Structural,magnetic and Mössbauer spectral studies of nanosize aluminum substituted nickel zinc ferrites

Nanosize aluminum substituted nickel zinc ferrites were prepared through aerosol route and characterized using TEM, XRD, magnetic measurements and Mössbauer spectroscopy. The particle size of as obtained samples was found to be ∼10 nm which increases up to ∼85 nm upon annealing at 1200 °C. The unit cell parameter ‘a’ decreases linearly with concentration of aluminum due to the small ionic radius of aluminum. The saturation magnetization for all the samples after annealing at 1200 °C lies in the range 12.9–72.6 emu/g and decreases linearly with concentration of aluminum. Room temperature Mössbauer spectra of all as obtained samples of ferrite compositions exhibited a broad doublet suggesting super paramagnetic nature. This doublet is further resolved into two doublets and assigned to the surface region and internal region atoms of the particles. The samples annealed at 1200 °C show broad sextets, which were fitted with five sextets, indicating different local environment of both tetrahedrally and octahedrally coordinated Fe cation.     

Bounds on charged lepton mixing with exotic charged leptons

We examine the effects of mixing induced light heavy charged lepton neutral currents on the partial wave amplitude for the process l⁺l⁻ →ZZ (withl = e,μ or τ). By imposing the constraints that the amplitude should not exceed the perturbative unitarity limit at high energy (√s = Λ), we obtain bounds on light heavy charged lepton mixing parameter sin²(2θ _L ^a ) where θ _L ^a is the mixing angle of the ordinary charged lepton with its exotic partner. For Λ = 1 TeV, no bound is obtained on sin² (2θ _L ^a ) form _E < 0.69 TeV. However, sin² (2θ _L ^a ) ≤ 1.52×10⁻⁵ form _E = 5 TeV, sin² (2θ _L ^a ) ≤ 2.41 ×10⁻⁷ form _E = 10 TeV. Similarity for Λ = ∞ no bound is obtained on sin² (2θ _L ^a ) for m_E < 1.97 TeV and sin² (2θ _L ^a ) ≤ 0.15 form _E = 5 TeV and sin² (2θ _L ^a ) ≤ 3.88×10^-2 form _E = 10 TeV.     

Substituent electronic effects on the persistence and absorption spectra of (Z)-o-xylylenols. A nanosecond laser flash photolysis study

[reaction: see text] A systematic investigation on a broad set of aldehydes reveals that the lifetimes of (Z)-photoenols can be modulated by variation of the substituents. We have found that the lifetimes of (Z)-enols (in benzene) can be varied by more than 1 order of magnitude with a judicious choice of the substituents that exert mesomeric and inductive effects as, for example, in the case of pentamethylbenzaldehyde (tau = 35 ns) and dicyanomesitaldehyde (tau = 760 ns). This study thus points to the fact that the electronic factors in conjunction with hydrogen bonding stabilization can considerably broaden the uni- as well as bimolecular chemistry based on photoenolization. Further, we have shown that the photoenols exhibit dramatic shifts in their absorption properties with variation of the substituents; although the photoenols have long been considered to be colored, their absorption properties have not been heretofore comprehensively examined.     

Separation of dideoxyribonucleosides in trace amounts by automated liquid chromatography and capillary electrophoresis.

No satisfactory high-performance liquid chromatographic (HPLC) method is currently available for the separation of the major dideoxyribonucleosides (ddNs) and their derivatives. A method involving HPLC has been developed for the separation of five major ddNs [ddA, ddC, ddI, azT and 2',3'-dideoxy-2',3'-didehydrothymidine (d4T)]. Elution of the common and modified components of DNA was also examined under the selected separation conditions of HPLC. The elution characteristics of these compounds were studied using serum plasma samples spiked with ddN derivatives. In addition, capillary electrophoresis (CE) was investigated for the separation of ddNs and their derivatives. Picomolar amounts of the five major ddNs and the metabolic product of azT [5'-O-glucuronide-3'-azido-3'-deoxythymidine (Glo-azT)] were satisfactorily resolved in 10 min by using a modification of CE. The spectral properties of the ddNs were characterized under different pH conditions and compared with those of their parent deoxyribonucleosides (dNs) because these compounds are commonly measured in HPLC by their spectral properties. The spectra of ddC and ddT derivatives resemble very closely those of dC and dT, but those of ddA and ddI differ to some extent from their parent dNs. The HPLC method was extensively examined for satisfactory resolutions of these compounds. For example, an isocratic elution method, although simple, failed to resolve these compounds and ion-pair chromatography did not offer any advantage. Gradient elution involving buffered solutions and increasing amounts of an organic modifier yielded satisfactory results. Methanol appeared to be the organic modifier of choice. A reversed-phase matrix with smaller than octadecyl alkyl chains did not produce the necessary interactions. Uniform spherical beads of smaller diameter produced superior resolutions. The separation of these compounds on three commercially available columns is discussed. The separation of human plasma samples spiked with dideoxynucleoside derivatives by HPLC was accomplished in ca. 16 min. The presence of the dNs did not interfere in their separations.     

