Colloidal processing of polymer ceramic nanocomposite integral capacitors

Polymer ceramic composites form a suitable material system for low temperature fabrication of embedded capacitors appropriate for the MCM-L technology. Improved electrical properties such as permittivity can be achieved by efficient filling of polymers with high dielectric constant ceramic powders such as lead magnesium niobate-lead titanate (PMN-PT) and barium titanate (BT). Photodefinable epoxies as the matrix polymer allow fine feature definition of the capacitor elements by conventional lithography techniques. The optimum weight percent of dispersant is tuned by monitoring the viscosity of the suspension. The dispersion mechanism (steric and electrostatic contribution) in a slightly polar solvent such as propylene glycol methyl ether acetate (PGMEA) is investigated from electrophoretic measurements. A high positive zeta potential is observed in the suspension, which suggests a strong contribution of electrostatic stabilization. By optimizing the particle packing using a bimodal distribution and modified processing methodology, a dielectric constant greater than 135 was achieved in PMN-PT/epoxy system. Suspensions are made with the lowest PGMEA content to ensure the efficiency of the dispersion and efficient particle packing in the dried film. Improved colloidal processing of nanoparticle-filled epoxy is a promising method to obtain ultra-thin capacitor films (<2/spl mu/m) with high capacitance density and improved yield. Capacitance of 35 nF/cm/sup 2/ was achieved with the thinnest films (2.5-3.0 /spl mu/m).     

Analysis of multiple FSS screens of unequal periodicity using an efficient cascading technique

In this paper, we present an efficient cascading procedure for analyzing frequency selective surface (FSS) systems consisting of multiple FSS screens of unequal periodicity embedded in multiple dielectric layers. In this procedure, we first find a global period for the FSS system by studying the composite in its entirety. Next, we compute the scattering matrix [S] of each of the FSS subsystems for the global Floquet harmonics by applying a relationship we establish that maps the [S] matrix of the subsystem for the individual Floquet harmonics to that for the global harmonics. This mapping-cum-filling process substantially reduces the effort needed to compute the [S] matrix of a subsystem. Finally, we compute the [S] of the entire system by applying a modified cascading formulation, in which one matrix inversion step is eliminated, resulting in a reduction in the total computing resource requirement as well as time. Two numerical examples are given to illustrate the efficiency and effectiveness of the technique.     

Carbide precipitates in solution-quenched PH13-8 Mo stainless steel: A small-angle neutron scattering investigation

This paper deals with the small-angle neutron scattering (SANS) investigation on solution-quenched PH13-8 Mo stainless steel. From the nature of the variation of the functionality of the profiles for varying specimen thickness and also from the transmission electron microscopy (TEM), it has been established that the small-angle scattering signal predominantly originates from the block-like metallic carbide precipitates in the specimen. The contribution due to double Bragg reflection is not significant in the present case. The single scattering profile has been extracted from the experimental profiles corresponding to different values of specimen thickness. In order to avoid complexity and non-uniqueness of the multi-parameter minimization for randomly oriented polydisperse block-like precipitate model, the data have been analyzed assuming randomly oriented polydisperse cylindrical particle model with a locked aspect ratio.     

A microspectroscopic study of the electronic homogeneity of ordered and disordered Sr2FeMoO6

Disordered Sr₂FeMoO₆ shows a drastic reduction in saturation magnetization compared to highly ordered samples, moreover magnetization as a function of the temperature for different disordered samples shows qualitatively different behaviours. We investigate the origin of such diversity by performing spatially resolved photoemission spectroscopy on various disordered samples. Our results establish that e_xtensive electronic inhomogeneity, arising most probably from an underlying chemical inhomogeneity in disordered samples, is responsible for the observed magnetic inhomogeneity. It is further pointed out that these inhomogeneities are connected with composition fluctuations of the type Sr₂Fe_1+x Mo_1-x O₆ with Fe-rich (x > 0) and Mo-rich (x < 0) regions. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

电阻-时间线性转换电路

基于电阻的传感器,如应力规和压阻器件,常用于测量多种物理参数.对于使用数字处理器或微控制器进行数据采集和信号处理的设备来说,传感器的响应必须表现为一种适合于转换成数字格式的形式.把这类传感器的电阻变化转换成一个与之成比例的频率或时间间隔是可取的,所以你就能用一个计数器或定时器来方便地得到数字形式的输出信号.图1所示电路把传感器的电阻RS线性地转换成与之成比例的时间间隔.这一电路实际上是一个张驰振荡器,由一个电流源、一个桥式放大器、一个比较器和一个触发器组成.电流IS分成两路,分别通过R1和R2,就如同这两个电阻并联在一起一样.假定运算放大器是理想放大器,则当RX(R4+RS)大于R1R3/R2时,该电路就起一个振荡器的作用.     

