Stoichiometry-dependent formation of quantum dot-antibody bioconjugates: a complementary atomic force microscopy and agarose gel electrophoresis study

The unique advantages of quantum dot (QD) bioconjugates have motivated their application in biological assays. However, physical characterization of bioconjugated QDs after surface modification has often been overlooked. Here, biotinylated antibodies (biotin-IgG) were attached to commercial streptavidin-conjugated quantum dots (strep-QDs) at different stoichiometric ratios, and these QD bioconjugates were characterized with atomic force microscopy and discontinuous sodium dodecyl sulfate agarose gel electrophoresis (SDS-AGE). The results from these complementary analytical techniques showed that the molar ratio determined the relative sizes, molecular weights and morphologies of the QD bioconjugates. Additionally, the novel discontinuous SDS-AGE analysis confirmed specific binding between biotin-IgG and strep-QDs. Researchers who design QD bioconjugates for cell-based assays should consider stoichiometry-dependent differences in the physical properties of their QD bioconjugates.     

LC–MS Determination of Gabapentin from Human Plasma

Gabapentin is an anticonvulsant drug used for the treatment of epilepsy. It is not bound to plasma protein and is not metabolized. A high performance liquid chromatography–mass spectrometric micro method is described in this report for its determination from human plasma. Chromatography was performed on a 50 × 4.6 mm, 4 μm nitrile column and the parent ion detected in the positive ionization mode on single quadrupole analyzer (Q1MI) with atmospheric pressure ionization source. Extraction was carried out on C₁₈, 100 mg/3cc cartridge using 10 μL sample volume. The mean extraction recovery was 97% and within batch and between batch coefficients of variation were <9%. Lack of interference from endogenous substances helped in achieving a highly sensitive method without the need for monitoring fragment ions. The lowest concentration injected on column for calibration curve was 195 pg (range 0.5–64 ng). The method was applied for analysis of samples from a cross-over bio-equivalence study comparing two formulations.     

Determination of Total Reduced Thiol Levels in Plasma Using a Bromide Substituted Quinone

The exploitation of 2‐bromo‐1,4‐naphthoquinone (NQBr) as a selective redox label for the determination of reduced thiol functionalities (RSH) has been investigated. The system is selective for RSH functionality, giving distinct voltammetric signals for glutathione and cysteine but can also be adapted for broad spectrum thiol detection. Ion chromatographic protocols based on conductimetric detection enable total RSH analysis (protein and monomolecular moieties) within human plasma. Bromide released through the reaction can be easily quantified and integrated within normal IC measurements. The efficacy of the approach has been assessed and the response validated through comparison with the standard colorimetric technique.     

Effect of Artabotrys odoratissimus extract as an environmentally sustainable inhibitor for mild steel corrosion in 0.5 M H2SO4 media

Artabotrys odoratissimus inhibitory effect on mild steel (MS) corrosion in 0.5 M H₂SO₄ solution has been assessed utilizing mass loss, electrochemical potentiodynamic polarization, and impedance spectroscopy techniques. The Artabotrys odoratissimus plant has a wide range of bioactive compounds. Phytochemicals were tested for ethanolic Artabotrys odoratissimus leaves extract (AOLE) using the FeCl₃ test, Salkowaski's test, and others. Corrosion tests were conducted at varying inhibitor concentrations and temperatures. The inhibitory impact of AOLE on corrosion of MS was reported to improve with increasing concentration. Polarization experiments revealed that AOLE is a mixed kind of inhibitor and the inhibition efficacy (η_w) for MS is 93.27% for 1.25 g/L AOLE. For Electrochemical impedance spectroscopy (EIS), maximal inhibitory efficacy (η_w) was 91.62% due to AOLE adsorption on the MS surface. The obtained results using each methodology are highly consistent and closely resemble each other. The adsorption of AOLE molecules on an MS surface from the bulk of the solution causes the inhibitor's inhibition action, and the adsorption mechanism follows Langmuir adsorption isotherm. The computed $\Delta G_{ads}^o$ values ranged between ?32.919 and ?33.520 kJ mol^?1, implying a spontaneous and exothermic inhibitory action. The thermodynamic and activation parameters are often used to understand corrosion inhibition mechanisms. The comparison of corrosion product and pure extract FT-IR spectrum indicates the nature of AOLE adsorption on the MS surface. The surface morphology of MS samples was assessed using atomic force microscopy (AFM), scanning electron microscope (SEM), and contact angle techniques.     

Surface modification of nanoporous alumina surfaces with poly(ethylene glycol)

Nanoporous alumina surfaces have a variety of applications in biosensors, biofiltration, and targeted drug delivery. However, the fabrication route to create these nanopores in alumina results in surface defects in the crystal lattice. This results in inherent charge on the porous surface causing biofouling, that is, nonspecific adsorption of biomolecules. Poly(ethylene glycol) (PEG) is known to form biocompatible nonfouling films on silicon surfaces. However, its application to alumina surfaces is very limited and has not been well investigated. In this study, we have covalently attached PEG to nanoporous alumina surfaces to improve their nonfouling properties. A PEG-silane coupling technique was used to modify the surface. Different concentrations of PEG for different immobilization times were used to form PEG films of various grafting densities. X-ray photoelectron spectroscopy (XPS) was used to verify the presence of PEG moieties on the alumina surface. High-resolution C1s spectra show that with an increase in concentration and immobilization time, the grafting density of PEG also increases. Further, a standard overlayer model was used to calculate the thickness of PEG films formed using the XPS intensities of the Al2p peaks. The films formed by this technique are less than 2.5 nm thick, suggesting that such films will not clog the pores which are in the range of 70-80 nm.     

