A high-performance multichannel dual-gate poly-Si TFT fabricated by excimer laser irradiation on a floating a-Si thin film

A new excimer laser annealing (ELA) process that uses a floating amorphous-Silicon (a-Si) thin film with a multichannel structure is proposed for high-performance poly-Si thin-film transistors (TFTs). The proposed ELA method produces two-dimensional (2-D) grain growth, which can result in a high-quality grain structure. The dual-gate structure was employed to eliminate the grain boundaries perpendicular to the current flow in the channel. A multichannel structure was adapted in order to arrange the grain boundary to be parallel to the current flow. The proposed poly-Si TFT exhibits high-performance electrical characteristics, which are a high mobility of 504 cm/sup 2//Vsec and a low subthreshold slope of 0.337 V/dec.     

Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters     

Preparation of enantiomerically pure (R)-2-butyryloxymethylglycidol by lipase-catalyzed asymmetric hydrolysis

Optically active epoxy alcohol, (R)-2-butyryloxymethylglycidol3 which is the precursor of a tert-alcohol chiral building block was obtained in high enantiomeric purity, 98.7% e.e., by lipase-catalyzed asymmetric hydrolysis using a phosphate buffer and organic co-solvent system in 95% of chemical yield.     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Statistical properties of out-of-frame detection schemes fordigital transmission systems

The importance of the misframe times for DS1 frame synchronization has often been addressed in designing and using network elements and mediation units. By extending the work of J. H. Eu and W. W. Rollins (1991), Markov chain first passage time analysis is used to derive higher moments of the misframe times in both random and burst error environments. This methodology is of great value in evaluating frame synchronization techniques for digital transmission systems. By experimenting with several out-of-frame detection schemes and reasonable values for bit error ratio (BER), it is shown that misframe times are always approximately exponentially distributed for all schemes     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

Statistical analysis of decision threshold for parallel acquisitionwith reference filtering in Rician fading channel

Statistical analysis of the decision threshold for parallel PN code acquisition in a Rician fading channel is presented. It is shown that in the performance analysis of the acquisition system with reference filtering, the statistical evaluation of the decision threshold seems more appropriate than the approximation of the decision threshold     

Stereochemistry of cytidine: conformational analysis and hydrogen bonding

The energy calculations using the INDO molecular orbital method and classical potential function show that the syn conformation of pyrimidine nucleosides having the C_(2')-endo or C_(2')-endo-C_(3')-endo sugar ring puckering is as stable as the corresponding anti form.The O_(2')-O_(2') base-ribose hydrogen bonding significantly alters the Φ_CN conformation by confining the allowed Φ_CN ranges to about 150–210°.     

Molecular characteristics of the inhibition of human neutrophil elastase by nonsteroidal antiinflammatory drugs

Nonsteroidal antiinflammatory drugs(NSAIDs) are known as clinically effective agents for treatment of inflammatory diseases. Inhibition of cyclooxygenase has been thought to be a major facet of the pharmacological mechanism of NSAIDs. However, it is difficult to ascribe the antiinflammatory effects of NSAIDs solely to the inhibition of prostaglandin synthesis. Human neutrophil elastase (HNElastase; HNE, EC 3.4.21.37) has been known as a causative factor in inflammatory diseases. To investigate the specific relationship between HNElastase inhibition and specificity of molecular structure of several NSAIDs, HNElastase was purified by Ultrogel AcA54 gel filtration, CM-Sephadex ion exchange, and HPLC (with TSK 250 column) chromatography. HNElastase was inhibited by aspirin and salicylate in a competitive manner and by naproxen, ketoprofen, phenylbutazone, and oxyphenbutazone in a partial competative manner, but not by ibuprofen and tolmetin. HNElastase-phenylbutazone-complex showed strong Raman shifts at 200, 440, 1124, 1194, 1384, 1506, and 1768 cm(-1). The Raman bands 1194, 1384, and 1768 cm(-1) may represent evidences of the conformational change at -N=N-phi radical, pyrazol ring, and -C=O radical of the elastase-drug complex, respectively. Phenylbutazone might be bound to HNElastase by ionic and hydrophobic interaction, and masked the active site. Inhibition of HNElastase could be another mechanism of action of NSAIDs besides cyclooxygenase inhibition in the treatment of inflammatory diseases. Different inhibition characteristics of HNE-lastase by NSAIDs such as aspirin, phenylbutazone-like drugs and ineffective drugs could be important points for drawing the criteria for appropriate drugs in clinical application.