Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

Investigation of tightly coupled porphyrin arrays comprised of identical monomers for multibit information storage

Our prior designs for molecular-based information storage devices have employed multiple redox-active units organized in weakly coupled, covalently linked arrays. To explore a simpler design, we report here the synthesis of porphyrin arrays where porphyrins with identical oxidation potentials are directly linked to one another instead of joined via a molecular linker. Oxidative coupling with AgPF(6) of zinc(II)-5,15-bis(4-tert-butylphenyl)-10-phenylporphyrin, obtained by a rational synthesis, afforded the expected dimer joined by a meso-meso linkage and an unexpected trimer joined by meso-meso linkages. For attachment to an electroactive surface we synthesized a meso-linked porphyrin dimer with a thiol-linker in one of the meso positions. The S-acetyl protecting group was used to avoid handling free thiol groups. Coupling of zinc(II)-5,10,15-tris(3, 5-di-tert-butylphenyl)porphyrin ("upper half") and zinc(II)-5-[4-(S-acetylthio)phenyl]-10,20-bis(3, 5-di-tert-butylphenyl)porphyrin ("lower half") afforded three different meso-linked dimers with the desired dimer as the main product. Electrochemical examination of the meso-linked dimer in solution shows that the first two oxidation potentials of the array differ by approximately 0.15 V and straddle the value exhibited by the monomeric constituents. The third and fourth oxidation potentials of the array are also split although to a lesser extent ( approximately 0.08 V) than the first and second. For the meso-linked trimer, the first three oxidation waves are also split; however, these waves are severely overlapped. The electrochemical behavior of the dimers and trimer is indicative of strong electronic interactions among the porphyrins. The thiol-derivatized meso-linked dimers form self-assembled monolayers (SAMs) on gold via in situ cleavage of the S-acetylthio protecting group. The porphyrin SAM exhibits four well-resolved oxidation waves. Regardless, the meso-meso linkage is relatively unstable upon formation of the pi-cation radical(s). This characteristic indicates that the structural motif is of limited utility for molecular information storage elements.     

Measurements of electron-transfer rates of charge-storage molecular monolayers on Si(100). Toward hybrid molecular/semiconductor information storage devices

Redox kinetics were measured for two electroactive molecules attached to Si(100) surfaces, a ferrocene (Fc-BzOH) and a Zn(II) trimesitylporphyrin (Por-BzOH). Each molecule was derivatized with a benzyl alcohol linker for attachment to the Si surface via the formation of a Si-O bond. A complete protocol was developed for the preparation of stable Si(100) surfaces derivatized with the electroactive molecules. The redox-kinetic measurements were performed on the resulting Fc-BzOH and Por-BzOH monolayers to probe (1) the rate of electron transfer (k0) for oxidation in the presence of applied potentials and (2) the rate of charge dissipation after the applied potential is disconnected (in the form of a charge-retention half-life t1/2). The k0 values for the two types of monolayers were found to be similar to one another as were the t1/2 values. Perhaps more importantly, the electron-transfer rates for both the Fc-BzOH and the Por-BzOH monolayers differ from the charge-dissipation rates by approximately 6 orders of magnitude and are strongly dependent on the surface concentration of the electroactive species. For the Por-BzOH monolayers on Si(100), the k0 and t1/2 values and their trends as a function of surface coverage were determined to be similar to those previously measured for the analogous thiol-derivatized molecule assembled on Au(111). In contrast, the Fc-BzOH monolayers on Si(100) were found to exhibit much slower electron-transfer and charge-dissipation rates than those in the corresponding thiol-Au(111) case. Two alternative hypotheses are advanced to explain both the diminution in rates with increased surface coverage and the contrasting behavior with the analogous thiols on Au, one based on space-charge effects at the monolayer-solution interface, and a second relying on changes in distance of the redox centers from the surface as modulated by the orientation of the linking chains. Collectively, the ability to prepare and study stable, electroactive molecular media on Si(100) is likely to be key in the development of hybrid molecular/semiconductor devices.     