Nano-bio interface study between Fe content TiO2 nanoparticles and adenosine triphosphate biomolecules

The advent of nano-biotechnology has inspired the interface interaction study between engineered nanoparticles (NPs) and biomolecules. The interaction between Fe content titanium dioxide (TiO₂) NPs and adenosine triphosphate (ATP) biomolecules has been envisioned. The effect of Fe content in TiO₂ matrix was studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The increase in Fe content caused a decrease in particle size with change in morphology from spherical to one-dimensional rod structure. The Fe incorporation in the TiO₂ matrix reduced the transition temperature from anatase to rutile (A-R) phase along with formation of haematite phase of iron oxide at 400°C. The interaction of Fe content TiO₂ NPs with ATP molecule has been studied using spectroscopic method of Raman scattering and infrared vibration spectrum along with TEM. Fe content in TiO₂ has enhanced the interaction efficiency of the NPs with ATP biomolecules. Raman spectroscopy confirms that the NPs interact strongly with nitrogen (N₇) site in the adenine ring of ATP biomolecule. Engineering of Fe content TiO₂ NP could successfully tune the coordination between metal oxide NPs with biomolecules, which could help in designing devices for biomedical applications.     

Simultaneous bioanalysis and pharmacokinetic interaction study of acebrophylline,levocetirizine and pranlukast in Sprague–Dawley rats

The combination of acebrophylline (ABP), levocetirizine (LCZ) and pranlukast (PRN) is used to treat allergic rhinitis, asthma, hay‐fever and other conditions where patients experience difficulty in breathing. This study was carried out with the aim of developing and validating a reverse‐phase high‐performance liquid chromatographic bioanalytical method to simultaneously quantitate ABP, LCZ and PRN in rat plasma. The objective also includes determination of the pharmacokinetic interaction of these three drugs after administration via the oral route after individual and combination treatment in rat. Optimum resolution between the analytes was observed with a C₁₈ Kinetex column (250 mm × 4.6 mm × 5 μm). The chromatography was performed in a gradient elution mode with a 1 mL/min flow rate. The calibration curves were linear over the concentration range of 100–1600 ng/mL. The intra‐ and inter‐day precision and accuracy were found to be within acceptable limits as specified in US Food and Drug Administration guideline for bioanalytical method validation. The analytes were stable on the bench‐top (8 h), after three freeze–thaw cycles, in the autosampler (8 h) and as a dry extract (?80°C for 48 h). The statistical results of the pharmacokinetic study in Sprague–Dawley rats showed a significant change in pharmacokinetic parameters for PRN upon co‐administration of the three drugs.     

Low cost bifunctional initiators for bidirectional living cationic polymerization of olefins. I. isobutylene

We describe the discovery of novel low cost bifunctional initiators 2,4,7,9‐tetramethyl‐tricyclo[6.2.0.0³⁶]deca‐1(8),2,6‐triene‐4,9‐diol (bBCB‐diOH) and 4,9‐dichloro,2,4,7,9‐tetramethyl‐tricyclo[6.2.0.0³⁶]deca‐1(8),2,6‐triene (bBCB‐diCl), for living cationic bidirectional polymerization of olefins, for example, isobutylene. bBCB‐diOH was quantitatively synthesized in one step by UV radiation of commercially available diacetyl durene (DAD) and bBCB‐diCl by hydrochlorination of bBCB‐diOH. These molecules, in conjunction with TiCl₄ coinitiator, initiate the living polymerization of isobutylene. Livingness was demonstrated by linear conversion versus molecular weight (MW) plots and narrow MW distributions. Polymerizations are slower than those initiated by the universally used “hindered” bifunctional initiator 5‐tert‐butyl‐1,3‐bis(1‐chloro‐1‐methyl)benzene and are suitable for rate studies. Herein, we report the synthesis, by the use of bBCB‐diCl, of relatively low MW (M _n < 3000 g mol^?1) allyl‐telechelic polyisobutylene (PIB) used for the synthesis of PIB‐based polyurethanes and that of relatively high MW (M _n > 30,000) living PIB telechelics for the synthesis of thermoplastic elastomers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3716–3724     

Kinetics of catalyzed esterification of acetic acid with n-butanol using carbonized agro-waste

The objective of this research work was to investigate the kinetics of esterification of acetic acid with n-butanol through the variation of experimental parameters. The reaction mixture was catalyzed heterogeneously by a sulfonated catalyst in batch mode of operation. The catalyst was prepared from abundantly available agro-waste, Cajanus cajan husk by chemical activation process, which produces a carbon-based solid catalyst with high surface area. The catalyst was characterized by a Brunauer-Emmet-Teller surface analyzer and Fourier transform infrared spectroscopy to know the surface morphology. Process parameters such as contact time, reaction temperature, and catalyst loading, which can influence the extent of conversion of reactants, were studied. Furthermore, the kinetic investigation was also carried out to estimate the kinetic parameters for uncatalyzed and catalyzed reaction using the second-order pseudo-homogeneous (P-H), Eley-Rideal (E-R), and Langmuir-Hinshelwood (LH) kinetic models for this research work. The kinetic parameters such as activation energy, preexponential factor, and the thermodynamic parameters such as enthalpy and entropy were estimated for uncatalyzed and catalyzed reactions using these three models. The process conditions were optimized for catalyzed and uncatalyzed reactions to obtain the maximum product yield by minimizing root mean square error of each experimental data using the MS-excel solver tool. Thus, this study reveals the high potential of an agro-waste, Cajanus cajan husk as raw material for the synthesis of catalyst. The results show that the E-R model is more appropriate for predicting the dynamic data of an esterification reaction, as the forward rate of reaction estimated using the E-R model are more modified than P-H and L-H models.