Challenges in validating the sterilisation dose for processed human amniotic membranes

Most of the tissue banks in the Asia Pacific region have been using ionising radiation at 25 kGy to sterilise human tissues for save clinical usage. Under tissue banking quality system, any dose employed for sterilisation has to be validated and the validation exercise has to be a part of quality document. Tissue grafts, unlike medical items, are not produced in large number per each processing batch and tissues relatively have a different microbial population. A Code of Practice established by the International Atomic Energy Agency (IAEA) in 2004 offers several validation methods using smaller number of samples compared to ISO 11137 (1995), which is meant for medical products. The methods emphasise on bioburden determination, followed by sterility test on samples after they were exposed to verification dose for attaining of sterility assurance level (SAL) of 10⁻¹. This paper describes our experience in using the IAEA Code of Practice in conducting the validation exercise for substantiating 25 kGy as sterilisation dose for both air-dried amnion and those preserved in 99% glycerol.     

Synthesis and characterization of adducts of dichlorosulphato bis(1,3-propylenediamine)metal(II) complexes with dialkyltin dichlorides

Summary Adducts of dichlorosulphato bis(1,3-propylenediamine)-metal(II) complexes with dialkyltin dichlorides, [R₂Sn(MeCN) ₂]₂[M(NH(CH₂)₃NH)₂(SO₃Cl)₂] (M = Cr, Fe, Co, Ni or Cu; R = Me or n-Bu) have been prepared. The positive shift in the symmetric SO₃ stretch and splitting of the doubly degenerate (E) modes in their i.r. spectra suggest a covalent linkage for the SO₃Cl^– group. The adducts are non-electrolytes; magnetic moments and ligand field data suggest that each SO₃Cl^– group is monodentate, generating an octahedral geometry around the metal ions, except for Ni^II where tetragonal distortion is observed.Author to whom all correspondence should be directed.     

Ethylenediamine complexes of transition metalbis(chlorosulphates)

Summary The number and positions of the i.r. active modes in ethylenediamine complexes of M(SO₃Cl)₂ (M = Mn, Fe, Co, Ni or Cu) suggest that the SO₃Cl^– anion is covalently bound in these non-electrolytic complexes. Magnetic moments and ligand field data suggest that each SO₃Cl^– group is monodentate, giving an octahedral geometry around the metal ions.     

Adsorption of cationic methylene blue dye using microwave-assisted activated carbon derived from acacia wood: Optimization and batch studies

This study assesses the performance of optimized acacia wood-based activated carbon (AWAC) as an adsorbent for methylene blue (MB) dye removal in aqueous solution. AWAC was prepared via a physicochemical activation process that consists of potassium hydroxide (KOH) treatment, followed by carbon dioxide (CO₂) gasification under microwave heating. By using response surface methodology (RSM), the optimum preparation conditions of radiation power, radiation time, and KOH-impregnation ratio (IR) were determined to be 360 W, 4.50 min, and 0.90 g/g respectively, which resulted in 81.20 mg/g of MB dye removal and 27.96% of AWAC’s yield. Radiation power and IR had a major effect on MB dye removal while radiation power and radiation time caused the greatest impact on AWAC’s yield. BET surface area, mesopore surface area, and pore volume of optimized AWAC were found to be 1045.56 m²/g, 689.77 m²/g, and 0.54 cm³/g, respectively. Adsorption of MB onto AWAC followed Langmuir and pseudo-second order for isotherm and kinetic studies respectively, with a Langmuir monolayer adsorption capacity of 338.29 mg/g. Mechanism studies revealed that the adsorption process was controlled by film diffusion mechanism and indicated to be thermodynamically exothermic in nature.     

Hamel’s paradox and the foundations of analytical dynamics

This paper deals with an explanation of a paradox posed by Hamel in his 1949 book on Theoretical Mechanics. The explanation deals with the foundations of mechanics and points to new insights into analytical dynamics.     

Improved Spectral Coverage and Fluorescence Quenching in Donor–acceptor Systems Involving Indolo[3‐2‐b]carbazole and Boron‐dipyrromethene or Diketopyrrolopyrrole

A novel π‐conjugated triad and a polymer incorporating indolo[3,2‐b]‐carbazole (ICZ) and 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) were synthesized via a Sonogashira coupling. Compared to the parent BODIPY the absorption and fluorescence spectrum were for both compounds broader and redshifted. The redshift of the fluorescence and the decrease of the fluorescence quantum yield and decay time upon increasing solvent polarity were attributed to the formation of a partial charge‐transfer state. Upon excitation in the ICZ absorption band the ICZ fluorescence was quenched in both compounds mainly due to energy transfer to the BODIPY moiety. In a similar ICZ–π–DPP polymer (where DPP is diketopyrrolopyrrole), a smaller redshift of the absorption and fluorescence spectra compared to the parent DPP was observed. A less efficient quenching of the ICZ fluorescence in the ICZ–π–DPP polymer could be related to the unfavorable orientation of the transition dipoles of ICZ and DPP. The rate constant for energy transfer was for all compounds an order of magnitude smaller than predicted by Förster theory. While in a solid film of the triad a further redshift of the absorption maximum of nearly 100 nm was observed, no such shift was observed for the ICZ–π–BODIPY polymer.     

Equations of motion for mechanical systems: A unified approach

This paper presents a unified framework from which emerge the Lagrange equations, the Gibbs-Appell Equations and the Generalized Inverse Equations for describing the motion of constrained mechanical systems. The unified approach extends the applicability of the first two approaches to systems where the constraints are non-linear functions of the generalized velocities and are not necessarily independent. Furthermore, the approach leads to the Explicit Gibbs-Appell Equations.     

State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers

Journal of Thermal Analysis and Calorimetry - The need for better thermal–hydraulic performance of heat exchangers remains the primary reason for further improving the design of heat...     

Targeted Delivery of Anesthetic Agents to Bone Tissues using Conductive Microneedles Enhanced Iontophoresis for Painless Dental Anesthesia

Pain management during dental procedures is a cornerstone for successful daily practice. In current practice, the traditional needle and syringe injection is used to administer local anesthesia. However, the appearance of long needles and the pain associated with it often leads to dental anxiety deterring timely interventions. Microneedles (MNs) have emerged as a minimally invasive alternative to hypodermic needles and shown to be effective in transdermal drug delivery applications. In this article, the potential use of MNs for local anesthesia delivery in dentistry is explored. The development of a novel conductive MN array that can be used in combination with iontophoresis technique to achieve drug penetration through the oral mucosa and the underlying bone tissue is presented. The conductive MN array plays a dual-role, creating micro-conduits and lowering the resistance of the oral mucosa. The reduced tissue resistance further enhances the application of a low-voltage current that is able to direct and accelerate the drug molecules to target the sensory nerves supplying teeth. The successful delivery of lidocaine using this new strategy in a clinically relevant rabbit incisor model is shown to be as effective as the current gold standard.