Effect of nanoimprinted surface relief on Si and Ge nucleation and ordering

Surface relief formed by nanoimprinting and etching into a thermally grown SiO₂ layer on Si was used to position the initial nuclei formed by chemically vapor deposited Si and Ge. By controlling the deposition conditions, the surface diffusion length was adjusted to be comparable to or larger than the spacing between features, thus favoring nucleation adjacent to steps, rather than random nucleation. Random nucleation was further suppressed by a two-stage deposition process. Ge nucleation on oxide by chemical vapor deposition was enhanced by coating the oxide surface with an organic self-assembled monolayer (SAM) and by the nanoimprinted surface relief. The nanoimprinted surface relief also provides long-range order in the SAM.     

Formation and characterization of long-chained alkylsiloxane self-assembled monolayers on atomic-layer-deposited aluminum oxide surfaces

We report the formation of highly robust long-chained alkylsiloxane self-assembled monolayers (SAMs) on aluminum oxide films prepared by atomic-layer deposition (ALD). The surface chemistry and the morphological characteristics of the SAMs were examined by X-ray photoelectron spectroscopy, infrared spectroscopy, atomic-force microscopy, and contact-angle goniometry. The octadecylsiloxane-derived SAMs initially hydrolyze and deposit on the alumina surface as ∼1.8 nm thick, monolayer-high islands ≤50 nm in diameter. The size of these islands increases with time, likely through a surface-diffusion aggregation process. Coalescence of neighboring islands leads to a densely packed and robust monolayer on the alumina surface. The SAMs on ALD alumina are expected to be useful in a number of nanostructure applications where the combination of conformal alumina deposition and conformal coverage of the alumina by an organic layer is critical. PACS 81.16.Dn; 81.65.Kn; 82.45.Mp; 81.65.-b     

Hardness and Fracture Toughness of Solid Solutions of Mg2Si and Mg2Sn

Semiconductors - Thermoelectric material development typically aims at maximizing produced electrical power and efficiency of energy conversion, even though sometimes, this means adding expensive...     

Characterization of self-assembled monolayers of porphyrins bearing multiple thiol-derivatized rigid-rod tethers

A series of multithiol-functionalized zinc porphyrins has been prepared and characterized as self-assembled monolayers (SAMs) on Au. The molecules, designated ZnPS(n) (n = 1-4), contain from one to four [(S-acetylthio)methyl]phenylethynylphenyl groups appended to the meso-position of the porphyrin; the other meso-substituents are phenyl groups. For the dithiol-functionalized molecules, both the cis- and the trans-appended structures were examined. The ZnPS(n) SAMs were investigated using X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and various electrochemical methods. The studies reveal the following characteristics of the ZnPS(n) SAMs. (1) The ZnPS(n) molecules bind to the Au surface via a single thiol regardless of the number of thiol appendages that are available per molecular unit. (2) The porphyrins in the ZnPS(3) and ZnPS(4) SAMs bind to the surface in a more upright orientation than the porphyrins in the ZnPS(1), cis-ZnPS(2), and trans-ZnPS(2) SAMs. The porphyrins in the ZnPS(3) and ZnPS(4) SAMs are also more densely packed than those in the cis-ZnPS(2) and trans-ZnPS(2) SAMs. The packing density of the ZnPS(3) and ZnPS(4) SAMs is similar to that of the ZnPS(1) SAMs, despite the larger size of the molecules in the former SAMs. (3) The thermodynamics and kinetics of electron transfer are generally similar for all of the ZnPS(n) SAMs. The general similarities in the electron-transfer characteristics for all of the SAMs are attributed to the similar binding motif.     

