Photophysical studies on binding of curcumin to bovine serum albumins

The excited-state photophysical properties of curcumin in the presence of bovine serum albumin (BSA) have been studied. The absorption and fluorescence changes in curcumin on binding to BSA have been followed at varying concentrations of either curcumin or BSA to determine the binding constant, which has been found to be approximately 10(4) to 10(5) M(-1). Stopped-flow kinetics studies suggested at least two distinct kinetic steps for the binding of curcumin to BSA. The photophysical properties of the singlet-excited state of the curcumin-BSA complex have also been studied. Whereas the absorption spectrum of curcumin is redshifted, the fluorescence spectrum of curcumin was blueshifted in the presence of BSA. The fluorescence quantum yield of curcumin on complexing with BSA was approximately 0.05. Steady-state fluorescence anisotropy studies showed a significant increase in the anisotropy value of 0.37 in BSA-bound curcumin. The fluorescence decay of the curcumin-BSA complex followed a biexponential decay with fluorescence lifetimes of 413 ps (33%) and 120 ps (67%). On the basis of these complementary results, it has been concluded that curcumin shows very high binding to BSA, probably at the hydrophobic cavities inside the protein.     

High‐performance liquid chromatographic enantioseparation of (RS)‐bupropion using isothiocyanate‐based chiral derivatizing reagents

A high‐performance liquid chromatographic (HPLC) method for enantioseparation of bupropion was developed using two isothiocyanate‐based chiral derivatizing reagents, (S)‐1‐(1‐naphthyl) ethyl isothiocyanate, (S)‐NEIT, and (R)‐α‐methyl benzyl isothiocyanate, (R)‐MBIT. The diastereomers synthesized with (S)‐NEIT were enantioseparated by reversed‐phase HPLC using gradient elution with mobile phase containing water and acetonitrile, whereas diastereomers synthesized with (R)‐MBIT were enantioseparated using triethyl amine phosphate buffer and methanol. Derivatization conditions were optimized and the method was validated for accuracy, precision and limit of detection. The limit of detection was found to be 0.040–0.043 µg/mL for each of the diastereomers prepared with (S)‐NEIT. Copyright © 2013 John Wiley & Sons, Ltd.     

Bioactive Penta-Coordinated Diorganotin(Iv) Complexes of Pyridoxalimine Schiff Bases

Abstract

Diorganotin(IV) complexes of an extended system derived from the condensation of pyridoxal hydrochloride with 2-amino phenol (H₂L¹), 2-amino-4-methyl phenol (H₂L²), 2-amino-4-chloro phenol (H₂L³), 2-amino-4-nitro phenol (H₂L⁴), 1-amino-2-naphthol hydrochloride (H₂L⁵) have been synthesized by the reaction of dichlorodiorganotin(IV) in a 1:1 molar ratio with these ligands. Spectral studies (IR, ¹H, ¹³C, ¹¹⁹Sn NMR) along with physical data evidenced the formation of penta-coordinated species with the ligands acting as tridentate (ONO) with oxygen occupying the axial positions, and nitrogen at one of the equatorial positions. The ligands and their organotin complexes have been evaluated for antimicrobial activity against phytopathogenic fungi Candida albicans and Aspergillus niger at 25 ± 1 °C and bacteria Bacillus subtilis, Escherichia coli, and Staphylococcus aureus at 37 ± 1 °C. The activities of the ligands have been enhanced on complexation and the results indicate that they exhibit significant antimicrobial properties.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Novel,Mild, and Highly Efficient Method for the Synthesis of 2-Arylbenzothiazoles by the Oxidation of 2-Arylbenzothiazolines with Silicon Lewis Acids

Oxidation of structurally diverse 2-arylbenzothiazolines to give the corresponding 2-arylbenzothiazoles has been carried out in benzene using dimethyldichlorosilane and trimethylchlorosilane. Short reaction times, mild reaction conditions, easy and quick isolation of the products, and excellent yields are the main advantages of this procedure.     

An Efficient Method for Agrobacterium-Mediated Genetic Transformation and Plant Regeneration in Cumin (Cuminum cyminum L.)