Individually addressable recessed gold microelectrode arrays with monolayers of thio-cyclodextrin nanocavities

Four, individually addressable 30 microm diameter, e-beam deposited, gold microelectrodes recessed by 6 microm were suitably spaced on a single substrate to avoid diffusional overlap between each microelectrode. The single substrate device was functionalised with thiolated alpha-, beta-, and gamma-cyclodextrin nanocavities without spacer groups to ensure close proximity of the cavities to the electrode surface. The microelectrodes were assessed in two stages. The e-beam deposited micron sized electrodes were characterized using models for recessed and inlaid microdisk electrodes. Subsequently, each individually addressable, atomically flat, micro-patterned gold electrode with thiolated CD ensembles was treated as a nanoporous electrode assembly. Theoretical and experimental results were compared using cyclic voltammetry. Atomic force microscopy was also used to characterise the modified microelectrodes. Comparisons were made with thiolated CDs deposited on macroelectrodes. This is the first report of the behaviour of immobilized CD nanocavities ensembles on atomically flat gold microelectrodes.     

Spin crossover studies in tris(N,N′-dialkyldithiocarbamato)iron(III) complexes

A series of fifteen complexes of the type [Fe(RRNCS₂)₃] with symmetric (R=R=n- C₆H₁₃, n-C₈H₁₇, CH₂–CH=;CH₂, C₆H₅, C₆H₁₁ and C₆H₅CH₂), unsymmetric (R = CH₃; R = n-C₄H₉, C₆H₁₁, C₆H₅ and R = C₂H₅; R = n-C₄H₉, C₆H₁₁, C₆H₅ and i-C₃H₇) and ring substituents (RNR=pyrrolidyl and piperidyl) have been synthesized and their magnetic moments and Mössbauer spectra recorded from room temperature (RT) to liquid nitrogen temperature (LNT). Room temperature Mössbauer spectra of all the complexes exhibit an asymmetric doublet, which could be resolved into two doublets, each corresponding to low and high spin states in equilibrium. The crystal structure of tris(N, N-diallyldithiocarbamato)iron(III) shows it to be monoclinic with trigonally distorted octahedral geometry and space group C2/c. Fe–S stretching vibrations in the far i.r. region also show equilibria, HS LS. Depending on the nature of the alkyl group substituent, variable temperature magnetic moment and Mössbauer spectral studies, all the complexes may be divided into three groups; high spin complexes exhibiting spin-crossover (⁶A_1g ²T_2g), high spin complexes exhibiting spin transition (⁶A_1g ⁴T_1g) and intermediate spin complexes showing spin transition (⁴A_1g ²T_2g). On the basis of areas of the two doublets corresponding to high and low spin states, their percent contributions were calculated. Furthermore, magnetic moments of the equilibrium mixture calculated on the basis of respective areas compare well with the experimentally determined _eff values. E_Q values for both high and low spin states show linear decrease with increasing temperature.     

Simulation of interconnect inductive impact in the presence of process variations in 90 nm and beyond

The on-chip inductive impact on signal integrity has been a problem for designs in deep-submicrometer technologies. The inductive impact increases the clock skew, max timing, and noise of bus signals. In this letter, circuit simulations using silicon-validated macromodels show that there is a significant inductive impact on the signal max timing (/spl sim/ 10% pushout versus RC delay) and noise (/spl sim/2/spl times/RC noise). In nanometer technologies, process variations have become a concern. Results show that device and interconnect process variations add /spl sim/ 3% to the RLC max-timing impact. However, their impact on the RLC signal noise is not appreciable. Finally, inductive impact in 65- and 45-nm technologies is investigated, which indicates that the inductance impact will not diminish as technology scales.     

Macrophage-Targeted Punicalagin Nanoengineering to Alleviate Methotrexate-Induced Neutropenia: A Molecular Docking,DFT, and MD Simulation Analysis

Punicalagin is the most bioactive pomegranate polyphenol with high antioxidant and free-radical scavenging activity and can potentially cure different ailments related to the cardiovascular system. The current research work was envisioned to predict the targeting efficiency of punicalagin (PG) nanoparticles to the macrophages, more specifically to bone marrow macrophages. For this, we selected mannose-decorated PLGA-punicalagin nanoparticles (Mn-PLGA-PG), and before formulating this nanocarrier in laboratory settings, we predicted the targeting efficiency of this nanocarrier by in silico analysis. The analysis proceeded with macrophage mannose receptors to be acquainted with the binding affinity and punicalagin-based nanocarrier interactions with this receptor. In silico docking studies of macrophage mannose receptors and punicalagin showed binding interactions on its surface. PG interacted with hydrogen bonds to the charged residue ASP668 and GLY666 and polar residue GLN760 of the Mn receptor. Mannose with a docking score of −5.811 Kcal/mol interacted with four hydrogen bonds and the mannose receptor of macrophage, and in PLGA, it showed a −4.334 Kcal/mol docking score. Further, the analysis proceeded with density functional theory analysis (DFT) and HOMO–LUMO analysis, followed by an extensive 100 ns molecular dynamics simulation to analyse the trajectories showing the slightest deviation and fluctuation. While analysing the ligand and protein interaction, a wonderful interaction was found among the atoms of the ligand and protein residues. This computational study confirms that this nanocarrier could be a promising lead molecule to regulate the incidence of drug-induced neutropenia. Furthermore, experimental validation is required before this can be stated with complete confidence or before human use.