Value Production in a Collaborative Environment

We review some recent endeavors and add some new results to characterize and understand underlying mechanisms in Wikipedia (WP), the paradigmatic example of collaborative value production. We analyzed the statistics of editorial activity in different languages and observed typical circadian and weekly patterns, which enabled us to estimate the geographical origins of contributions to WPs in languages spoken in several time zones. Using a recently introduced measure we showed that the editorial activities have intrinsic dependencies in the burstiness of events. A comparison of the English and Simple English WPs revealed important aspects of language complexity and showed how peer cooperation solved the task of enhancing readability. One of our focus issues was characterizing the conflicts or edit wars in WPs, which helped us to automatically filter out controversial pages. When studying the temporal evolution of the controversiality of such pages we identified typical patterns and classified conflicts accordingly. Our quantitative analysis provides the basis of modeling conflicts and their resolution in collaborative environments and contribute to the understanding of this issue, which becomes increasingly important with the development of information communication technology.     

Synthesis of thiol-derivatized ferrocene-porphyrins for studies of multibit information storage

One approach toward storage of multiple bits of information at the molecular level requires the construction of molecular architectures comprised of multiple redox-active units. Four new ferrocene-porphyrins have been synthesized to investigate questions concerning (1) the scope of redox-active molecules that can be employed in molecular information-storage schemes and (2) writing/reading rates as well as retention of charge in redox-active units located at different sites in a molecular architecture. Three of the ferrocene-porphyrins have linkers of different lengths between the ferrocene and porphyrin. The fourth ferrocene-porphyrin has two ferrocenes positioned at the lateral sites on the porphyrin. The latter architecture is designed to provide a shorter distance between the electroactive surface and the ferrocene while maintaining an upright orientation of the porphyrin. Each ferrocene-porphyrin affords three cationic oxidation states (ferrocene monocation, porphyrin monocation, porphyrin dication) in addition to the neutral state, thereby affording the capability of storing two bits of information. Each ferrocene-porphyrin bears an S-acetyl or S-(N-ethyl)carbamoyl-protected thiol moiety, thereby avoiding handling of free thiols. Each ferrocene-porphyrin forms a self-assembled monolayer (SAM) on gold via in situ cleavage of the thiol protecting group. The SAM of each array is electrochemically robust and exhibits three well-resolved, reversible oxidation waves.     

Synthesis of porphyrins bearing hydrocarbon tethers and facile covalent attachment to si(100)

The use of redox-active molecules as the active storage elements in memory chips requires the ability to attach the molecules to an electroactive surface in a reliable and robust manner. To explore the use of porphyrins tethered to silicon via carbosilane linkages, 17 porphyrins have been synthesized. Fourteen porphyrins bear a tether at a single meso site, and three porphyrins bear functional groups at two beta sites for possible two-point attachment. Two high-temperature processing methods (400 degrees C under inert atmosphere) have been developed for rapid (minutes), facile covalent attachment to Si platforms. The high-temperature processing conditions afford attachment either by direct deposition of a dilute solution (1 microM-1 mM) of the porphyrin sample onto the Si substrate or sublimation of a neat sample onto the Si substrate. The availability of this diverse collection of porphyrins enables an in-depth examination of the effects of the tether (length, composition, terminal functional group, number of tethers) and steric bulk of nonlinking substituents on the information-storage properties of the porphyrin monolayers obtained upon attachment to silicon. Attachment proceeds readily with a wide variety of hydrocarbon tethers, including 2-(trimethylsilyl)ethynyl, vinyl, allyl, or 3-butenyl directly appended to the porphyrin and iodo, bromomethyl, 2-(trimethylsilyl)ethynyl, ethynyl, vinyl, or allyl appended to the 4-position of a meso-phenyl ring. No attachment occurs with substituents such as phenyl, p-tolyl, mesityl, or ethyl. Collectively, the studies show that the high-temperature attachment procedure (1) has broad scope encompassing diverse functional groups, (2) tolerates a variety of arene substituents, and (3) does not afford indiscriminate attachment. The high-temperature processing conditions are ideally suited for use in fabrication of hybrid molecular/semiconductor circuitry.