排序方式: 共有21条查询结果,搜索用时 31 毫秒
1.
2.
Anomalous behavior and phase transformation of α-GaOOH nanocrystals under static compression 下载免费PDF全文
The structural compression mechanism and compressibility of gallium oxyhydroxide, α-GaOOH, are investigated by in situ synchrotron radiation x-ray diffraction at pressures up to 31.0 GPa by using the diamond anvil cell technique. Theα-GaOOH sustains its orthorhombic structure when the pressure is lower than 23.8 GPa. The compression is anisotropic under hydrostatic conditions, with the a-axis being most compressible. The compression proceeds mainly by shrinkage of the void channels formed by the coordination GaO_3(OH)_3 octahedra of the crystal structure. Anomaly is found in the compression behavior to occur at 14.6GPa, which is concomitant with the equatorial distortion of the GaO_3(OH)_3 octahedra. A kink occurs at 14.6 GPa in the plot of finite strain f versus normalized stress F, indicating the change in the bulk compression behavior. The fittings of a second order Birch–Murnaghan equation of state to the P–V data in different pressure ranges result in the bulk moduli B_0= 199(1) GPa for P 14.6 GPa and B_0= 167(2) GPa for P 14.6 GPa. As the pressure is increased to about 25.8 GPa, a first-order phase transformation takes place, which is evidenced by the abrupt decrease in the unit cell volume and b and c lattice parameters. 相似文献
3.
The photoluminescence(PL) properties of Y2O3:Eu3+nanophosphors were systematically investigated with the goal of improving the color quality and quantum efficiency of Y2O3:Eu3+nanophosphors for potential applications in nanoscale devices. The emission spectra, excitation spectra and fluorescence decay curves were employed to trace the energy transfer process from Eu3+at C3isite to Eu3+at C2site. The experimental results show that the energy transfer process becomes more and more efficient with the increase in the Eu3+concentration. The emission of Eu3+at C2site is favorable because it has high radiative efficiency and better color quality. The successful suppress of the emission Eu3+at C3iis especially important for its applications in general illumination or display technology. The quantum efficiency and color quality of Y2O3:Eu3+can be improved by controlling the energy transfer between the Eu3+at S6site and Eu3+at C2site. 相似文献
4.
铜经BTA和MBT钝化处理后在NaCl溶液中电化学行为分析 总被引:1,自引:0,他引:1
采用电化学极化曲线、循环伏安曲线和电化学阻抗谱研究铜经苯并三氮唑(BTA)和2-巯基苯并噻唑(MBT)钝化处理后在3.5%NaCl溶液中的电化学行为.两者复配使用增强对铜电极的阳极和阴极电化学过程的抑制作用,增大了膜电阻,从而具有较好的缓蚀协同效应.并通过扫描电镜观察,直观地表征出BTA和MBT的复配增强对铜腐蚀的抑制作用. 相似文献
5.
利用原位高压同步辐射X射线衍射方法,对尺寸为11 nm的CaF2纳米晶粒进行高压结构相变和压缩特性研究。当压力为12 GPa时,观察到由萤石结构向α-PbCl2结构转变的一次相变,该相变压力点远高于体材料,但略低于粒径更小的CaF2纳米晶体。相比体材料,纳米尺寸的CaF2样品的体弹模量更大,说明其更难被压缩。当压力释放至常压时,11 nm的CaF2纳米晶粒的α-PbCl2型亚稳相结构被保留下来,相变不可逆。分析了影响11 nm CaF2纳米晶粒独特高压行为的原因,判定尺寸效应为主要因素,该尺寸下较高的表面能导致结构稳定性增强和体积模量增加。 相似文献
6.
