Floating-island TFT leakage caused by process step reduction

The leakage mechanism for a top-gate thin-film transistor (TFT) produced using the fewest process steps in the industry is analyzed in order to achieve a high-contrast liquid crystal display (LCD). Using a T-shaped TFT structure, the OFF and ON channel lengths are defined independently, so that the leakage can be reduced with no ON current decrease     

Amperometric biosensor based on reductive H2O2 detection using pentacyanoferrate-bound polymer for creatinine determination

Pentacyanoferrate-bound poly(1-vinylimidazole) (PVI[Fe(CN)₅]) was selected as a mediator for amperometric creatinine determination based on the reductive H₂O₂ detection. Creatinine amidohydrolase (CNH), creatine amidohydrolase (CRH), sarcosine oxidase (SOD), peroxidase (POD), and PVI[Fe(CN)₅] were crosslinked with poly(ethylene glycol) diglycidyl ether (PEGDGE) on a glassy carbon (GC) electrode for a creatinine biosensor fabrication. Reduction current was monitored at −0.1 V in the presence of creatinine and O₂. It is revealed that PVI[Fe(CN)₅] is suitable as a mediator for a bioelectrocatalytic reaction of POD, since PVI[Fe(CN)₅] neither reacts with reactants nor works as an electron acceptor of SOD. The amounts of PVI[Fe(CN)₅], PEGDGE, and enzymes were optimized toward creatinine detection. Nafion as a protecting film successfully prevented the enzyme layer from interferences. The detection limit and linear range in creatinine determination were 12 μM and 12–500 μM (R² = 0.993), respectively, and the sensitivity was 11 mA cm⁻² M⁻¹, which is applicable for urine creatinine tests. The results of the creatinine determination for four urine samples measured with this proposed method were compared with Jaffe method, and a good correlation was obtained between the results.     

Highly selective iodide-sensing silicone ladder polymer membranes containing a porphyrin and a quaternary ammonium salt.

It has been demonstrated that a glass-like silicone ladder-type polymer permits one to homogeneously incorporate high amounts of ionophores into the covalently-bonded double chain structure. Furthermore, by making use of this feature, we have successfully fabricated an iodide ion-sensitive field-effect transistor based on two kinds of ionophores and silicone ladder polymer matrix. As ionophores, 5,10,15,20-tetraphenyl-21H,23H-porphyrin and dimethyloctadecyl-3-trimethoxylsilylpropylammonium chloride were homogeneously incorporated into the matrix. The ion-sensitive field-effect transistor showed a linear potential response ranging in the I- concentration between 1.0 x 10(-5) and 1.0 x 10(-1) M. The selectivity coefficients for I- towards interferences of ClO4- and NO3- were estimated to be Kpot(I-,ClO4-) approximately 6.2 x 10(-4) and Kpot(I-,No3-) approximately 4.9 x 10(-4). The matrix has proved to be so stable that the selectivity coefficients have not been altered over six months.     

The anomalous behaviour of Gd atoms (Fe1−xMnx)2 compounds

The educed Gd atoms in the X-structure (Th₆Mn₂₃-type) of Gd(Fe_1−xMn_x)₂ were magnetically investigated by comparing with Gd₆(Fe_1−yMn_y)₂₃ whose structure is Th₆Mn₂₃-type. The magnetic properties of Gd(Fe_1−xMn_x)₂ (0.4≤x≤0.7) were observed to be quite similar to those of Gd₆(Fe_1−yMn_y)₂₃ (0.4≤y≤0.7).     

Influence of wall heat loss on the emission characteristics of premixed ammonia-air swirling flames interacting with the combustor wall

The influence of wall heat loss on the emission characteristics of ammonia-air swirling flames has been investigated employing Planar Laser-Induced Fluorescence imaging of OH radicals and Fourier Transform Infrared spectrometry of the exhaust gases in combustors with insulated and uninsulated walls over a range of equivalence ratios, ?, and pressures up to 0.5 MPa. Strong influence of wall heat loss on the flames led to quenching of the flame front near the combustor wall at 0.1 MPa, resulting in large unburned NH₃ emissions, and inhibited the stabilization of flames in the outer recirculating zone (ORZ). A decrease in heat loss effects with an increase in pressure promoted extension of the fuel-rich stabilization limit owing to increased recirculation of H₂ from NH₃ decomposition in the ORZ. The influence of wall heat loss resulted in emission trends that contradict already reported trends in literature. NO emissions were found to be substantially low while unburned NH₃ and N₂O emissions were high at fuel-lean conditions during single-stage combustion, with values such as 55 ppmv of NO, 580 ppmv of N₂O and 4457 ppmv of NH₃ at ? = 0.8. In addition, the response of the flame to wall heat loss as pressure increased was more important than the effects of pressure on fuel-NO emission, thereby leading to an increase in NO emission with pressure. It was found that a reduction in wall heat loss or a sufficiently long fluid residence time in the primary combustion zone is necessary for efficient control of NH₃ and N₂O emissions in two-stage rich-lean ammonia combustors, the latter being more effective for N₂O in addition to NO control. This study demonstrates that the influence of wall heat loss should not be ignored in emissions measurements in NH₃-air combustion, and also advances the understanding of previous studies on ammonia micro gas turbines.     

Cost‐efficient monitoring of continuous‐time stochastic processes based on discrete observations

Planning a cost‐efficient monitoring policy of stochastic processes arises from many industrial problems. We formulate a simple discrete‐time monitoring problem of continuous‐time stochastic processes with its applications to several industrial problems. A key in our model is a doubling trick of the variables, with which we can construct an algorithm to solve the problem. The cost‐efficient monitoring policy balancing between the observation cost and information loss is governed by an optimality equation of a fixed point type, which is solvable with an iterative algorithm based on the Feynman‐Kac formula. This is a new linkage between monitoring problems and mathematical sciences. We show regularity results of the optimization problem and present a numerical algorithm for its approximation. A problem having model ambiguity is presented as well. The presented model is applied to problems of environment, ecology, and energy, having qualitatively different target stochastic processes with each other.     

NMR and ESR studies on a-Si1−xGex:H prepared by magnetron sputtering

NMR, IR and ESR measurements have been performed for hydrogenated amorphous Si-Ge alloy films prepared by magnetron sputtering. NMR signals similar to those for a-Si:H are observed with no motional narrowing effect. The content of dispersed hydrogen atoms estimated from the narrow component of the NMR signal is independent of the Ge content, although the total hydrogen content decreases with increasing the Ge content. Such NMR results are discussed in conjunction with the results of ESR.     

Design of a graphite-moderated 241Am–Li neutron field to simulate reactor spectra

A neutron calibration field using ²⁴¹Am–Li sources and a moderator was designed to simulate the neutron fields found outside a reactor. The moderating assembly selected for the design calculation consists of a cube of graphite blocks with dimensions of 50 cm by 50 cm by 50 cm, in which the ²⁴¹Am–Li sources are placed. Monte Carlo calculations revealed the optimal depth of the source to be 15 cm. This moderated neutron source can be used to provide a test field that has a large number of intermediate energy neutrons with a small portion of MeV component.