The role of adiponectin in the production of IL-6, IL-8, VEGF and MMPs in human endothelial cells and osteoblasts: implications for arthritic joints

This study was performed to evaluate the contribution of adiponectin to the production of interleukin (IL)-6, IL-8, vascular endothelial growth factor (VEGF), matrix metalloproteinase (MMP)-1 and MMP-13 in human endothelial cells and osteoblasts in arthritic joints. Cultured human umbilical vascular endothelial cells (HUVECs) and osteoblasts were stimulated with adiponectin (1 or 10 μg ml⁻¹) or IL-1β (0.1 ng ml⁻¹) in the presence or absence of hypoxia for 24 h. The protein expression patterns were examined by analyzing culture supernatants using the enzyme-linked immunosorbent assay (ELISA). Adiponectin significantly stimulated the production of VEGF, MMP-1 and MMP-13 in osteoblasts but not in endothelial cells, whereas it significantly stimulated the production of IL-6 and IL-8 in both endothelial cells and osteoblasts. The increase in VEGF production induced by adiponectin was significantly greater than that induced by IL-1β. The production of IL-6 and IL-8 in adiponectin-stimulated endothelial cells was approximately 10-fold higher than that in IL-1β-stimulated endothelial cells; in osteoblasts, adiponectin-induced IL-6 and IL-8 secretion was approximately twofold higher than that induced by IL-1β. In addition, IL-8 production in endothelial cells was approximately sevenfold higher than in osteoblasts. However, IL-6 levels were similar between the two cell types, suggesting that adiponectin may be involved in the production of IL-8 in endothelial cells, which may have an important role in neutrophil recruitment to arthritic joints. Furthermore, the increases in protein expression induced by adiponectin were differentially regulated by hypoxia. In conclusion, adiponectin has a more important role than does IL-1β in the production of mediators that drive synovitis and joint destruction in endothelial cells and osteoblasts at physiological concentrations.     

Synthesis of window glazing coated with silica aerogel films via ambient drying

An ambient drying process (1 atm, 270 °C) has been developed in order to synthesize window glazing coated with silica aerogel films. The aerogel film could be manufactured by this process of wet gel films obtained via a dip-/spin-coating of the silica sol on a glass slide. Before drying, the isoproponol solvent in wet gels was exchanged with n-heptane to minimize the drying shrinkage. The thickness, refractive index, and porosity of silica films were 0.16–10 μm, 1.08–1.09, and 80–84%, respectively. The transmittance of window glazing was over 90% and we could predict that the optimal thermal conductivity (0.2 W/(m K)) of the window glazing would be obtained at the aerogel thickness of 100 μm (0.016 W/(m K)).     

Multilevel voltage wave-shaping display driver for AC plasma display panel application

A new sustainer circuit with multilevel voltage wave-shaping characteristics for an AC plasma display panel (AC-PDP) drive is proposed. The proposed circuit features half the device voltage stresses and significantly reduced power losses compared with those of the conventional ones. This circuit, realizable without much increased cost of the semiconductor devices, gives a significant improvement in the power efficiency, essential for the design of a drive circuit for the AC-PDP. A comparative analysis and experimental results are presented to show the validity of the proposed sustainer circuit.     

Input Noise Immunity of Multilayer Perceptrons

In this paper, the robustness of the artificial neural networks to noise is demonstrated with a multilayer perceptron, and the reason of robustness is due to the statistical orthogonality among hidden nodes and its hierarchical information extraction capability. Also, the misclassification probability of a well-trained multilayer perceptron is derived without any linear approximations when the inputs are contaminated with random noises. The misclassification probability for a noisy pattern is shown to be a function of the input pattern, noise variances, the weight matrices, and the nonlinear transformations. The result is verified with a handwritten digit recognition problem, which shows better result than that using linear approximations.     

Jitter and clock recovery for periodic traffic in broadband packetnetworks

The transparent transport of real-time periodic traffic through a broadband packet network requires the recovery of source clock frequency at the destination. The arriving packet stream at the destination buffer contains the source clock frequency information, which can be recovered by monitoring the buffer level, and using it to adjust the destination clock frequency without buffer under- or overflow. However, the inherently stochastic nature of packet transport in a broadband packet network makes the recovery difficult. The authors illustrate the packet jitter phenomenon, and develop algorithms to construct the destination clock frequency such that it asymptotically follows the source clock frequency with minimal variation. They provide a systematic design procedure for the implementation of these algorithms, and apply them to a computer model of a single stage FCFS multiplexer to demonstrate their effectiveness and different design trade-offs. They also discuss the application of the algorithms to the audio and video services     

