The effects of nonlocal impact ionization on the speed of avalanche photodiodes

The nonlocal enhancement in the velocities of charge carriers to ionization is shown to outweigh the opposing effects of dead space, increasing the avalanche speed of short avalanche photodiodes (APDs) over the predictions of a conventional local model which ignores both of these effects. The trends in the measured gain-bandwidth product of two short InAlAs APDs reported in the literature support this result. Relatively large speed benefits are predicted to result from further small reductions in the lengths of short multiplication regions.     

Impact of power control and lognormal shadowing on the mean transmit power of Bluetooth devices

This letter analyzes Bluetooth's power-control algorithm with a goal to study the mean transmit power required in the presence of lognormal shadowing. The following results are found. 1) A smaller power-control step size yields a lower mean transmit power. 2) When the standard deviations of lognormal shadowing are 3 and 6 dB, respectively, a Bluetooth device needs to consume 11.1 dB and 15.0 dB more in the transmit energy than the minimum one required in the absence of shadowing. 3) The transmit energy consumption varies by around 6 dB among Bluetooth devices as a result of the /spl plusmn/6 dB tolerance in the golden receive power range, which has a nominal size of 20 dB.     

激光熔覆Ni基SiC合金涂层组织与性能的研究

利用5kWCO2连续波激光器在16Mn钢基材表面对含20%(体积比)SiC陶瓷粉末的镍基自熔性合金粉末进行激光熔覆得到Ni基SiC合金涂层(NiSiC)。研究了合金涂层的组织形貌及相结构,并用单纯的镍基合金涂层(Ni60)进行了显微硬度及滑动磨损性能的对比试验。结果表明,NiSiC合金涂层由γ枝晶及其间的共晶组织组成,主要组成相为γ-Ni,γ-(Ni,Fe)固溶体和(Cr,Fe)7C3,Cr23C6及(Cr,Si)3Ni3Si等化合物。添加SiC的镍基合金涂层NiSiC比单纯的镍基合金涂层Ni60具有较高的硬度和耐磨性。     

On the orthogonality of natural modes of vibration

The natural modes of a discrete linear system are orthogonal with respect to the mass and stiffness matrices in a generalized sense. However, these modes are usually not orthogonal to each other in the ordinary sense. The purpose of this paper is to document a number of conditions under which the modes are also orthogonal in an ordinary fashion.     

行波管内不连续性的简易模型分析

 根据行波管内微波信号在输能装置和切断衰减器处两个不连续性之间来回反射的物理现象，建立行波管输出段的简易网络串模型，并对行波管输出段传输特性参数的幅频特性、相频特性进行计算分析。结果表明：输能装置和切断衰减器的不连续性是造成幅相一致性行波管相位不可补偿的重要因素之一。     

A Characterisation of Posets that Are nearly Antichains

We present a characterisation of posets of size n with linear discrepancy n − 2. These are the posets that are “furthest” from a linear order without being an antichain. This revised version was published online in September 2006 with corrections to the Cover Date.     

Invariant ideals of twisted crossed products

We will prove a result concerning the inclusion of non-trivial invariant ideals inside non-trivial ideals of a twisted crossed product. We will also give results concerning the primeness and simplicity of crossed products of twisted actions of locally compact groups on -algebras. Received: 25 January 2002; in final form: 22 May 2002/Published online: 2 December 2002 This work is partially supported by Hong Kong RGC Direct Grant.     

Anatomically constrained electrical impedance tomography forthree-dimensional anisotropic bodies

As shown previously for two-dimensional geometries, anisotropy effects should not be ignored in electrical impedance tomography (EIT) and structural information is important for the reconstruction of anisotropic conductivities. Here, we describe the static reconstruction of an anisotropic conductivity distribution for the more realistic three-dimensional (3-D) case. Boundaries between different conductivity regions are anatomically constrained using magnetic resonance imaging (MRI) data. The values of the conductivities are then determined using gradient-type-algorithms in a nonlinear-indirect approach. At each iteration, the forward problem is solved by the finite element method. The approach is used to reconstruct the 3-D conductivity profile of a canine torso. Both computational performance and simulated reconstruction results are presented together with a detailed study on the sensitivity of the prediction error with respect to different parameters. In particular, the use of an intracavity catheter to better extract interior conductivities is demonstrated     

漫谈金属探测器

提起金属探测器（Metal Detector），人们就会联想到探雷器，工兵用它来探测掩埋的地雷．金属探测器是一种专门用来探测金属的仪器，除了用于探测有金属外壳或金属部件的地雷之外，还可以用来探测隐蔽在墙壁内的电线、埋在地下的水管和电缆，甚至能够地下探宝，发现埋藏在地下的金属物体．目前还广泛应用于各种大型会议中心、会展场馆、体育场馆、公检法、监狱系统及娱乐场所的安全检查和工厂企业的防偷窃检查，甚至用于对高考禁带物品的检查．本文就来谈谈金属探测器的发展历史和工作原弹．