239Pa可能对天体物理研究产生一点影响

扼要介绍利用重计时对的核宇宙年代学来进行宇宙年龄估计的方法. 简单叙述²³⁹Pa的异常长的半衰期对于宇宙年龄估计的影响.     

对硝基甲苯合成3,4-二甲基苯胺的研究

以对硝基甲苯为原料,经胺甲基化、水解、还原3步反应合成了目标化合物。通过单因素实验,分析每一步反应的关键影响因素,初步得到适宜的合成条件。最终产物的结构经核磁氢谱、质谱、元素分析进行确证,纯度经气相色谱分析。3,4-二甲基苯胺的总收率56.6%,纯度大于98.5%。该合成路线原料易得,成本较低,操作简单。     

重丰中子核的一种特性

重丰中子核具有一种特殊的衰变性质,即β-延发裂变。简单介绍这一衰变模式的基本过程,指出了它的研究意义和研究现状,扼要叙述我们的进展情况。     

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮从硝酸介质中萃取钪

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)做萃取剂研究了从HNO3介质中痕量钪的溶剂萃取行为。发现在很低的酸度下,PMBP几乎可以定量地萃取痕量的钪。同时,也讨论了用PMBP从^18O离子辐照过的铀靶溶液中萃取分离钍时钪的沾污。     

关于重丰中子远离核研究的实验方法

简单地介绍了重丰中子远离核研究的科学意义,报告了重丰中子新核素的产生、分离和鉴别方法。     

液-液萃取从Th中分离Ac

用234Th、228Ac和139Ce 3做示踪剂,二(2-乙基己基)磷酸做萃取剂,研究了初始HNO3浓度对234Th、228Ac和139Ce 3萃取效率的影响。发现在广泛的酸度范围内,234Th均能被定量地萃取;当HNO3浓度大于2.0mol/L时,228Ac和139Ce3 的萃取效率下降到2%以下。研究了震荡时间对234Th萃取效率的影响,数据显示,1min便可达到萃取平衡。从含大量钍的溶液中分离痕量Ac的实验结果显示,用二(2-乙基己基)磷酸-苯的萃取流程,可使Ac与大量的钍分离,同时Ac的损失又较小。     

用二-2-乙基己基磷酸和P2O5混合物从硝酸溶液中萃取Am（Ⅲ）

用二-2-乙基己基磷酸（HDEHP）和P2O5混合物做萃取剂^241 Am^3＋为示踪剂,做了从硝酸溶液中液-液萃取Am的实验研究。完成了硝酸浓度和震荡时间的变化影响^241 Am^3＋萃取效率的条件实验。发现P20,的浓度≥0．0125mol／L时,^241 Am^3＋ 的萃取效率大干98％;震荡时间≥30s,两相便可达到萃取平衡。分别用二乙撑三胺五乙酸（DTPA）-乳酸以及N％CO3溶液对^241 Am^3＋进行反萃取。结果显示N％CO,溶液能给出很高的反萃效率。而且,在很短的震荡时间内,两相都能达到反萃平衡。     

266Bh的α衰变性质研究(英文)

报道了利用兰州重离子研究装置提供的26Mg重离子束流轰击243Am靶产生和鉴别已知超重核素266Bh的实验结果。利用转轮收集探测装置依靠母子核遗传关系通过观测Bh同位素与其子核Db和Lr之间的α-α关联事件来鉴别266Bh。实验中观测到266Bh的α能量为（9.03 ± 0.08）MeV, 与日本理化学研究所在合成113号元素中第一个衰变链中观测到266Bh的α能量为9.07 MeV相近。 266Bh的半衰期为0.66+0.59-0.26 s, 从实验得到的Qα也符合Z=107的Qα随中子数变化的系统性。The isotope of 266Bh was produced and identified definitely in bombardments of 243Am target with 162 MeV 26Mg ions at HIRFL. Identification was made by observation of correlated α particle decays between the Bh isotopes and their Db and Lr daughters using a rotating wheel system. The measured α energy for 266Bh is (9.03±0.08) MeV, and this value close to the 9.07 MeV for 266Bh observed in the first chain of element 113 at RIKEN. The half life of 266Bh is 0.66+0.59 -0.26 s. The Qα value derived from this experiment fits well into the general trend in a “Qα N systematics” for the isotopes with Z = 107.     

