排序方式: 共有36条查询结果,搜索用时 15 毫秒
1.
实验利用旋涂法制备了一种明胶(Gelatin)和聚乙烯醇(PVA)的复合薄膜,通过金相显微镜、红外光谱、接触角测量仪对所得薄膜进行了表征测试,探究了不同比例的Gelatin和PVA对薄膜性能的影响。研究表明,随着两种聚合物比例的不同,薄膜性能差异较大。Gelatin和PVA的比例越大,薄膜的接触角越小,润湿性能也越好,并且所有样品的接触角均小于90°,说明薄膜具有良好的亲水性。随着Gelatin与PVA比例的增大,复合薄膜的厚度也逐渐增加,说明Gelatin的加入量决定了复合薄膜的厚度。 相似文献
2.
本文通过测定CF/PMR—15复合材料的层间剪切强度、拉伸强度和冲击强度,研究了碳纤维表面冷等离子体接技对其PMR—15复合材料界面的强度和韧性的影响,并讨论了CF/PMR—15断口形貌和断裂机制。 相似文献
3.
Mechanical Reinforcement and Piezoelectric Properties of PZT Ceramics Embedded with Nano-Crystalline
下载免费PDF全文
![点击此处可从《中国物理快报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The double-scale lead zirconate titanate (PZT) piezoelectric ceramics were prepared by the solid state processing with PZT nano-crystalline and micro-powder. The microstructures, electrical and mechanical properties of the double-scale PZT are investigated. All the sintered ceramics exhibit a single perovskite structure and the grain size of the dou ble-scale PZT reduces due to the incorporation of PZT nano-crystalline. Compared to normal PZT, the mechanical properties increase significantly and the piezoelectric properties decrease slightly. Mechanisms responsible for the reinforcement of the double-scale PZT are discussed. 相似文献
4.
利用旋涂法制备了一种PEO(聚环氧乙烷)和PVA(聚乙烯醇)的复合薄膜,通过金相显微镜、红外光谱和接触角测量仪对其性能迚行了测试。研究表明,当聚合物配比不同时,薄膜的形貌有较为明显的差异;而且,薄膜的接触角均较小,该复合材料表现出较好的润湿性。红外光谱的结果表明,两种聚合物之间有一定的化学键合,故薄膜的红外光谱发生了比较大的变化。 相似文献
5.
利用旋涂法制备一种PVA(聚乙烯醇)和PBC(聚碳酸丁二醇酯)的复合薄膜,通过金相显微镜、热重、红外光谱、接触角测量仪对所得薄膜进行表征测试,探究不同比例的PVA和PBC对薄膜性能的影响。研究表明,聚合物比例不同,薄膜表面形貌差别较大。PVA与PBC的比例越大,薄膜的接触角越小,润湿性能也越好。PVA和PBC间通过化学键形成分子间的缔合,两者比例不同对薄膜的失重情况并没有太大的影响。 相似文献
6.
采用溶胶—凝胶技术,以草酸铌为原料、乙二醇为酯化剂来制备钛酸锶(SrTiO3)掺杂铌酸钾钠(Na0.5K0.5)NbO3无铅压电陶瓷粉体。应用TG/DSC技术对干凝胶的成分及溶胶形成过程中的机理进行了研究,使用XRD和SEM对掺杂SrTiO3的纳米粉体进行了物相结构和表面形貌的表征,并研究了SrTiO3的最佳掺杂比例和烧结温度及其对压电性能的影响。 相似文献
7.
热塑性高分子薄膜蠕变模型的研究 总被引:2,自引:0,他引:2
在研究热塑性聚物变应力拉伸蠕变过程的基础上,应用BOLTZMANN原理对MAXWELL-VOIGT粘性模型进行了改进,建立新的蠕变模型及数据处理软件。实验证明此模型可以较好地应用于PVC薄膜拉伸蠕变试验研究中。 相似文献
8.
9.
为了提高基于NiTi纤维与树脂复合材料的拉伸、冲击、弯曲性能,采用硝酸、硅烷偶联剂、异氰酸酯涂层以及低温等离子体与硅烷偶联剂联合处理等方法对NiTi纤维表面进行处理,增强纤维与树脂间的界面黏结. 研究表明: NiTi纤维经不同方法处理后,其环氧树脂复合材料的层间剪切强度提高了10.90%~44.74%. 低温等离子体处理的NiTi纤维再经硅烷处理,其环氧树脂复合材料的拉伸性能、冲击性能、弯曲性能分别提高了88.81%, 98.43%和45.55%,且纤维与树脂黏合较好. 相似文献
10.
Structural and electrical properties of Nd ion modified lead zirconate titanate nanopowders and ceramics
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
A modified sol-gel method is used for synthesizing Nd ion doped
lead zirconate titanate nanopowders Pb1 - 3x/2NdxZr0.52Ti0.48O3 (PNZT) in an ethylene
glycol system with zirconium nitrate as zirconium source. The
results show that it is critical to add lead acetate after the
reaction of zirconium nitrate with tetrabutyl titanate in the
ethylene glycol system for preparing PNZT with an exact fraction of
titanium content. It has been observed that the dopant of excess Nd
ions can effectively improve the sintered densification and activity
of the PNZT ceramics. Piezoelectric, dielectric and ferroelectric
properties of the PNZT ceramics are remarkably enhanced as compared
with those of monolithic lead zirconate titanate (PZT).
Especially, the supreme values of piezoelectric constant (d33)
and dielectric constant (\it ε) for the PNZT are both
about two times that of the monolithic PZT and moreover, the remnant
polarization (Pr) also increases by 30%. According to
the analysis of the structures and properties, we attribute the
improvement in electrical properties to the lead vacancies caused by
the doping of Nd ions. 相似文献