Cumin is an annual herbaceous medicinally important plant having diverse applications. An efficient and reproducible method of Agrobacterium-mediated genetic transformation was herein established for the first time. A direct regeneration method without callus induction was optimised using embryos as explant material in Gamborg’s B5 medium supplemented with 0.5-μM 6-benzyladenine and 2.0-μM α-naphthalene acetic acid. About 1,020 embryos (a mean of 255 embryos per batch) were used for the optimisation of transformation conditions. These conditions were an Agrobacterium cell suspension of 0.6 OD₆₀₀, a co-cultivation time of 72 h, 300-μM acetosyringone and wounding of explants using a razor blade. Pre-cultured elongated embryos were treated using optimised conditions. About 720 embryos (a mean of 180 embryos per batch) were used for transformation and 95 % embryos showed transient β-glucuronidase expression after co-cultivation. Putative transformed embryos were cultured on B5 medium for shoot proliferation and 21 regenerated plants were obtained after selection and allowed to root. T₀ plantlets showed β-glucuronidase expression and gene integration was confirmed via PCR amplification of 0.96 and 1.28 kb fragments of the hygromycin-phosphotransferase II and β-glucuronidase genes, respectively. In this study, a transformation efficiency of 1.5 % was demonstrated and a total of 11 transgenic plants were obtained at the hardening stage, however, only four plants acclimatised during hardening. Gene copy number was analysed by Southern blot analysis of hardened plants and single-copy gene integration was observed. This is the first successful attempt of Agrobacterium-mediated genetic transformation of cumin.     

Organotin (IV) complexes derived from tridentate Schiff base ligands: Synthesis,spectroscopic analysis,antimicrobial and antioxidant activity

Organotin complexes of Schiff bases (derived from the condensation of hydrazides with salicylaldehyde derivatives) were prepared and their characterization was done using several spectroscopic techniques like FTIR, NMR (¹H, ¹³C, and ¹¹⁹Sn) and mass spectrometry. The spectroscopic data of the ligands and their corresponding complexes revealed that the Schiff bases chelated to the tin metal in a tridentate manner through –ONO atoms (oxygen atom of the hydroxyl group of the salicylaldehydic derivatives, the nitrogen atom of azomethine group, and the oxygen atom of enolic group present in the carboxylic acid hydrazides). Around tin atom pentacoordinated geometry was exhibited. The synthesized ligands and their complexes have been assessed for their biological potency (antibacterial, antifungal and antioxidant using Ciprofloxacin, Fluconazole and Ascorbic acid as reference compounds) and few of the compounds showed optimistic activity. The ligands having electron withdrawing group attached showed greater antimicrobial activity as compared to the other ligands. The complexes showed the better activity than the ligands. The general trend followed by the complexes was diphenyl ?> ?dibutyl ?> ?dimethyl substituted complexes. Compound 11 was the most active against microbes. The antioxidant activity increased with electron donating group. The phenyl substituted complexes showed better activity as compared to the dibutyl and dimethyl substituted complexes. Compound 20 was the best antioxidant.     

Greener approach toward synthesis of biologically active s-Triazine (TCT) derivatives: A recent update

The greener methodology to synthesize s-triazine derivatives (also known as TCT) is described, including synthesis through microwave, ultrasound, and solvent-free conditions. This review mainly focuses on reactions of TCT (2,4,6-trichloro-1,3,5-triazine) with various substituents having amine and hydroxy functionalities to give corresponding triazine derivatives under a greener approach. The results of reactions indicate that, unlike classical methods, green methods result in better yields of the product, through a rapid reaction, under mild reaction conditions, and by easy workup procedures.     

Polycaprolactone solution–based ink for designing microfluidic channels on paper via 3D printing platform for biosensing application

This work reports a novel fabrication technique for development of channels on paper‐based microfluidic devices using the syringe module of a 3D printing syringe–based system. In this study, printing using polycaprolactone (PCL)‐based ink (Mw 70 000‐90 000) was employed for the generation of functional hydrophobic barriers on Whatman qualitative filter paper grade 1 (approximate thickness of 180 μm and pore diameter of 11 μm), which would effectively channelize fluid flow to multiple assay zones dedicated for different analyte detection on a microfluidic paper‐based analytical device (μPAD). The standardization studies reveal that a functional hydrophilic channel for sample conduction fabricated using the reported technique can be as narrow as 460.7 ± 20 μm and a functional hydrophobic barrier can be of any width with a lower limit of about 982.2 ± 142.75 μm when a minimum number of two layers of the ink is extruded onto paper. A comparison with the hydrodynamic model established for writing with ink is used to explain the width of the line printed by this system. A fluid flow analysis through a single channel system was also carried out to establish its conformity with the Washburn model, which governs the fluid flow in two‐dimensional μPAD. The presented fabrication technique proves to be a robust strategy that effectively taps the advantages of this 3D printing technique in the production of μPADs with enhanced speed and reproducibility.     

Cobalt(II) Complex Catalysed Epoxidation with Molecular Oxygen

Cobalt(II) complexes 1 or 2, catalyses the epoxidation of alkenes in the presence of molecular oxygen and 2-methylpropanal in high yields.