WE) in the end part of a poly(dimethylsiloxane) microchannel. In contrast to work in a positive separation electric field described in our previous paper (Anal. Chem. 2004, 76, 6902-6907), here the electrochemical reduction reaction at the WE is not coupled with the separation high-voltage (HV) system, whereas the electrochemical oxidation reaction at the WE is coupled with the separation HV system. The electroactive indicator is the carbon fiber WE itself but not dissolved oxygen. This provides a convenient and sensitive means for the determination of nonelectroactive anions by amperometry. The influences of separation voltage, detection potential, and the distance between the WE and the separation channel outlet on the response of the detector have been investigated. The present detection mode is successfully used to electrochemically detect F-, Cl-, SO4(2-), CH3COO-, H2PO4-. Based on the preliminary results, a detection limit of 2 microM and a dynamic range up to three orders of magnitude for Cl- could be achieved.     

Electrothermal volatilization of aluminum as 1-phenyl-3-methyl-4-benzoylpyrazolone[5] chelate for gaseous sample introduction in ICP-AES

Based on gaseous compound introduction as 1-phenyl-3-methyl-4-benzoylpyrazolone[5](PMBP) chelate of aluminum by electrothermal vaporization in ICP-AES, a method for determination of trace aluminum was developed. Trace aluminum was vaporized at temperature of 1000 degrees C, and the vaporization behavior of aluminum chelate was detailedly investigated. Under the optimum conditions, the detection limit of aluminum was 0.6 ng ml(-1), and the relative standard deviation for 0.1 mug ml(-1) aluminum was 4.7% (n=8). The proposed method was applied to the determination of trace aluminum in rice flour reference materials, and the results well agreed with the reference values.     

On the interaction of UV screens with the lignocellulosic matrix

In this report, we describe our attempt to understand the photochemical interactions that occur between dihydroxybenzophenone (DHB)-based UV screens and lignin when high-yield pulps are treated with such materials. Milled wood lignin (MWL) and filter paper were used as models, and various irradiation protocols were carried out in the presence and absence of UV screens. After irradiation, the lignin and the UV screen were extracted and the products analyzed. These experiments showed that upon irradiation, fragments of MWL-containing chromophores were linked to cellulose via an acid-labile linkage. In the presence of UV screens, these reactions were minimized. Molecular weight measurements of the extracted lignin showed that the MWL is degraded upon solid-state irradiation. The samples that contained UV screens showed a reduced tendency to degrade. Using quantitative 31P NMR, it was possible to probe further the detailed structural changes that occurred in MWL during irradiation. In general, DHB-based UV screens and derivatives were found to interact actively with MWL when irradiated.     

Synthesis and characterization of Mn2P2S6 single-crystal nanorods and nanotubes

Mn2P2S6 single-crystal nanorods with diameters 20-40 nm and lengths up to 1 microm and nanotubes with diameters 40-50 nm and lengths ranging between 110 and 170 nm have been prepared through a low-temperature solvothermal method. They have been characterized by X-ray diffraction, transmission electron microscopy (TEM), high-resolution (HR) TEM, electron diffraction, energy-dispersive spectrometry analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy.