Metallo‐supramolecular block copolymer micelles: Improved preparation and characterization

Micelles prepared from amphiphilic block copolymers in which a poly(styrene) segment is connected to a poly(ethylene oxide) block via a bis‐(2,2′:6′,2″‐terpyridine‐ruthenium) complex have been intensely studied. In most cases, the micelle populations were found to be strongly heterogeneous in size because of massive micelle/micelle aggregation. In the study reported in this article we tried to improve the homogeneity of the micelle population. The variant preparation procedure developed, which is described here, was used to prepare two “protomer”‐type micelles: PS₂₀‐[Ru]‐PEO₇₀ and PS₂₀‐[Ru]‐PEO₃₇₅. The dropwise addition of water to a solution of the compounds in dimethylformamide was replaced by the controlled addition of water by a syringe pump. The resulting micelles were characterized by sedimentation velocity and sedimentation equilibrium analyses in an analytical ultracentrifuge and by transmission electron microscopy of negatively stained samples. Sedimentation analysis showed virtually unimodal size distributions, in contrast to the findings on micelles prepared previously. PS₂₀‐[Ru]‐PEO₇₀ micelles were found to have an average molar mass of 318,000 g/mol (corresponding to 53 protomers per micelle, which is distinctly less than after micelle preparation by the standard method) and an average hydrodynamic diameter (d_h) of 18 nm. For PS₂₀‐[Ru]‐PEO₃₇₅ micelles, the corresponding values were M = 603,000 g/mol (31 protomers per micelle) and d_h = 34 nm. The latter particles were found to be identical to the “equilibrium” micelles prepared in pure water. Both micelle types had a very narrow molar mass distribution but a much broader distribution of s values and thus of hydrodynamic diameters. This indicates a conformational heterogeneity that is stable on the time scale of sedimentation velocity analysis. The findings from electron microscopy were in disagreement with those from the sedimentation analysis both in average micelle diameter and in the width of the distributions, apparently because of imperfections in the staining procedure. The preparation procedure described also may be useful in micelle formation from other types of protomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4458–4465, 2004     

Solid-State Thin-Film Sensors Based on Chalcogenide Materials Obtained by Planar Technology and Pulsed Laser Deposition

Methods of silicon planar technology and pulsed laser deposition were applied to fabricate fully solid-state chemical sensors for determining ions of copper, lead, cadmium, thallium, and also sulfide and chloride ions on the basis of thin chalcogenide films as ion-sensitive membranes.     

Applications of density functional theory methods in millimeter‐wave spectroscopy

Density functional theory (DFT), using the most common functionals, and ab initio quantum chemistry methods are used to calculate the rotational constants and dipole moments of the astrophysically important molecules HCN, CH₃CN, CH₃CNH⁺, HCCCN, and HCCNC. As far as millimeter‐wave spectroscopy is of interest the DFT methods performed well with most functionals, giving results within ±1% of experiments for rotational constants and ±3% for dipole moments. Analyzing the results obtained with all theoretical models, it may be concluded that the Becke's three‐parameter exchange functional and the gradient‐corrected functional of Lee, Yang, and Paar (B3LYP) and Becke's three‐parameter functional with Perdew–Wang correlational functional [B3PW91/6‐31G(d, p)] give the best performances. A detailed analysis of the electron correlation effects shows that HCCCN is more stable than is HCCNC, by 1.16 eV, with important contribution arising from triple excitations. This result is also compared with those obtained with DFT methods. Despite occasional difficulties, DFT with the currently available functionals are of great utility in quickly assessing spectroscopic parameters of astrophysical interest. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Temperature and modulation characteristics of resonant-cavitylight-emitting diodes

Resonant-cavity light-emitting diodes (RCLED) are novel, high-efficiency light-emitting diodes which employ optical microcavities. These diodes have higher intensities and higher spectral purity as compared to conventional LEDs. Analytical formulas are derived for the enhancement of the spontaneous emission along the optical axis of the cavity. The design rules for high-efficiency operation of RCLEDs are established. The temperature dependence of the emission intensity is analyzed in the range 20-80° and it is described by an exponential dependence with a characteristic temperature of 112 K. The modulation characteristics of RCLEDs exhibit 3 dB frequencies of 580 MHz. Eye diagrams at transmission rates of 622 Mb/s are wide open indicating the suitability of RCLEDs for high-speed data transmission     

