火焰加热温度对6005A铝合金焊接接头性能的影响

针对铁路交通车辆用 60 0 5A铝合金型材的焊接变形 ,采用火焰加热方法进行矫正·研究了火焰加热温度对焊接接头抗拉强度、硬度及微观组织结构的影响·实验结果表明 ,当加热温度低于 2 0 0℃时 ,焊接接头的抗拉强度、硬度未降低 ,热影响区内软化区的显微组织未发生明显变化 ;当加热温度超过 2 0 0℃时 ,焊接接头的硬度发生较明显降低现象 ,软化区范围加宽·软化区材料性能下降的原因是在火焰加热的热输入过程中过热导致该区晶粒粗大     

Modelling of spreading process: effect from hydrogen bonds

Lubricant spreading on solid substrates has drawn considerable attention not only for the microscopic wetting theory but also for the dramatic application in head-disk interface of magnetic storage drive systems. Molecular dynamic simulation based on a coarse-grained bead-spring model has been used to study such a spreading process. The spreading profiles indicate that the hydrogen bonds among lubricant molecules and the hydrogen bonds between lubricant molecules and polar atoms of solid substrates will complicate the spreading process in a tremendous degree. The hydrogen bonds among lubricant molecules will strengthen the lubricant combination intensity, which may hinder most molecules from flowing down to the substrates and diffusing along the substrates. And the hydrogen bonds between lubricant molecules and polar atoms of solid substrates will confine the lubricant molecules around polar atoms, which may hinder the molecules from diffusing along the substrates and cause precursor film to vanish.     

Ultrafast dynamics of three types of simultaneous shockwaves and filament attenuation in femtosecond laser multi-pulse ablation of PMMA

Cylindrical shockwaves inside polymethyl methacrylate(PMMA) generated simultaneously with two hemispherical shockwaves induced by a femtosecond Gaussian beam laser were investigated using an ultrafast pump–probe imaging technique. The evolutions of these three shockwaves with probe delay and incident pulse number have been systematically analyzed. The plasma intensity and filament length in the center of cylindrical shockwave both decayed with pulse number. Moreover, the self-focused filament moved downstream towards the output surface with an increased pulse number. The experimental results and mechanism illustrated that energy deposition was suppressed by a degraded nonlinear effect due to a pre-ablated structure in multi-pulse irradiation.     

High-temperature reflective sensor based on single fusion-splicing f iber taper without coating

A high temperature sensor based on an ultra-abrupt tapered fiber Michelson interferometer fabricated by the fusion-splicing method is proposed. The sensor consists of a single abrupt taper and the cleaved surface is used as the reflection mirror. The thermal characteristic is investigated at 25 to 1 000℃. The sensitivity of the sensor is observed to vary with the temperature, that is, 25 and 78 pm/℃ at 25-300 and 300-1 000℃, respectively. The Michelson interferometer sensors have the advantages of simple structure, cost effectiveness, compactness, and simple fabrication process.     

飞秒激光微通道加工研究进展

综述了基于飞秒激光微通道制造的研究现状,包括加工机理、工艺技术方面的研究进展,重点介绍了飞秒激光改性辅助化学刻蚀和液体辅助飞秒激光烧蚀两大主要制造方法上的研究成果,概述了目前面临的主要问题与挑战,展望了未来的发展趋势.     

Selective triggering of phase change in dielectrics by femtosecond pulse trains based on electron dynamics control

In this study we experimentally reveal that the phase change mechanism can be selectively triggered by shaping femtosecond pulse trains based on electron dynamics control (EDC), including manipulation of excitations, ionizations, densities, and temperatures of electrons. By designing the pulse energy distribution to adjust the absorptions, excitations, ionizations, and recombinations of electrons, the dominant phase change mechanism experiences transition from nonthermal to thermal process. This phenomenon is observed in quadruple, triple, and double pulses per train ablation of fused silica separately. This opens up possibilities for controlling phase change mechanisms by EDC, which is of great significance in laser processing of dielectrics and fabrication of integrated nano- and micro-optical devices.     

Femtosecond Bessel-beam-assisted high-aspect-ratio microgroove fabrication in fused silica

A simple and repeatable method to fabricate high-aspect-ratio(HAR) and high-quality microgrooves in silica is reported. The method consists of two steps:(1) formation of laser-modified regions by femtosecond Bessel beam irradiation, and(2) removing laser-modified regions through HF etching. Uniform, straight microgrooves can be fabricated and the highest aspect ratio that can be reached is ～52. The phenomenon is attributed to the uniform energy distribution in the long propagation distance, which leads to the long and uniform laser-modified regions and subsequent HF acid etching of laser-modified regions with high selectivity. This method will have potential applications in fabrication of HAR microgrooves in transparent materials.     

Ethanol-assisted ablation of silicon and germanium by temporally shaped femtosecond pulses

A surprising phenomenon can be discovered by using femtosecond double-pulse ablation of silicon and germanium in ethanol. The ablation areas present an oscillation increase phenomenon when the pulse delay increases from 200 fs to 1 ps in the fluence range of 0.5–0.6 J∕cm2. In contrast, the ablation areas exhibit an oscillation decrease phenomenon as the pulse delay increases when the laser fluence F 0.5 J∕cm2, which is consistent with the results of the experiment in air. It is considered that the adjustment of the photon–electron coupling efficiency by pulse train technology plays an important role in the ablation process.     

Fiber inline interferometric refractive index sensors fabricated by femtosecond laser and fusion splicing

A fiber inline interferometric refractive index （RI） sensor consisting of a microchannel and a fiber taper is proposed in this letter. The microchannel is fabricated by combining femtosecond laser micromachining and arc fusion splicing. No subsequent chemical etching process is needed. Three sensors with microchannel widths of 4, 8, and 10 μm are prepared. The sensitivity in the RI range from 1.33 to 1.35 is up to -361.29 nm/RIU at the microchannel width of 8 μm. The sensitivity is -20 times greater than that of the paired taper-based MZI sensors and long period fiber grating pair MZI sensors.