A Broadband Dual Circularly Polarized Compact Printed Monopole Antenna

Wireless Personal Communications - Now-a-days the most common pretentious disease is the lung cancer, which has become more prevalent in the world that primarily infects the pulmonary nodules of...     

Cut off frequency and transit time analysis of lightly doped drain (LDD) MOSFETs

Analytical model for the transconductance, cut off frequency, transit time and fringing capacitance of LDD MOSFETs is presented with a simple approach. The analysis is carried out considering the LDD device as a conventional MOSFET with a series resistance [Z.-H. Liu et al., Threshold voltage model for submicrometer MOSFETs. IEEE Trans Electron Devices 1993; ED-40: 86–94] and a simple closed form expressions for cut off frequency and transit time is obtained. The total gate capacitance, i.e. the geometric and fringing capacitance, is calculated for both LDD and non-LDD devices and lower fringing capacitance is reported in LDD devices. Lower cut-off frequencies and higher transit time are reported in LDD devices for the same channel length.     

Annealing and measurement temperature dependence of W2B5-based rectifying contacts to n-GaN

The thermal stability and measurement temperature dependence of Schottky contact characteristics on n-GaN using a W₂B₅/Ti/Au metallization scheme was studied using current-voltage (I-V), scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) measurements. The elemental profile obtained from samples annealed at 350 °C showed some titanium diffusion into the gold layer but little other difference from the as-deposited wafer. Annealing at 700 °C produced significant diffusion of titanium. The Schottky barrier height increased with anneal temperature up to 200 °C, reaching a maximum value of 0.65 eV, but decreased at higher annealing temperatures. The reverse breakdown voltage from diodes fabricated using the W₂B₅-based contacts showed a similar dependence. The reverse current magnitude was larger than predicted by thermionic emission alone. The barrier height showed only minor changes with measurement temperature up to 150 °C.     

Head-group-influenced mixed micellization of sodium deoxycholate with conventional hydrocarbon surfactants of identical hydrocarbon tails

Conductivity, viscosity, turbidity, and NMR measurements were performed over most of the mole fraction range for sodium deoxycholate (SDC) with hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl). All studies demonstrate that the mixed-micelle formation is more favorable in SDC plus HTAB rather than SDC plus HPyBr or SDC plus HPyCl mixtures. The results showed that the bulky pyridinium head groups of HPyBr or HPyCl create steric incompatibility with rigid SDC monomers in the mixed state.     

Telluro- and seleno-bridged TiIV-MII (M = Ni,Pd, Pt) heterobimetallic complexes

Summary Heterobimetallic complexes of the types [Cp₂Ti(-EAr)₂-M(dppe)] (ClO₄)₂ [(1)–(4); M, E = Ni, Te (1); Ni, Se (2); Pt, Te (3); Pt, Se (4); Ar = Ph (a), C₆H₄-4-Me (b), C₆H₄-4-OMe (c), C₆H₄-4-OEt (d)] and [Cp₂Ti(-TeAr)₂-MCl ₂] [M = Pd (5), Pt (6)] were obtained by the reactions of Cp₂Ti(EAr)₂ with M(dppe)(ClO₄)₂ and M(PhCN)₂Cl₂, respectively. While (1), (5) and (6) are stable in the solid state as well as in solution, (2)–(4) undergo dissociation to M(dppe)(EAr)₂ and Cp₂Ti(ClO₄)₂ in solution, as shown by multinuclear (³¹P{¹H},¹⁹⁵Pt{¹H}, ¹²⁵Te{¹H}) n.m.r. studies. The reaction of Cp₂Ti(SeAr)₂ with M(PhCN)₂Cl₂, however, leads to the formation of Cp₂TiCl₂ and a polymeric material [M(SeAr)₂] _n .     

A convenient synthesis of linear pyranocoumarins. Xanthyletin and 3-Phenylxanthyletin

A convenient synthesis of linear pyranocoumarins, viz., 8,8-dimethyl-2H,8H-benzo[1,2-b; 5,4-b]dipyran-2-one (xanthyletin,1) and 8,8-dimethyl-3-phenyl-2H,8H-benzo[1,2-b; 5,4-b]dipyran-2-one (3-phenylxanthyletin,2) is described. The key steps are blocking the 8-position of appropriate 7-hydroxy-2H-1-benzopyran-2-one derivatives with iodine and 1,1-dimethyl-2-propynylation followed by cyclisation.

---

Ein einfacher Syntheseweg zu linearen Pyranocumarinen. Xanthyletin und 3-Phenylxanthyletin

Zusammenfassung Es wird ein vorteilhafter Weg zur Synthese von linearen Pyranocumarinen am Beispiel von Xanthyletin und 3-Phenylxanthyletin gezeigt. Das Syntheseprinzip besteht in einer Blockierung der 8-Position des entsprechenden 7-Hydroxy-2H-1-benzopyran-2-ons mit Jod und einer 1,1-Dimethyl-2-propinylierung mit nachfolgender Cyclisierung.

     

Efficient transesterification/acylation reactions mediated by N-heterocyclic carbene catalysts

Imidazol-2-ylidenes, a family of N-heterocyclic carbenes (NHC), are efficient catalysts in the transesterification involving numerous esters and alcohols. Low catalyst loadings of aryl- or alkyl-substituted NHC catalysts mediate the acylation of alcohols with enol acetates in short reaction times at room temperature. Commercially available and more difficult to cleave methyl esters react with primary alcohols in the presence of alkyl-substituted NHC to efficiently form the corresponding esters. While primary alcohols are selectively acylated over secondary alcohols with use of enol esters as acylating agents, methyl and ethyl esters can be employed as protective agents for secondary alcohols in the presence of the more active alkyl-substituted NHC catalysts. The NHC-catalyzed transesterification protocol was simplified by generating the imidazol-2-ylidene catalysts in situ.     

Determination of ten rare-earth elements and yttrium in silicate rocks by ICP-AES without separation and preconcentration

Lanthanum, cerium, neodymium, samarium, europium, gadolinium, dysprosium, erbium, ytterbium, lutetium and yttrium have been determined in 8 international rock standards by inductively coupled plasma atomic emission spectrometry (ICP-AES) without prior ion-exchange separation and preconcentration. The results for La, Ce, Nd, Eu, Dy, Yb and Y were in good agreement with the reported values, whereas those for Sm, Gd, Er and Lu were less accurate. However, the results for Sm, Gd, Er and Lu can also be used for studies of petrogenesis.     

Infrared and Raman spectral interpretations of the ferroelectric phases of NaH3(SeO3)2 and NaD3(SeO3)2

The infrared and Raman spectra of NaH₃(SeO₃)₂ and NaD₃(SeO₃)₂ have been recorded from 24 to 300°K. The interpretation, assignments, and analysis of the spectral studies are presented on the paraelectric α phase (proton disordered), ferroelectric β phase (proton ordered) and ferroelectric γ phase (proton ordered). A discussion of a newly proposed proton-triggered phase transition mechanism and a possible origin of the hydrogen-bonded OH stretching region of KH₂PO₄-type ferroelectrics is given.