粘红酵母对铀的吸附研究

研究了粘红酵母对水溶液中铀的吸附行为,发现其吸附铀的最佳pH值为6～7,最大吸附量为149.4 mgU·g-1,其吸附等温线和Langmuir吸附等温方程符合较好,相关系数R-2达到0.99;比较吸附铀前后牯红酵母的红外光谱图发现,吸附过铀的菌体的红外光谱在904cm-1处出现了一个新的峰,此峰为UO2的伸缩振动峰,说明粘红酵母确实对铀发生了吸附作用.此外,氨基或羟基的伸缩振动峰由3 309移至3 287cm-1,细胞壁中碳水化合物或醇中C-O键伸缩振动发生位移,由1 068移至1 080cm-1,说明这些基团可能参与了吸附过程;蛋白质的特征吸收峰(1 653,1 540,1 237cm-1)在吸附前后基本无明显变化,表明粘红酵母的主要成分及结构仍保持完整.吸附后的菌体利用0.1 mol·L-1的NaHCO3处理后可解吸出其中96%的铀,可见该菌在铀矿废水处理方面具有广阔的应用前景.     

铀矿坑水样中铀电沉积层的表征

描述了硫酸铵溶液中铀矿坑水样品中铀的电沉积层特性。 电沉积液为10 ml 0.8 M的硫酸铵溶液, 电流密度0.6 A/cm2, pH值为2.5, 电镀1 h。 电沉积经化学分离后的水样品和电沉积的纯硝酸铀酰样品进行了比较, 并对二者分别做了红外(IR)光谱、 扫描电镜(SEM)、 元素分析以及α能谱测量。 IR谱上铀酰离子的反对称伸缩振动峰在887 cm-1附近, 使电沉积在不锈钢片上的铀主要以铀酰离子水合物的形式存在, 有一部分NH+4以NH3的形式替代水合物中的水, 使电沉积层中铀的化合物形式为UO2(OH)2·xNH3·yH2O或者UO2(OH)2-x·(ONH4)x·yH2O, 铀酰离子通过链的形式形成聚合结构。 SEM照片显示电沉积层均匀, 没堆积成团现象出现。 α谱表明电沉积层中铀的同位素主要是238U和234U, 相应的α能量峰4198和4773 keV很显著, 没其它峰的干扰。 Characteristics of electrodeposited uranium films of uranium ore water sample in ammonium sulphate was investigated in this work. The optimized electrodeposited conditions were as follows: electrolyte was ammonium sulphate of 0.8 M, and current density at the cathode was 0.6 A/cm2, electrolyte pH value was 2.5, the time of plating on the electrodeposition was 1 h. In this situation, the uniform, thin and adheresive films were produced by electrodeposition method. Two samples were made, one electrodeposition of pure uranyl nitrate, and another electrodeposition of uranium ore water sample after chemical separation. Characteristics of electrodeposited uranium films of uranium ore water sample after chemical separation was studied, making comparisons with electrodeposited films of uranyl nitrate. The analysis of film characteristics was done through infrared (IR) spectrum, scanning electron microscopy(SEM), element analysis and α spectrum measurment. According to Fourier transform infrared spectra, the asymmetric stretching vibration band of uranyl group is around 887 cm-1. In addition, according to IR spectrum, we know that uranium exists mainly as the form of hydrated polymeric compound in the film. Electrodeposited uranium films also included many NH+4. Polymeric structures of variable composition were present in the electrodeposited samples, with the unit monomeric formula UO2(OH)2·xNH3·yH2O or UO2(OH)2-x·(ONH4)x·yH2O. Scanning electron microscopy shows that the two samples have similar surface characteristics and no cluster is observed. The samples were also measured by spectrometer equipped with Passivated Implanted Planar Silicon(PIPS) detector. From the α spectrum, we know that isotopes of uranium in the film are 238U and 234U. 235U is not found in the α spectrum. It also shows that the chemical separation process can isolate uranium from other interfering elements effectively, the result of chemical separation is very satisfactory and electrodeposited process is rather efficient. Source electrodeposited in ammonium sulphate through optimized conditions satisfies the need of high resolution α spectrum.