Über Effekte zweiter Ordnung bei Biegung und Torsion dünnwandiger Rohre elliptischen Querschnitts

Zusammenfassung Mittels einfacher Gleichgewichtsbetrachtungen wird gezeigt, daÜ bei der Biegung eines dünnwandigen Rohres von elliptischem Querschnitt neben den Längsspannungen der elementaren Biegungstheorie auch Biegungsspannungen auftreten, deren EinfluÜ bei geringer Wandstärke im Vergleich zu den Ellipsenachsen nicht zu vernachlässigen ist, vor allem wegen der Verformung des Querschnitts, den sie zur Folge haben. Diese Abplattung der Ellipse wird mit Hilfe des Castiglianoschen Satzes berechnet. Bei den zusätzlichen Biegungsspannungen und der zugeordneten Deformation handelt es sich um Effekte zweiter Ordnung, die eine Verminderung der Sicherheit gegen Einbeulen der Rohre verursachen. Entsprechende Betrachtungen werden für die Torsion angestellt, wobei gleichartige Ergebnisse erzielt werden. Die Aussage über die Herabsetzung der Instabilitätsgrenze ist nur qualitativer Art. Es wird eine einfache Anwendung auf das Bourdonsche Manometer gebracht und dabei die Erklärung der Tatsache gegeben, daÜ eine Röhrenfeder in den Endpunkten der groÜen Achse ihres Querschnittes zuerst aufreiÜt.Der Verfasser dankt Herrn Prof.L. Föppl für die Anregung dieser Arbeit, sowie für die überlassung der Gleichungen (25), (27), (36) aus unveröffentlichten Arbeiten.     

Metallo‐supramolecular micelles: Studies by analytical ultracentrifugation and electron microscopy

In aqueous solutions, amphiphilic block copolymers in which a polystyrene (PS) segment is connected to a poly(ethylene oxide) (PEO) block via a bis(2,2′:6′,2″‐ terpyridine ruthenium) complex can form micelles. Such micelles of the protomer type PS₂₀‐[Ru]‐PEO₇₀, according to the preparation procedure representing frozen micelles, were studied by sedimentation velocity and sedimentation equilibrium analysis in an analytical ultracentrifuge and by transmission electron microscopy, with different techniques applied for the sample preparation. The particles obtained were surprisingly multifarious in size. In ultracentrifugation experiments performed at relatively low salt concentrations, the distributions of the sedimentation coefficient s_20,w showed a pronounced peak at 9.6 S and a broad, only partly separated second peak around 14 S. The molar mass of the particles at the peak was around 430,000 g/mol, corresponding to an aggregation number of approximately 85. The average hydrodynamic diameter of the particles in the peak fraction was approximately 13 nm. In electron micrographs of negatively stained samples, spheres of diameters between 10 and 25 nm were the most abundant particles, but larger ones with a wide size range were also visible. The latter particles apparently were composed of smaller ones. The data from both sedimentation analysis and electron microscopy showed that (1) the studied compound formed primary micelles of diameters around 20 nm and (2) the primary micelles had a tendency toward aggregation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3159–3168, 2003     

Application of enzyme-field effect transistor sensor arrays as detectors in a flow-injection analysis system for simultaneous monitoring of medium components. Part II. Monitoring of cultivation processes

Glucose, maltose, sucrose, lactose, ethanol and urea concentrations were monitored simultaneously during the cultivation of Escherichia coli and Saccharomyces cerevisiae by means of enzyme field effect transistors (EnFETs) applying glucose dehydrogenase (GDH), maltase (MAL)/GDH, invertase (INV)/GDH, β-galactosidase (β-GAL)/galactosedehydrogenase (GALDH), alcoholdehydrogenase (ADH)/aldehydedehydrogenase (ALDH), and urease. These enzymes were (co)immobilized on the pH sensitive gates of an eight-FET array. The FET array was integrated in a commercial FIA system.