Catalytic Nitrene Transfer by an FeIV-Imido Complex Generated by a Comproportionation Process

Nitrene transfer reactions have emerged as one of the most powerful and versatile ways to insert an amine function to various kinds of hydrocarbon substrates. However, the mechanisms of nitrene generation have not been studied in depth albeit their formation is taken for granted in most cases without definitive evidence of their occurrence. In the present work, we compare the generation of tosylimido iron species and NTs transfer from Fe^II and Fe^III precursors where the metal is embedded in a tetracarbene macrocycle. Catalytic nitrene transfer to reference substrates (thioanisole, styrene, ethylbenzene and cyclohexane) revealed that the same active species was at play, irrespective of the ferrous versus ferric nature of the precursor. Through combination of spectroscopic (UV-visible, Mössbauer), ESI-MS and DFT studies, an Fe^IV tosylimido species was identified as the catalytically active species and was characterized spectroscopically and computationally. Whereas its formation from the Fe^II precursor was expected by a two-electron oxidative addition, its formation from an Fe^III precursor was unprecedented. Thanks to a combination of spectroscopic (UV-visible, EPR, Hyscore and Mössbauer), ESI-MS and DFT studies, we found that, when starting from the Fe^III precursor, an Fe^III tosyliodinane adduct was formed and decomposed into an Fe^V tosylimido species which generated the catalytically active Fe^IV tosylimide through a comproportionation process with the Fe^III precursor.     

Increasing Reliability in Cable-Free Radio LANs Low Level Forwarding in HIPERLAN

Radio LANs are emerging in the computing world. They are supported by distinct configurations: on the one hand radio LANs with base stations and a wired backbone, on the other hand radio LANs implementing Intra-forwarding. Adding a new node in a radio LAN with Intra-forwarding, increases the reliability, while this reliability decreases with ad hoc or hub configurations. This advantage of Intra-forwarding is quantified. Intra-forwarding, as defined in the HIPERLAN standard, is based on a hop-by-hop policy and link check procedures. It is shown how point-to-point packets and broadcast packets are forwarded. The three basic components of Intra-forwarding needed to build and update the Intra-forwarding database are described. The originality of this approach is the use of multipoint relays which enable better scalability. The correctness of the Intra-forwarding protocol is proved and its cost is evaluated.     

UV curing of a novel resin derived from poly(ethylene terephthalate)

The synthesis and characterization of photopolymerizable unsaturated polyester resins based on PET waste are described. The resins came from a depolymerization process based on the glycolysis of PET by diethylene glycol (DEG). Different molecular weights of glycolysates were synthesized. Then, the latter was functionalized by a methyl hemiester of maleic acid to obtain unsatured α,ω‐bismaleate PET oligomers. In the presence of an electron donor monomer, such as triethylene glycol divinyl ether, these electron acceptor oligomers were copolymerized by way of charge‐transfer complexes under UV irradiation. The reaction was monitored in situ by real‐time IR spectroscopy to study the kinetics of photopolymerization. This one was studied in relation with the physical and chemical characteristics of oligoesters and the composition of mixtures containing divinyl ethers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1324–1335, 2007     

111In–L–LDL and 153Gd–L–LDL as radiotracers for detection of AR4‐2J rat pancreatic tumors

Pancreatic cancer has an extremely poor prognosis, due, in part, to lack of methods for early diagnosis. The present study was designed to evaluate the potential of labeling low‐density lipoprotein (LDL) with a radionuclide using a lipid chelating agent, bis(stearylamide) of diethylenetriaminepentaacetic acid (L), to detect pancreatic tumors by gamma‐scintigraphy. Previous studies indicated that the difficulty of visualization of pancreatic tumors was due to their poor vascularization. This study compares the ability of two radiotracers, ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL to target highly vascularized rat pancreatic tumors (AR4‐2J) implanted in nude mice. Biodistribution studies showed that the tumor uptake of ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL tracers was twofold and fivefold higher respectively than with the controls (¹¹¹In citrate and ¹⁵³Gd citrate respectively). These tracers would thus be suitable for scintigraphic imaging. We show here that LDL could be employed as a delivery system for tracers such as ¹¹¹In or ¹⁵³Gd when these two radionuclides are complexed by a lipid‐chelating anchor, and that ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL enabled better visualization of the pancreatic tumor tissues, with a better result with ¹⁵³Gd–L–LDL. Copyright © 2004 John Wiley & Sons, Ltd.     

Vibration frequencies of Ca3Fe2Si3O12 andradite: an ab initio study with the CRYSTAL code

The vibrational spectrum of Ca3Fe2Si3O12 andradite is calculated at the Gamma point by using the periodic ab initio CRYSTAL program that adopts an all-electron Gaussian-type basis set and the B3LYP Hamiltonian. The full set of frequencies (17 IR active, 25 Raman active, and 55 inactive modes) is calculated. The effect of the basis set on the calculated frequencies is discussed. The modes are characterized by direct inspection of the eigenvectors and isotopic substitution. The present calculations permit us to clarify some of the assignment problems raised by experiments. The mean absolute differences of the various modes with respect to the available experimental IR and Raman data are as small as 9 and 5 cm(-1), respectively.     

