Dual Band PIFA MIMO Antenna Design with High Isolation for Mobile and Wireless Applications by Using the Genetics Algorithms and Non-uniform Overlapping Method

Wireless Personal Communications - Due to the development and growth of Internet platforms and web services as communication resources, the competition for the network and its limited resources is...     

A new composite scheme for two-layer shallow water flows with shocks

This paper is devoted to solve the system of partial differential equations governing the flow of two superposed immiscible layers of shallow water flows. The system contains source terms due to bottom topography, wind stresses, and nonconservative products describing momentum exchange between the layers. The presence of these terms in the flow model forms a nonconservative system which is only conditionally hyperbolic. In addition, two-layer shallow water flows are often accompanied with moving discontinuities and shocks. Developing stable numerical methods for this class of problems presents a challenge in the field of computational hydraulics. To overcome these difficulties, a new composite scheme is proposed. The scheme consists of a time-splitting operator where in the first step the homogeneous system of the governing equations is solved using an approximate Riemann solver. In the second step a finite volume method is used to update the solution. To remove the non-physical oscillations in the vicinity of shocks a nonlinear filter is applied. The method is well-balanced, non-oscillatory and it is suitable for both low and high values of the density ratio between the two layers. Several standard test examples for two-layer shallow water flows are used to verify high accuracy and good resolution properties for smooth and discontinuous solutions.     

Numerical solution of the time-dependent incompressible Navier-Stokes equations in the stream function and vorticity formulation

In this work we study the time-dependent incompressible Navier-Stokes problem. We introduce a suitable technique based on the splitting of the vorticity into two components. Then we discretize in space the resulting uncoupled system by means of continuous Lagrange finite elements. This is achieved by first performing the semi-discretization in time of these equations by a classical characteristics method for the advective term. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Beam-Steerable Ultra-Wide-Band Miniaturized Elliptical Phased Array Antenna Using Inverted-L-Shaped Modified Inset Feed and Defected Ground Structure for 5G Smartphones Millimeter-Wave Applications

Multi Input Multi Output (MIMO) and phased array systems are considered a key technologies to realize the 5G communication systems. Therefore, the purpose of this research is the suggestion of a novel mm-wave Ultrawide Band (UWB) antenna design with compact and straightforward layout suitable for both MIMO and phased array systems. Hence, the designed antenna array has been studied separately as a MIMO antenna and as a phased array antenna to carefully assess the performance of each system. The single antenna design is an elliptical patch antenna where the design novelty lies in the combination of a modified inset-feed and defected ground structure to provide a large bandwidth without any compromise in the radiation performance, nor in antenna size and design simplicity. The Design process are performed using CST MWS software, where the Rogers RT/Duroid 5880 substrate is chosen to construct the antenna. A broadband characteristic of 8.7 GHz from 26 to 34.7 GHz with two resonant frequencies at 28 GHz and 33 GHz is obtained. A good radiation properties are achieved, where the gain is greater than 4.5 dB while the radiation efficiency exceeds 97% over the operating band. The MIMO and phased array antennas are made up of 12-elements of the single UWB-antenna arranged linearly along the width-edge of the smartphone mainboard. The MIMO antenna proves a high diversity performance in terms of Diversity Gain (DG), Envelope Correlation Coefficient (ECC), Total Active Reflection Coefficient (TARC), Channel Capacity Loss (CCL) and Mean Effective Gain (MEG), owing to the low mutual coupling less than ??20 dB, which is obtained using a separating slits between the elements. In addition, the suggested phased array provides a highly stable gain up to 15 dB over the entire bandwidth at broadside direction, besides the wide scanning range of?±?60° at 28 GHz and?±?40° at 33 GHz. Hence, the attained results assure that the suggested antenna could be appropriate for incorporation in 5G smartphones and other wireless devices and can be effectively used for both phased array and MIMO applications.

     

Numerical solution of the time-dependent incompressible Navier–Stokes equations by piecewise linear finite elements

In this paper we present a new method to solve the 2D generalized Stokes problem in terms of the stream function and the vorticity. Such problem results, for instance, from the discretization of the evolutionary Stokes system. The difficulty arising from the lack of the boundary conditions for the vorticity is overcome by means of a suitable technique for uncoupling both variables. In order to apply the above technique to the Navier–Stokes equations we linearize the advective term in the vorticity transport equation as described in the development of the paper. We illustrate the good performance of our approach by means of numerical results, obtained for benchmark driven cavity problem solved with classical piecewise linear finite element.     

A Pentagonal Shaped Microstrip Planar Antenna with Defected Ground Structure for Ultrawideband Applications

A new compact pentagonal microstrip patch antenna with slotted ground plane structure, developed for use in ultrawideband applications, is studied in this article. The proposed antenna is mainly constituted by a pentagonal shaped patch antenna, a defected ground plane structure, two stubs, and four slots to improve the bandwidth. The designed antenna has an overall dimension of 30?×?17.59?×?1.6 mm³, for WIMAX/WLAN/WiFi/HIPERLAN-2 /Bluetooth/LTE/5G applications with a very large bandwidth starting from 2.66 to 10.82 GHz (S₁₁?<???6 dB). A parametric study of the ground plane structure was carried out to find the final and the optimal UWB antenna, and to confirm that the antenna has good performance and broader bandwidth. The proposed antenna prototype has been fabricated. The measured results indicate that the antenna has a good impedance matching. The antenna has an electrically small dimension with a good gain, a notable efficiency, and a wide impedance bandwidth, which makes this antenna an excellent candidate for ultrawideband wireless communication, microwave imaging, radar applications, and the major part of the mobile phone frequencies as well.

     

On some three-field mixed systems

In this work we present a modified mixed formulation for some three-field problems. Under a special hypothesis the modified formulation is such that: the verification of two (BB) conditions is avoided and one has to deal only with one, and the new problem has exactly the same solution as the old one. This revised version was published online in June 2006 with corrections to the Cover Date.