QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

长江三角洲创建农业高新技术产业化基地若干问题的探讨

在长江三角洲地区创建农业高新技术产业化基地，对于加快发展农业高新技术产业，促进农业现代化，推进地区性乃至全国性农村小康建设的进程，有着重大的意义。一个综合性的农业高新技术产业化基地，应该具备农业高新技术产品研发与生产、企业孵化、应用示范、培训、推广和服务等多项功能。昆山和南京可能是建立农业高新技术产业化基地最有利的城市。     

用豆腐渣加工粉末蛋白食品

营养丰富的豆腐渣,因有异味和保存性差,目前还没有得到很好的利用。现介绍一种方法,即豆腐渣通过水、脂肪水解酶及蛋白质水解酶的处理,再经干燥制成多纤维、低热量、易保存、无味、无嗅的粉末状蛋白食品,可添加到糕点等食品中。     

Hydrostatic settling velocity of sediments

The settling of sediments is an accelerative process in which the concentration of the main sediments zone will heavily influence settling velocity, but the explicit relationship between the concentration and settling velocity has not been reported in literature. Here a theoretical function was built for the time dependent concentration and time dependent settling velocity of sediments ; then the entire settling process reflecting concentration was shown on the basis of sediments instant-settlement theory and mathematical method. Agreement of computed results and experimental data was found. Several governing parameters, including particle size,particle density,inltial suspended sediments concentration and suspension height, were discussed with a series of calculated velocity curves. The research indicated that (1) the presented concentration-velocity time relationship is rational, (2) settling process of the sediments group with variation of concentration consists of acceleration stage, uniform motion stage and deceleration stage, and (3) particle size, particle density and initial suspended sediments concentration have more influence on the settling velocity than the suspension height and water temperature.     

Photoluminescence Characterization of Silicon Nanoparticles Hybridized Europium Complex

A europium complex Eu (DBM)3 TPPO (Eu tris(benzoylmethide)-(triphenylphosphine oxide)) and silicon nanoparticles have been hybridized.The hybridization can evidently change the photoluminescence (PL) characteristics of the Eu complex in the following aspects:under an excitation of 390nm,the intensity of the PL peak at 611nm due to the ^5Du-^7F2 transition of the Eu^3 ions has been increased by 30%,and thc integrated PL intensity in the visible range has been increased by nearly 3 times;the PL excitation efficiency beyond 440nm has been improved cvidently;the peak in the PL excitation spectrum shifts from 408nm to 388nm,and the PL decay time decreases from 2.07 to 0.96μs,The experimental results indicatde that in the PL process,the photoexcited energy may transfer from the silicon nanoparticlcs to the Eu^3 ions.     

扩张代数的recollement

A是任意域k上的有限维代数. 证明了: 若无界导出模范畴D^-(Mod-A) 允许有关于有限维k-代数B和C的无界导出模范畴 D^-(Mod-B) 和D^-(Mod-C) 的对称的recollement 则A的平凡扩张代数T(A)的无界导出模范畴 也允许有如下对称的recollement:     

林群院士简介

林群，男，1935年7月生人，原籍福建省福州（连江），中国科学院院士，中国科学院数学与系统科学研究院研究员，博士生导师，1999年当选第三世界科学院院士，第九、十届全国人大代表。林群院士1956年毕业于厦门大学数学系，是我国泛函分析、计算数学研究领域著名的数学家。20世纪70年代以来，他在对微分方程求解的加速理论的研究中，取得了一系列卓越的成果，形成了系统理论，被国内外同行公认为是“开创性的工作”，并被列为“当今最有希望的3种加速理论之一”。     

硫化态K—MoO3／γ—Al2O3催化剂表面物种的XPS研究

采用Ｘ光光电子能谱及曲线氦合手段对硫化态Ｋ－ＭｏＯ３／Ａｌ２Ｏ３合成醇催化剂进行了研究，分别考察负载量及硫化前不同条件预处理对催化剂表面的Ｓ、Ｍｏ组分的物种形式及各物种相对含量的影响，以及表面不同组分的相对组成。结果表明，根据其电子结合能变化，Ｓ组分可区分为ＳＯ＾２－４、ＳＯ３、Ｓ＾０、ＭｏＳ２、ＭｏＳ２－ｘ等六种存在形式不同的物种；Ｍｏ组分可分为Ｍｏ＾６＋、Ｍｏ＾５＋、ＭｏＳ＾２＋、ＭｏＳ２、Ｍ     

LIQUID CHLOROPRENE-HYDROXYETHYL METHACRYLATE COPOLYMER MODIFIED EPOXY RESIN Ⅱ. N, N-DIMETHYL BENZYL AMINE CURING SYSTEM

A series of liquid chloroprene-hydroxyethyl methacrylate copolymer (CP-HEMA) modifiedepoxy resin were prepared. The effects of CP-HEMA content, curing conditions on physical pro-perties of the modified system were examined. With IR and Viscoelastocuremeter, the curing reactionrate was determined and the mechanism of the curing reaction was discussed. The effects of CP-HEMA content and curing conditions on morphology were mainly observed by scanning electronmicroscopy.