柔性有源OLED显示器制造几点技术方面的考虑

AMOLED在柔性显示领域前途似锦。LG显示展示了一款全彩4in柔性AMOLED样机,衬底为80μm厚的不锈钢薄片,曲率达到5cm弯曲半径。本文就此项柔性显示技术所面临的挑战进行了探讨．包括柔性衬底衬底的传送、如何获得特性稳定可靠的TFT以使OLED的亮度和一致性适用于此项技术的商业化推广。     

Fabrication of the flexible pentacene thin-film transistors on 304 and 430 stainless steel (SS) substrate

Flexible organic thin-film transistors (OTFT) were fabricated on 304 and 430 stainless steel (SS) substrate with aluminum oxide as a gate insulator and pentacene as an organic semiconductor. Chemical mechanical polishing (CMP) process was used to study the effect of the SS roughens on the dielectric properties of the gate insulator and OTFT characteristics. The surface roughness was decreased from 33.8 nm for 304 SS and 19.5 nm for 430 SS down to ～2.5 nm. The leakage current of the metal–insulator–metal (MIM) structure (Au/Al₂O₃/SS) was reduced with polishing. Mobility and on/off ratio of pentacene TFT with bare SS showed a wide range of values between 0.005 and 0.36 cm²/Vs and between 10³ and 10⁵ depending on the location in the substrate. Pentacene TFTs on polished SS showed an improved performance with a mobility of 0.24–0.42 cm²/Vs regardless of the location in the substrate and on/off ratio of ～10⁵. With self assembled monolayer formation of octadecyltrichlorosilane (OTS) on insulator surface, mobility and on/off ratio of pentacene TFT on polished SS was improved up to 0.85cm²/Vs and ～10⁶. I–V characteristics of pentacene TFT with OTS treated Al₂O₃/304 SS was also obtained in the bent state with a bending diameter (D) of 24, 45 or 70 mm and it was confirmed that the device performed well both in the linear regime and the saturation regime.     

New fabrication of a strained Si/Si1−yGey dual channel on a relaxed Si1−xGex virtual substrate using a Ge-rich layer formed by oxidation

This paper presents a new method of forming a Si/SiGe dual channel on a Si_0.8Ge_0.2 virtual substrate. Generally, in a CMOS process using a Si/SiGe dual channel, due to several processes involving ion-implantation, annealing and dry-etching after the deposition of the Si/SiGe dual channel, the surface can be damaged, leading to reduced electrical properties. However, if the dual channel is formed during a specific stage of the CMOS process, the defects of the dual channel can be reduced and the thermal stability will be excellent. Therefore, in this paper, a method for minimizing the defects of the dual channel is presented. This method uses the segregation of the Ge in the oxidation process of a SiGe. A Si/SiGe dual channel formed using this method achieved results that were identical to a dual channel deposited using the chemical vapor deposition (CVD) method.     

Synthesis of perpendicular nanorod arrays with hierarchical architecture and water slipping superhydrophobic properties

The utilization of vertically aligned smooth gold nanorod arrays with and without nanoporous tip architectures as superhydrophobic surfaces is described. Nanoporous architecture was produced on the tips of nanorods by selectively dissolving less noble components from the alloy nanorods. The resulting nanoscopic dual-size roughness features enhanced the surface dewettability after surface modification with low-surface-energy materials such as long-chain normal alkanethiols and fluorinated organic compounds. The surface cleaning properties were also tested with a rolling water droplet.     

SIRT1 promotes DNA repair activity and deacetylation of Ku70

Human SIRT1 controls various physiological responses including cell fate, stress, and aging, through deacetylation of its specific substrate protein. In processing DNA damage signaling, SIRT1 attenuates a cellular apoptotic response by deacetylation of p53 tumor suppressor. The present study shows that, upon exposure to radiation, SIRT1 could enhance DNA repair capacity and deacetylation of repair protein Ku70. Ectopically over-expressed SIRT1 resulted in the increase of repair of DNA strand breakages produced by radiation. On the other hand, repression of endogenous SIRT1 expression by SIRT1 siRNA led to the decrease of this repair activity, indicating that SIRT1 can regulate DNA repair capacity of cells with DNA strand breaks. In addition, we found that SIRT1 physically complexed with repair protein Ku70, leading to subsequent deacetylation. The dominant-negative SIRT1, a catalytically inactive form, did not induce deacetylation of Ku70 protein as well as increase of DNA repair capacity. These observations suggest that SIRT1 modulates DNA repair activity, which could be regulated by the acetylation status of repair protein Ku70 following DNA damage.