A Novel Self-Organizing Approach to Automatic Traffic Light Management System for Road Traffic Network

Wireless Personal Communications - Traffic network is basically a “network of networks” consisting of mainly two types of networks: road network and a travel network. Due to drastic...     

Constructing ‘hair’ for the three charge hole

It has been found that the states of the 2-charge extremal D1–D5 system are given by smooth geometries that have no singularity and no horizon individually, but a ‘horizon’ does arise after ‘coarse-graining’. To see how this concept extends to the 3-charge extremal system, we construct a perturbation on the D1–D5 geometry that carries one unit of momentum charge P. The perturbation is found to be regular everywhere and normalizable, so we conclude that at least this state of the 3-charge system behaves like the 2-charge states. The solution is constructed by matching (to several orders) solutions in the inner and outer regions of the geometry. We conjecture the general form of ‘hair’ expected for the 3-charge system, and the nature of the interior of black holes in general.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

Synthesis of Novel Nucleic Acid Mimics via the Stereoselective Intermolecular Radical Coupling of 3'-Iodo Nucleosides and Formaldoximes(1)

A highly convergent free radical coupling of alkyl iodides and oximes, mediated by bis(trimethylstannyl) benzopinacolate (8), has been utilized to prepare a series of dimeric nucleosides as mimics of natural nucleic acids. The systematic optimization of the reaction conditions allowed for the single-step conversion of the appropriate iodides and oximes into the 2'-deoxy dimers 9 in moderate to excellent yields. For example, the reaction of 3'-deoxy-3'-iodo-5'-(triphenylmethyl)thymidine (6a) with 3'-O-(tert-butyldiphenylsilyl)-5'-O-(methyleneimino)thymidine (7a) in the presence of 8 in degassed benzene gave an 81% yield of 3'-de(oxyphosphinico)-3'-(methyleneimino)-5'-O-(triphenylmethyl)thymidylyl-(3'-->5')-3'-O-(tert-butyldiphenylsilyl)thymidine (9a). Similarly prepared were dimers containing both pyrimidine (thymine, 5-methylcytosine) and purine (adenine, guanine) bases. The reaction was highly stereoselective, giving only a single dimeric species having the ribo-configuration of the newly introduced C-3'-branched methylene moiety. Also prepared were dimers 16, incorporating 2'-O-methyl ribonucleosides in both halves of the dimer. This required the synthesis of 3'-deoxy-3'-iodo-2'-O-methyl nucleosides 12 as well as 2'-O-methyl-5'-O-methyleneimino nucleosides 15. For example, 5'-O-(tert-butyldiphenylsilyl)-3'-deoxy-3'-iodo-2'-O-methyl-5-methyluridine (12e) was prepared in 80% yield by displacement of the corresponding triflate with Bu(4)NI. Also prepared were the suitably protected 3'-deoxy-3'-iodo adenosine and guanosine derivatives. Compounds 15 were prepared in high yield by a regioselective Mitsunobu reaction to give the corresponding 5'-O-phthalimido nucleosides 13, which were subsequently converted to the requisite oximes 15. In the 2'-O-methyl series, the pinacolate coupling reaction proceeded with efficiency equal to that observed for the 2'-deoxy series 9, but with slightly less stereoselectivity, giving predominantly the C-3'ribo products 16, contaminated with 5-25% of the epimeric material. Mixed base dimers containing both pyrimidine and purine bases at all possible positions, including purine-purine dimers were prepared. The hydroxylamine or methyleneimino (MI) backbone of several representative dimers so prepared was converted via methylation to give the corresponding methylenemethylimino (MMI)-linked compounds, which are novel phosphate surrogates for use in antisense oligonucleotides.     

Nonlinear dynamics of confined polymer melts with attractive walls

A scaling model is presented to analyze the reversible strain-hardening phenomenon in end-tethered polymer clay nanocomposites (Krishnamoorti, R.; Giannelis, E. P. Langmuir 2001, 17, 1448). It is assumed that for attractive clay-polymer interactions a fraction of the polymer chains that span the space between opposite clay plates get adsorbed on them, thereby bridging the plates. Under large amplitude oscillatory shear, such bridges are stretched, and this results in the strain-hardening behavior. The onset of strain hardening is predicted to be dependent only on the average distance separating the two plates and is independent of the frequency of the oscillations and the polymer molecular weight.     

Synthesis of 2'-O-methoxyethylguanosine using a novel silicon-based protecting group

A short and efficient synthesis of 2'-O-methoxyethylguanosine (8) is described. Central to this strategy is the development of a novel silicon-based protecting group (MDPSCl(2), 2) used to protect the 3',5'-hydroxyl groups of the ribose. Silylation of guanosine with 2 proceeded with excellent regioselectivity and in 79% yield. Alkylation of the 2'-hydroxyl group of 6 proceeded with methoxyethyl bromide and NaHMDS and afforded compound 7 in 85% yield, without any noticeable cleavage of the silyl protecting group and without the need to protect the guanine base moiety. Finally, deprotection of 7 was achieved using TBAF and produced 8 in 97% yield.     

Tetraphenylethene‐Based Conjugated Fluoranthene: A Potential Fluorescent Probe for Detection of Nitroaromatic Compounds

This study reports the synthesis and photophysical properties of a star‐shaped, novel, fluoranthene–tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation‐induced blue‐shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature‐dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6‐trinitrophenol (PA) with high sensitivity and a high Stern–Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70 % water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5 ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70 % exhibit high Stern–Volmer constants (K_sv=79 998 and 51 120 m ^?1, respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra‐low‐level detection of PA for real‐time field analysis.     

Electrochemical studies of novel olivine-layered (LiFePO4-Li2MnO3) dual composite as an alternative cathode material for lithium-ion batteries

Journal of Solid State Electrochemistry - In the present work, olivine-layered composites, i.e., LiFePO4-Li2MnO3, are successfully synthesized in the form of a single monolithic electrode and layer...     

Clouding and Hydrodynamic Behavior of Pluronic-Surfactant Interaction in Aqueous Salt Solutions

Clouding behavior of PEO-PPO-PEO and PPO-PEO-PPO block copolymers were studied in presence of sodium dodecyl sulfate (SDS) and NaCl. Extensive study of Pluronic P84 (EO₁₉PO₄₃EO₁₉) with different salts and ionic surfactants, were carried out using cloud point, viscosity and dynamic light scattering (DLS) measurements. The change in cloud point, as well as the size of P84 micelles in aqueous salt solution obeys the Hofmeister lyotropic series. Results on P84-ionic surfactant mixture indicate stronger interaction in case of SDS compared to those in presence of dodecyl trimethylammonium chloride (DTAC); here interaction seems to diminish in the presence of salts.