Effects of poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] on the charge distributions of low‐density polyethylene/polystyrene blends

The effect of the triblock copolymer poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS) on the formation of the space charge of immiscible low‐density polyethylene (LDPE)/polystyrene (PS) blends was investigated. Blends of 70/30 (wt %) LDPE/PS were prepared through melt blending in an internal mixer at a blend temperature of 220 °C. The amount of charge that accumulated in the 70% LDPE/30% PS blends decreased when the SEBS content increased up to 10 wt %. For compatibilized and uncompatibilized blends, no significant change in the degree of crystallinity of LDPE in the blends was observed, and so the effect of crystallization on the space charge distribution could be excluded. Morphological observations showed that the addition of SEBS resulted in a domain size reduction of the dispersed PS phase and better interfacial adhesion between the LDPE and PS phases. The location of SEBS at a domain interface enabled charges to migrate from one phase to the other via the domain interface and, therefore, resulted in a significant decrease in the amount of space charge for the LDPE/PS blends with SEBS. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2813–2820, 2004     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Vertex-based inter-frame boundary encoding scheme

The boundary is approximated by a polygon which can be encoded with the smallest number of bits for maximum distortion. The temporal redundancy between two successive frames is efficiently removed with the proposed scheme, resulting in a lower bit rate than the conventional algorithms     

Prioritizing telecommunications technologies for long-range R&D planning to the year 2006

This paper concerns telecommunications technologies prioritization for long-range R&D planning at the Korea Telecommunication Authority (KTA), which is the primary common carrier in Korea. Criteria weighting and technological importance ranking were determined by means of the Analytic Hierarchy Process as a decision aid, along with hierarchical representation and pairwise comparisons. The opinions derived from three divisions of KTA were analyzed and aggregated. Such aggregated prioritization weighting of technologies allows the corporation management to use it for funding decisions about technological aspects of its long-range planning for R&D projects during the period from 1992 to 2006; especially those concerning baseline budget level selection and the scope of research activities.<>     

Proof of semialgebraic covering mapping cylinder conjecture with semialgebraic covering homotopy theorem

In this paper we prove the semialgebraic version of Palais' covering homotopy theorem, and use this to prove Bredon's covering mapping cylinder conjecture positively in the semialgebraic category. Bredon's conjecture was originally stated in the topological category, and a topological version of our semialgebraic proof of the conjecture answers the original topological conjecture for topological G-spaces over “simplicial” mapping cylinders.     

Vertical bridgman techniques to homogenize zinc composition of CdZnTe substrates

In order to improve the Zn homogeneity along the axial direction of CdZnTe boule, we have employed a modified Bridgman technique using a (Cd, Zn) alloy source in communication with the melt, whose temperature has been gradually changed from 800 to 840°C during growth. Electron probe microanalysis (EPMA) measurements of Zn composition in the boule shows an excellent homogeneity of Zn along the axis of the CdZnTe boule compared with results in a boule grown by using a fixed source temperature. We have performed a numerical simulation to obtain the approximate temperatures of additional heating and cooling needed to improve the radial Zn homogeneity. CdZnTe boule has been grown by seeded vertical Bridgman furnace with two zones of heater and cooler. Ultraviolet/visible spectroscopic measurements of Zn composition over the length of the boule indicate that the radial distribution of Zn composition is very homogeneous in the body region of the boule, where the radial variation of Zn composition is ±0.0005.     

Determination of Dextromethorphan and its Metabolite Dextrorphan in Human Hair by Gas Chromatography–Mass Spectrometry

An analytical method has been developed for determination of dextromethorphan (DMP) and dextrorphan (DRP) in human hair by gas chromatography–mass spectrometry (GC–MS). Hair samples (30 mg) were washed with distilled water and acetone and cut into small fragments (<1 mm) before extraction with methanol. The extracts were evaporated to dryness and then derivatized by use of BSTFA containing 1% TMCS, for preparation of the trimethylsilyl (TMS) derivative of DRP. The extract (1 μL) was then injected into the GC–MS. Recoveries of DMP and DRP at 7.0 and 22.5 ng mg^?1 were in the range 90.6–97.2% with intra-assay and inter-assay precision of less than 5.7% and 4.7%, respectively. LOD and LOQ were, respectively, 0.67 and 2.13 ng mg^?1 for DMP and 0.14 and 0.47 ng mg^?1 for DRP. The responses were linear with correlation coefficients (r > 0.9995) for the drugs studied. The applicability of the method was proven by analysis of authentic hair samples.