Transport of surface-modified iron nanoparticle in porous media and application to arsenic(III) remediation

The surface-modified iron nanoparticles (S-INP) were synthesized, characterized and tested for the remediation of arsenite (As(III)), a well known toxic groundwater contaminant of concern. The S-INP material was fully dispersed in the aqueous phase with a particle size distribution of 2–10 nm estimated from high-resolution transmission electron microscopy (HR-TEM). X-ray photoelectron spectroscopy (XPS) revealed that an Fe(III) oxide surface film was present on S-INP in addition to the bulk zero-valent Fe⁰ oxidation state. Transport of S-INP through porous media packed in 10 cm length column showed particle breakthroughs of 22.1, 47.4 and 60 pore volumes in glass beads, unbaked sand, and baked sand, respectively. Un-modified INP was immobile and aggregated on porous media surfaces in the column inlet area. Results using S-INP pretreated 10 cm sand-packed columns containing ∼2 g of S-INP showed that 100 % of As(III) was removed from influent solutions (flow rate 1.8 mL min⁻¹) containing 0.2, 0.5 and 1.0 mg L⁻¹ As(III) for 9, 7 and 4 days providing 23.3, 20.7 and 10.4 L of arsenic free water, respectively. In addition, it was found that 100% of As(III) in 0.5 mg/L solution (flow rate 1.8 mL min⁻¹) was removed by S-INP pretreated 50 cm sand packed column containing 12 g of S-INP for more than 2.5 months providing 194.4 L of arsenic free water. Field emission scanning electron microscopy (FE-SEM) showed S-INP had transformed to elongated, rod-like shaped corrosion product particles after reaction with As(III) in the presence of sand. These results suggest that S-INP has great potential to be used as a mobile, injectable reactive material for in-situ sandy groundwater aquifer treatment of As(III).     

A numerical absorbing boundary condition for finite difference andfinite element analysis of open periodic structures

In this paper we present a novel approach to deriving local boundary conditions, that can be employed in conjunction with the Finite Difference/Finite Element Methods (FD/FEM) to solve electromagnetic scattering and radiation problems involving periodic structures. The key step in this approach is to derive linear relationships that link the value of the field at a boundary grid point to those at the neighboring points. These linear relationships are identically satisfied not only by all of the propagating Floquet modes but by a few of the leading evanescent ones as well. They can thus be used in lieu of absorbing boundary conditions (ABCs) in place of the usual FD/FEM equations for the boundary points. Guidelines for selecting the orders of the evanescent Floquet modes to be absorbed are given in the paper. The present approach not only provides a simple way to derive an accurate boundary condition for mesh truncation, but also preserves the banded structure of the FD/FEM matrices. The accuracy of the proposed method is verified by using an internal check and by comparing the numerical results with the analytic solution for perfectly conducting strip gratings     

Study of photon-induced L3 vacancy alignment for elements La to U

Alignment of photon-induced L₃ vacancies is studied in rare earth and highZ elements at energies of experimental interest, near thresholds to 60 keV, under nonrelativistic dipole approximation. Numerical calculations of the matrix element are undertaken to produce theoretical data for comparison with the experimental findings. The A₂ values being s>0.1 at photoelectron energies <20 keV are certainly higher than 5–8% uncertainties quoted in experimental results. Present findings are from a very basic model, hydrogen-like and can further be treated as reference to observe the impact of screening, relativistic, multipole and retardation corrections to the model     

Working group report: Neutrino and astroparticle physics

This is the report of neutrino and astroparticle physics working group at WHEPP-7. Discussions and work on CP violation in long baseline neutrino experiments, ultra high energy neutrinos, supernova neutrinos and water Cerenkov detectors are discussed.     

Electromagnetic interference mitigation by using a spread-spectrumapproach

We investigate a new technique, referred to as spread-spectrum clock generation (SSCG), for reducing the level of radiated emission from devices with digital clock signals. To calculate the radiated emissions from such devices, we model the radiating geometry and compute the radiated field at a multitude of frequencies by using NEC-4, which is an electromagnetic field solver based on the method of moments (MoM). We consider a variety of modulating profiles for the spread spectrum clock and demonstrate that by using a frequency deviation of only 1%, we can achieve from 10 to 30 dB reduction in the radiated emission levels