The katoite hydrogarnet Si-free Ca3Al2([OH]4)3: a periodic Hartree-Fock and B3-LYP study

The structure of the Si-free katoite hydrogarnet (116 atoms in the unit cell) has been investigated at the periodic ab initio quantum mechanical level with the CRYSTAL program, by using a Gaussian type basis set and both the HF and the hybrid B3-LYP Hamiltonians. The structure has been fully optimized at various pressures in the 0-46 GPa range; the modifications of the structure, and in particular of the (OH)4 group, as a function of pressure are analyzed. At the B3-LYP level and P greater than 15 GPa, a O-H...O interaction of increasing strength appears, with important modifications in the local geometry of the tetrahedral site. The calculated omega01(O-H) fundamental vibrational frequency at zero pressure is in excellent agreement with experiment (3674 and 3663 cm(-1), respectively); the omega01(O-H) stretching frequency remains essentially constant in the 0-15 GPa interval, whereas it dramatically decreases at higher pressures with a corresponding anharmonicity increase, as a consequence of the formation of a strong hydrogen bond. The hydration energy of grossular and the formation energy of Si-free katoite have also been computed, and the B3-LYP results are in quite good agreement with experiment.     

Sol-gel polyimide-silica composite membrane: gas transport properties

The effect of introduction of silica particles prepared by the sol-gel technique on the gas transport properties of a polyimide film was studied. The sorption and permeation of N₂, O₂, CO₂, H₂ and CH₄ were studied and correlated with morphological changes in the polymer structure. From sorption isotherms, we observed that the composite membrane presents higher solubility coefficients than the polyimide one. The solubility coefficient ratio between the composite and the polyimide is about 1.5–2.0. The isotherms were analyzed in terms of the dual mode sorption. The Henry's coefficient and the Langmuir's affinity and saturation constants were obtained allowing to calculate the Langmuir to Henry concentration ratios as function of the gas pressure. These ratios decrease until zero within a certain pressure range as long as the Langmuir's mode is acting and they are higher for the polyimide membrane when compared with the composite one. This study was completed with calorimetric measurements during the sorption. The gas interaction energy in kJ/mol decreases within the same pressure range as previously described. The measured energies are higher for the polyimide film when compared with the composite one because the polyimide membrane presents a stronger energetic effect caused by a higher Langmuir's contribution. From permeation studies at 3.15⁵ Pa, the composite membrane showed higher permeability coefficients and permselectivities than the polyimide one. All these results were explained, taking into account the difference on the imidization degree of both membranes and the morphological changes which may be induced by the silica nodules in the organic/inorganic interphases.     

Intermediates in the Dehydrogenation of Hydroaromatic Compounds with Quinones

Dehydrogenation of hydroaromatic compounds with quinones was reinvestigated in the light of recent criticism of the reaction mechanism. Kinetic and spectroscopic evidence shows that disappearance of substrate proceeds at the same rate as the product-forming step. A mechanism consisting in fast formation followed by slow decomposition of an intermediate can be ruled out. The order of reactivities of 1,4-cyclohexadiene ( 1 ), 1,4-dihydronaphthalene ( 8 ) and 9,10-dihydroanthracene ( 11 ) changes in going from benzoquinone to chloranil or 2,3-dichloro-5,6-dicyanobenzoquinone. It is suggested that this behaviour could be due to contribution of CT-complexes or HOMO-LUMO interactions for determining the reactivity of the substrates.     

Dissociations of positively charged aliphatic epoxides. I. Structure elucidation of the γ-cleavage products

Dissociative ionization of 1,2-epoxy n-alkanes gives rise to abundant [C₄H₇O]⁺ ions of structure [CH₃OCHCHCH₂]⁺. This conclusion is drawn from metastable ion analysis and from collisional activation spectra. This fragmentation involves the C? C ring opening and a 1,4-H migration leading to the corresponding enol ether [CH₃OCHCHCH₂R]^+. precursor of [CH₃OCHCHCH₂]⁺ fragment. The same isomerization scheme applies to 1,2-epoxy methyl substituted alkanes and 2,3-epoxy n-alkanes.     

Determination of ochratoxin A in domestic and imported beers in italy by immunoaffinity clean-up and liquid chromatography

A method first developed to quantify ochratoxin A in wine has been applied to the analysis of domestic and imported beers in Italy. The method uses commercial immunoaffinity columns for clean-up and high-performance liquid chromatography for quantification of the toxin. Beer was degassed, then diluted with a polyethylene glycol-sodium hydrogencarbonate solution and applied to an OchraTest immunoaffinity column. Ochratoxin A was eluted from the immunoaffinity column with methanol and quantified by reversed-phase HPLC with fluorometric detector. Average recoveries of ochratoxin A from blank beer spiked at levels from 0.04 to 1.0 ng/ml ranged from 93.8% to 100.4%, with relative standard deviations between 3.3% and 5.7%. The detection limit was 0.01 ng/ml based on a signal-to-noise ratio of 3:1. The analysis of 61 samples of domestic (10) and imported (51) beers showed ochratoxin A levels ranging from <0.01 to 0.135 ng/ml with an incidence of contamination of 50% and no substantial difference between strong and pale beers.