<Emphasis Type="Italic">FCC/BCC</Emphasis> competition and enhancement of saturation magnetization in nanocrystalline Co-Ni-Fe films

The structure, chemical composition, and magnetic properties of electrochemically deposited nanocrystalline Co-Ni-Fe films were investigated using a number of techniques. A high saturation magnetic induction up to B _s = 21 kG was attained. An enhancement of the saturation magnetization compared to the ideal anticipated one was revealed, which correlated with the nonlinear behavior of the structural phase composition and lattice parameters with the change of the composition. The text was submitted by the authors in English.     

Leben, Arbeit, Kommunikation — Harmonie im Dreiklang

An enterprise is not just a tall shiny building or a collection of facilities. Rather, it is the sum of individuals collectively engaged in a common pursuit. From an information and communications perspective, this realization changes everything. By looking at the enterprise as a boundary-less collection of individuals who sometimes work in an office, sometimes at home, and sometimes on the road, we need new communications concepts designed to work with and enhance our complex home and work lives.     

Experimental investigation and numerical simulation of the influence of resonator-length detuning on the output power,pulse duration and spectral width of a cw mode-locked picosecond optical parametric oscillator

We report on a cw mode-locked non-critically phase matched KTP optical parametric oscillator synchronously pumped by a picosecond Ti:Sapphire laser. High average signal output power of up to 950 mW over a large tuning range has been achieved. For this OPO the influence of resonator-length detuning on the output power, pulse duration and spectral bandwidth has been investigated. The measured data are in good agreement with the results of a numerical simulation using a split-step Fourier method which considers the group-velocity mismatch, the group-velocity dispersion and the self-phase modulation. The numerical simulation also describes the measured strong pump depletion and its influence on the OPO output and efficiency.     

Structural and electronic properties of graphite layers grown on SiC(0 0 0 1)

Photoelectron spectroscopy, low-energy electron diffraction, and scanning probe microscopy were used to investigate the electronic and structural properties of graphite layers grown by solid state graphitization of SiC(0 0 0 1) surfaces. The process leads to well-ordered graphite layers which are rotated against the substrate lattice by 30°. On on-axis 6H-SiC(0 0 0 1) substrates we observe graphitic layers with up to several 100 nm wide terraces. ARUPS spectra of the graphite layers grown on on-axis 6H-SiC(0 0 0 1) surfaces are indicative of a well-developed band structure. For the graphite/n-type 6H-SiC(0 0 0 1) layer system we observe a Schottky barrier height of ?_B,n = 0.3 ± 0.1 eV. ARUPS spectra of graphite layers grown on 8° off-axis oriented 4H-SiC(0 0 0 1) show unique replicas which are explained by a carpet-like growth mode combined with a step bunching of the substrate.     

Post deposition purification of PTCDA thin films

The decomposition of perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) molecules during evaporation of unpurified raw material in ultra high vacuum was studied. The fragments were identified by mass spectrometry and the influence of these fragments and further contaminations of the raw material on the electronic structure of PTCDA thin films was measured by photoemission spectroscopy. Annealing of contaminated PTCDA films was tested as cheap and easy to perform method for (partial) post deposition purification of the contaminated films.     

Measurement of elastin hydrolysis by reverse-phase HPLC with on-line post-colum derivatization

Summary Excessive breakdown of elastin, a structural protein, may be related to aortic disease and emphysema. Since L-valyl-L-proline occurs in high concentrations in elastin, a rapid and sensitive method using HPLC with post-column on-line derivatization was used to measure the dipeptide from swine aortic tissue, and the amount of elastin present was determined. Elastin was extracted by alkaline hydrolysis. After neutralization and filtration, the sample was injected onto a ODS-2 gel column, and the dipeptide was eluted by a linear gradient of 0 to 10% of 1-propanol in 50 mM heptafluorobutyrate, pH 3, at a flow rate of 1 ml/min. The eluent was reacted with fluorescamine at pH 8.6, and fluorescence was detected at an excitation wavelength of 395 nm and a 455 nm cutoff emission filter.Presented at the 17th International Symposium on Chromatography, September 25–30, 1988, Vienna, Austria.     

Tensile behaviour of corroded and hydrogen embrittled 2024 T351 aluminum alloy specimen

The synergetic effect of corrosion and corrosion induced hydrogen embrittlement damage processes which occur at local scale has been found to result in a dramatic macroscopic tensile ductility loss of the 2024 aluminum alloy. In the present work, the tensile behaviour of corroded 2024 T351 specimens has been estimated on the basis of FE analysis by taking into account the local material properties in the damaged areas. A parametric study is involved to account for the effect of thickness in the results. Calculated tensile properties obtained with the analysis agree well with experimental data.     

Local approximations for maximum partial subgraph problem

We deal with MAXH₀-FREE PARTIAL SUBGRAPH. We mainly prove that 3-locally optimum solutions achieve approximation ratio (δ₀+1)/(B+2+ν₀), where B=max_v∈Vd_G(v), δ₀=min_v∈V(H0)d_H0(v) and ν₀=(|V(H₀)|+1)/δ₀. Next, we show that this ratio rises up to 3/(B+1) when H₀=K₃. Finally, we provide hardness results for MAXK₃-FREE PARTIAL SUBGRAPH.     

Die zweite Phase der Feldbusentwicklung

The past decade may be regarded as the phase of the fundamental developments in fieldbus systems that were based on the OSI model. Today we are entering a second stage. It is the objective of this issue to present the current state and where the further developments will lead to. This introductory article is intended to give an overview on the subject.     

Picosecond control of coherent magnetisation dynamics in permalloy thin films by picosecond magnetic field pulse shaping

We have measured the response of a 20×10 μm, 8 nm thin NiFe (80:20) permalloy film due to excitation by short in-plane magnetic field pulses. We will show that using a two-pulse-technique a complete control of the precessional motion of the magnetisation can be achieved on picosecond timescales. Furthermore, we will present numerical calculations which show that a complete suppression of magnetisation ringing after switching can only be realised by a cascade of short field pulses.