Relieving effect of saline on cephaloridine nephrotoxicity in rats

To elucidate the mechanism(s) of the relieving effect of saline on cephaloridine (CER) nephrotoxicity, rats were given CER in equal quantity (1 g/kg body weight; i.v.), but at two different concentrations (4 and 25%) in saline. Urinary excretion of glucose, which was investigated as an index for renal proximal tubular injury, revealed that the renal damage was less in the 4% CER 25 ml/kg group than in the 25% CER 4 ml/kg group. As to urinary excretions of CER, sodium, potassium and water, no significant differences were observed between the two groups in the first 2 h, but chloride in the 4% CER 25 ml/kg group showed higher values than in the 25% CER 4 ml/kg group. Plasma concentrations of sodium, potassium, chloride and CER, did not show any definite distinctions between the two groups. At the time-point of 20 min after the CER administration, renal CER content was significantly lower in the 4% CER 25 ml/kg group than in the 25% CER 4 ml/kg group. These results suggest that the sodium ion which is needed for cellular trapping of CER is competitively expended for cellular entry of the chloride ion in the kidney, and that the relieving effect of the saline on CER nephrotoxicity is ascribable to the loaded quantity of chloride ion.     

A highly diastereoselective pinacol coupling reaction of aldehydes and ketones using low-valence niobium generated from Nb(V)

A simple method for the diastereoselective synthesis of racemic 1,2-diol mediated by low-valence niobium generated in situ is described. A 1,4-dioxane-toluene solvent system was found to be essential to achieve higher selectivities and to prevent other reactions of pinacols, such as deoxygenation and acetal formation. Aromatic aldehydes and ketones were converted to the corresponding pinacols with up to 97 and 85% de, respectively.     

A highly rigid diamine monomer derived from naturally occurring myo‐inositol and its use for polyamide synthesis

A rigid diamine was synthesized from myo‐inositol, a naturally occurring cyclic hexaol, and used as a monomer to synthesize polyamides. myo‐Inositol was treated with 1,1‐dimethoxycyclohexane to yield a bisketal bearing two hydroxyl groups, and from this bisketal, the target diamine was synthesized in three steps: (1) derivation of the diol into the corresponding bistriflate, (2) nucleophilic substitution of the bistriflate with sodium azide yielding a diazide, and (3) reduction of the diazide to the target diamine. The target diamine readily underwent polycondensation with dicarboxylic acid chloride in solution. The resulting polyamides, whose main chain inherited the rigid 5‐6‐5 system from the diamine monomers, have high glass transition temperatures. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3436–3443     

Synthesis and reversible hydration–dehydration system of copolymers bearing a vicinal tricarbonyl structure

Novel copolymers composed of a styrene (St) derivative bearing a vicinal tricarbonyl moiety and various vinyl monomers such as St, methyl methacrylate (MMA), and N‐vinylpyrrolidone (NVP) were synthesized by (1) radical copolymerization of a St derivative with a 1,3‐diketone structure with St, MMA, and NVP and (2) successive oxidation of the resulting copolymers with N‐bromosuccinimide in DMSO to convert their 1,3‐diketone moieties in the side chains into the corresponding vicinal tricarbonyl moieties. Their tricarbonyl moieties were readily hydrated in water‐containing acetone to generate the corresponding copolymers bearing geminal diol structures in the side chains. On the other hand, heating the resulting copolymers bearing the geminal diol structures in vacuo‐enabled successful recovery of the vicinal tricarbonyl moieties to demonstrate the reversible nature of this system. The hydration behavior in powdery state under air atmosphere saturated by water was also investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of oligo(spiroketal)s by polycondensation of silyl ethers derived from naturally occurring myo‐inositol with 1,4‐cyclohexanedione