采用高压拉曼实验技术和高压同步辐射技术对氟化锶的高压相变及卸压过程进行研究.两种传压介质下的高压拉曼和高压同步辐射实验结果表明,氟化锶在5~6 GPa会发生由立方相到正交相的结构相变.在卸压过程中相变具有较强的滞后性,这是由氟化锶的自身属性决定的,与实验选择的传压介质无关.当样品卸至常压后,当氟化锶内部的残余应力完全释放后其相变是可逆的.该结果为进一步研究其它碱土金属氟化物的高压相变和物理性质提供了重要的实验依据. 相似文献
7.
目的 预测中国建筑行业碳达峰年限和减排潜力,明确超低或近零能耗建筑在推动建筑行业节能降碳方面的贡献,助力我国实现双碳目标。方法 通过文献查阅和实地调研,获得不同建筑类型全生命周期碳排放特征;基于建筑面积和不同能效等级建筑碳排放强度自下而上建立建筑行业运行过程碳排放计算模型,并根据不同建筑类型未来发展情况设置4种情景,预测建筑行业未来40年建筑碳排放情况。结果 随着建筑能效等级提升,建材生产阶段二氧化碳排放占全生命周期二氧化碳排放比例越来越大,而运行阶段占比相反;绿色建筑全生命周期二氧化碳排放量比普通建筑减少了20.0%左右,超低和近零能耗建筑全生命周期二氧化碳排放量相比普通建筑约减少了56.0%。随着绿色建筑和超低或近零能耗建筑发展时间提前,占比越来越大,建筑行业的达峰年限逐渐提前,峰值也逐渐降低;中速情景下建筑行业2030年达峰,二氧化碳排放峰值为26.44亿t;预测到2060年,低速、中速和高速情景下二氧化碳排放量分别比基准情景降低23.2%、29.7%和45.1%左右。结论 大力发展超低+近零能耗建筑对于推动建筑行业节能降碳具有重要作用。 相似文献
8.
用溶胶凝胶法对天然石墨(NG)进行表面改性处理,即在NG表面形成Li4Ti5O12(LTO)纳米球包覆层,并对其电性能进行了研究。分析表明,LTO纳米球在石墨表面单分散均匀分布,粒径为50-150 nm。此表面改性,提高了NG的首次效率及克容量,分别为1.4%和37.9 mAh/g;全电池测试结果发现,LTO改性后,在2.4-2.8 V之间的副反应明显减少,即石墨表面结构破坏减少、不可逆容量减少,从而提高了首次效率及克容量。 相似文献
9.
以手性色谱柱为分离柱,串联蒸发光散射检测器(ESLD),采用反相高效液相色谱法测定普瑞巴林原料药中普瑞巴林R-异构体的含量。色谱条件如下:CHIRALPAK ZWIX(+)(4.0mm×150mm,3μm)为手性分离柱,柱温为25℃;甲醇-乙腈-水-甲酸-二乙胺(450+450+100+2.0+2.5)为流动相,流量为0.5 mL·min^(-1);ESLD漂移管温度为70℃,载气流量为2.0L·min^(-1)。普瑞巴林R-对映异构体的线性范围为0.80~4.5mg·L^(-1),检出限为0.30mg·L^(-1),测定下限为0.80mg·L^(-1)。加标回收率为93.8%~94.5%,测定值的相对标准偏差(n=6)小于2.5%。 相似文献
10.
针对传统脱离率模型低估自动驾驶路测车辆驾驶能力问题,提出了避险脱离与非避险脱离概念,通过秩和检验确定脱离时长阈值,选取平均速度差、短时平均速度差、瞬时速度差为特征值,量化车辆脱离前后行为差异,利用无监督学习K-means算法辨别避险与非避险脱离类型,构建面向自动驾驶路测驾驶能力评估的避险脱离率模型。基于上海市城市道路和快速路两类场景路测数据,验证避险脱离率模型的合理性与有效性。结果表明,基于避险脱离率模型,自动驾驶路测车辆驾驶能力在城市道路与快速路场景中,分别比传统脱离率模型平均提升了4.8和7.3倍。 相似文献