Middleware Technologies for Smart Wireless Sensor Networks towards Internet of Things: A Comparative Review

Wireless Personal Communications - Internet of Things (IoT) offers complex networks of connected devices, which are used to serve in the real-time environment. Interestingly, Wireless Sensor...     

On the photometric determination of trivalent rhodium with eriochromecyanine RC

Summary Eriochromecyanine RC has been used as chromogenic reagent for the photometric determination of rhodium(III) on a micro scale. A coloured Rh(III)-ECRC chelate with _max 530 nm at pH 4.0 (25°C) is formed. A detailed study has been made concerning to characteristics, composition and stability of the chelate. Standard deviation was ±1.17%.

---

Über die photometrische Bestimmung von dreiwertigem Rhodium mit Eriochromcyanin RC

Zusammenfassung Ergebnisse einer Untersuchung über die Zusammensetzung und Stabilität des Komplexes werden mitgeteilt. Das Absorptionsmaximum liegt bei 530 nm (pH 4,0; 25°C). Bestimmungen konnten mit einer Standardabweichung von ±1,17% durchgeführt werden.

     

A Mild and Efficient Route to 3-Vinylchromones in Aqueous Micellar Media

A simple, mild, and ecofriendly method has been developed for the synthesis of 3-vinylchromones from 4-oxo-4H-1-benzopyran-3-carboxaldehyde (3-formylchromone) by simple Knoevenagel condensation with various active methylene compounds (AMC) in aqueous micellar media in the presence of catalytic amounts of cetyl trimethylammonium bromide (CTAB) and 1,4-diazabicyclo[2.2.2]octane (DABCO). In the case of malonic acid as AMC, the reaction resulted in formation of only Doebner decarboxylated products under the standard reaction condition. It has been also observed that 3-formylchromone derivatives primarily undergo tandem Knoevenagel and Michael reactions in the presence of > 2 equiv. of ethyl acetoacetate to produce benzophenone derivatives, by opening of pyran ring, as the sole product in good yields.     

Gauging universe expansion via scalar fields

In this study, we investigate the expansion of the FRLW universe in the open, closed, and flat geometries. The universe is dominated by a scalar field (spatially homogeneous) as a source of dark energy. We consider the three different classes of scalar fields – quintessence, tachyonic, and phantom field – for our analysis. A mathematical analysis is carried out by considering these three scalar fields with exponential and power-law potentials. Both potentials give exponential expansion in the open, closed, and flat FRLW universes. It is found that quintessence, tachyonic, and phantom scalar fields are indistinguishable under the slow roll approximation.     

Synthesis of a series of ethylene glycol modified water-soluble tetrameric TPE-amphiphiles with pyridinium polar heads: Towards applications as light-up bioprobes in protein and DNA assay,and wash-free imaging of bacteria

Available online Development of water soluble AIE-active “light-up” bioprobes for the detection of biomacromolecules has drawn huge research interests in recent past. In this study, a series of ethylene glycol modified water soluble tetrameric tetraphenylethylene amphiphiles with pyridinium polar heads (TPE-xEG-Py, x = 3, 4, 6 or 1a-c) have been synthesized by varying the ethylene glycol spacer. Their unique structure allows them to form vesicles and other nanoaggregates in aqueous solutions. These amphiphiles were successfully utilized for fluorimetric detection and quantitation of BSA and DNA based on the electrostatic interactions to trigger AIE-emission from the TPE moiety. The electrostatic interaction was also proved very effective in wash-free imaging of both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria with up to 92 folds increase in fluorescence response within bacterial concentration 0–12 × 10⁸ CFU mL^?1. The strategy is advantageous due to cost-effective and easy synthesis, high water solubility, and fast response.     

Challenges and opportunities for next-generation intracortically based neural prostheses

Neural prosthetic systems aim to help disabled patients by translating neural signals from the brain into control signals for guiding computer cursors, prosthetic arms, and other assistive devices. Intracortical electrode arrays measure action potentials and local field potentials from individual neurons, or small populations of neurons, in the motor cortices and can provide considerable information for controlling prostheses. Despite several compelling proof-of-concept laboratory animal experiments and an initial human clinical trial, at least three key challenges remain which, if left unaddressed, may hamper the translation of these systems into widespread clinical use. We review these challenges: achieving able-bodied levels of performance across tasks and across environments, achieving robustness across multiple decades, and restoring able-bodied quality proprioception and somatosensation. We also describe some emerging opportunities for meeting these challenges. If these challenges can be largely or fully met, intracortically based neural prostheses may achieve true clinical viability and help increasing numbers of disabled patients.     