Oligo(spiroketal)s (OSKs) were synthesized from myo‐inositol, a naturally occurring cyclic compound bearing six hydroxyl groups. The successful synthesis of OSKs was achieved using silyl ethers 2 derived from 1,4‐di‐O‐alkylated myo‐inositol 1 as monomers, which underwent polycondensation with 1,4‐cyclohexanedione (CHD) at 0 °C in the presence of trimethylsilyl triflate as a catalyst. Because of the irreversible nature of the condensation reaction of silyl ethers with ketones, the resulting OSKs 7 had higher molecular weights than previously reported OSKs that were obtained by polycondensation of tetraols 1 with CHD, where backward hydrolysis of the ketal functions occurred. In addition, another series of OSKs, 8, were synthesized using silyl ethers 3 derived from 2,5‐di‐O‐alkylated myo‐inositol 6 , which are more symmetric monomers than silyl ethers 2 . Silyl ethers 3 underwent efficient polycondensation with CHD, whereas tetraol 6 did not, demonstrating that the derivation of such tetraols into the corresponding silyl ethers is a powerful strategy to access OSKs. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2407–2414     

Partially bio‐based tri‐ and hexaallyl monomers: Synthesis from naturally occurring myo‐inositol and polyaddition with dithiols

myo‐Inositol, a naturally occurring cyclic hexaol, was converted to 2,4,6‐tri‐O‐allyl‐myo‐inositol and 1,2,3,4,5,6‐hexa‐O‐allyl‐myo‐inositol. Polyaddition of the former product, a tri(allyl ether) bearing three hydroxyl groups, with dithiols yielded the corresponding networked polymers. Their glass transition temperatures (T_gs) were higher than those of networked polymers formed by the polyaddition of 1,3,5‐tri‐O‐methyl‐2,4,6‐tri‐O‐allyl‐myo‐inositol. This implied the reinforcement of the networks by hydrogen bonding between the hydroxyl groups. Polyaddition of the latter product, a hexa(allyl ether), with dithiols yielded the corresponding networked polymers with much higher T_gs than those of all of the aforementioned networked polymers. This implied that efficient use of the hexafunctional monomer leads to the formation of more densely crosslinked polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1524–1529     

Functional 1,3‐benzoxazine bearing 4‐pyridyl group: Synthesis and thermally induced polymerization behavior

1,3‐benzoxazine 1 , bearing 4‐pyridyl moiety on the nitrogen atom, was synthesized from p‐cresol, 4‐aminopyridine, and paraformaldehyde. The efficient synthesis was achieved by adding acetic acid to suppress the strong basicity caused by the presence of 4‐aminopyridine derivatives. Upon heating 1 at 180 °C, it underwent the thermally induced ring‐opening polymerization. The resulting polymer was composed of two types of repeating unit, i.e., (1) Mannich‐type one (‐phenol‐CH₂‐NR‐CH₂‐) that can be expected from the general ring‐opening polymerization of conventional benzoxazines and (2) a typical phenolic resin‐type one (‐phenol‐CH₂‐phenol‐) induced by release of 4‐aminopyridine and paraformaldehyde (unit B). Another structural feature of the polymer was that it possessed a benzoxazine moiety at the chain end. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 410–416     

Low threshold current operation of self-assembled InAs/GaAs quantum dot lasers by metal organic chemical vapour deposition

Low threshold current operation of self-assembled InAs/GaAs quantum dot lasers grown by metal organic chemical vapour deposition is reported. Continuous-wave lasing at room temperature with low threshold current (6.7 mA) was achieved at the wavelength of 1.18 /spl mu/m. The threshold current of 6.7 mA is the lowest value so far achieved in quantum dot lasers grown by metal organic chemical vapour deposition. Comparison with photoluminescence spectra indicates that the observed lasing originates from the ground state of InAs quantum dots.     

The dynamic behavior of magnetic fluid adsorbed to small permanent magnet in alternating magnetic field

The dynamic behavior of a magnetic fluid adsorbed to a small NdFeB permanent magnet subjected to an alternating magnetic field was studied with a high speed video camera system. The directions of alternating magnetic field are parallel and opposite to that of the permanent magnet. It was found that the surface of magnetic fluid responds to the external alternating magnetic field in elongation and contraction with a lot of spikes. Generation of a capillary magnetic fluid jet was observed in the neighbourhood of a specific frequency of alternating field. The effect of gravitational force on surface phenomena of magnetic fluid adsorbed to the permanent magnet was revealed.