Methane hydrate formation and dissociation in synthetic seawater

The formation and dissociation of methane gas hydrate at an interface between synthetic seawater (SSW) and methane gas have been experimentally investigated in the present work. The amount of gas consumed during hydrate formation has been calculated using the real gas equation. Induction time for the formation of hydrate is found to depend on the degree of subcooling. All the experiments were conducted in quiescent system with initial cell pressure of 11.14 MPa. Salinity effects on the onset pressure and temperature of hydrate formation are also observed. The dissociation enthalpies of methane hydrate in synthetic seawater were determined by Clausius-Clapeyron equation based on the measured phase equilibrium data. The dissociation data have been analyzed by existing models and compared with the reported data.     

Nitric oxide reactivity of copper(II) complexes of bidentate amine ligands: effect of chelate ring size on the stability of a [Cu(II)-NO] intermediate

Three copper(II) complexes, 1, 2, and 3 with L(1), L(2) and L(3) [L(1) = 2-(2-aminoethyl)-pyridine; L(2) = 2-(N-ethyl-2-aminoethyl)-pyridine; L(3) = 3,3'-iminobis(N,N-dimethylpropylamine)], respectively, were synthesized and characterized. Addition of nitric oxide gas to the degassed acetonitrile solution of the complexes were found to result in the reduction of the copper(II) center to copper(I). In cases of complexes 1 and 2, the formation of the [Cu(II)-NO] intermediate prior to the reduction of Cu(II) was evidenced by UV-visible, solution FT-IR and X-band EPR spectroscopic studies. However, for complex 3, the formation of [Cu(II)-NO] has not been observed. DFT calculations on the [Cu(II)-NO] intermediate generated from complex 1 suggest a distorted square pyramidal geometry with the NO ligand coordinated to the Cu(II) center at an equatorial site in a bent geometry. In the case of complex 1, the reduction of the copper(II) center by nitric oxide afforded ligand transformation through diazotization at the primary amine site in acetonitrile solution; whereas, in an acetonitrile-water mixture, it resulted in 2-(pyridine-2-yl)ethanol. On the other hand, in cases of complexes 2 and 3, it was found to yield N-nitrosation at the secondary amine site in the ligand frameworks. The final organic products, in each case, were isolated and characterized by various spectroscopic studies.     

Unraveling the Rationale Behind Organic Solvent Stability of Lipases

Organic solvent-stable lipases have pronounced impact on industrial economy as they are involved in synthesis by esterification, interesterification, and transesterification. However, very few of such natural lipases have been isolated till date. A study of the recent past provided few pillars to rely on for this work. The three-dimensional structure, inclusive of the surface and active site, of 29 organic solvent-stable lipases was analyzed by subfamily classification and protein solvent molecular docking based on fast Fourier transform correlation approach. The observations revealed that organic solvent stability of lipases is their intrinsic property and unique with respect to each lipase. In this paper, factors like surface distribution of charged, hydrophobic, and neutral residues, interaction of solvents with catalytically immutable residues, and residues interacting with essential water molecules required for lipase activity, synergistically and by mutualism contribute to render a stable lipase organic solvent. The propensity of surface charge in relation to stability in organic solvents by establishing repulsive forces to exclude solvent molecules from interacting with the surface and prohibiting the same from gaining entry to the protein core, thus stabilizing the active conformation, is a new finding. It was also interesting to note that lipases having equivalent surface-exposed positive and negative residues were stable in a wide range of organic solvents, irrespective of their LogP values.     

Design and analysis of MISO bi-quad active filter

ABSTRACT

In this paper, a multiple-input single-output (MISO) voltage-mode bi-quad active filter using voltage differencing voltage transconductance amplifier (VDVTA) is designed and analysed. The filter can realize several functions such as low-pass (LP), high-pass (HP), band-pass (BP), band-reject (BR) and all-pass (AP). The proposed configuration employs three input voltages and generates a single output voltage. The filter characteristics, i.e., pole frequency (ω_p) and quality factor (Q) are electronically tunable through the bias current of the VDVTA. The filter performance is analysed through sensitivity analysis in presence of parasitics as well as process, voltage and temperature fluctuations. The proposed design is implemented in a 45-nm CMOS technology and simulated using Virtuoso Analog Design Environment of Cadence.