Error-resilient video communications over CDMA networks with a bandwidth constraint.

We present an adaptive video transmission scheme for use in a code-division multiple-access network, which incorporates efficient bandwidth allocation among source coding, channel coding, and spreading under a fixed total bandwidth constraint. We derive the statistics of the received signal, as well as a theoretical bound on the packet drop rate at the receiver. Based on these results, a bandwidth allocation algorithm is proposed at the packet level, which incorporates the effects of both the changing channel conditions and the dynamics of the source content. Detailed simulations are done to evaluate the performance of the system, and the sensitivity of the system to estimation error is presented.     

Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

Degeneracy in NLP and the development of results motivated by its presence

We study notions of nondegeneracy and several levels of increasing degeneracy from the perspective of the local behavior of a local solution of a nonlinear program when problem parameters are slightly perturbed. Ideal nondegeneracy at a local minimizer is taken to mean satisfaction of second order sufficient conditions, linear independence and strict complimentary slackness. Following a brief exploration of the relationship of these conditions with the classical definition of nondegeneracy in linear programming, we recall a number of optimality and regularity conditions used to attempt to resolve degeneracy and survey results of Fiacco, McCormick, Robinson, Kojima, Gauvin and Janin, Shapiro, Kyparisis and Liu. This overview may be viewed as a structured survey of sensitivity and stability results: the focus is on progressive levels of degeneracy. We note connections of nondegeneracy with the convergence of algorithms and observe the striking parallel between the effects of nondegeneracy and degeneracy on optimality conditions, stability analysis and algorithmic convergence behavior. Although our orientation here is primarily interpretive and noncritical, we conclude that more effort is needed to unify optimality, stability and convergence theory and more results are needed in all three areas for radically degenerate problems.Research supported by National Science Foundation Grant ECS 90-00560 and Grant N00014-89-J-1537 Office of Naval Research     

Sensitivity and stability analysis for nonlinear programming

We give a brief overview of important results in several areas of sensitivity and stability analysis for nonlinear programming, focusing initially on qualitative characterizations (e.g., continuity, differentiability and convexity) of the optimal value function. Subsequent results concern quantitative measures, in particular optimal value and solution point parameter derivative calculations, algorithmic approximations, and bounds. Our treatment is far from exhaustive and concentrates on results that hold for smooth well-structured problems.Research supported by National Science Foundation Grant ECS-86-19859 and Grant N00014-89-J-1537 Office of Naval Research.     

Perturbed variations of penalty function methods

Penalty function techniques are well known perturbation methods for solving mathematical programming problems. We define new classes of penalty functions by introducing simple perturbations of classical penalty functions or, equivalently, perturbations of the given problem. Motivation is a recently developed method called Projective SUMT, proposed by McCormick, based on solving the differential equation associated with a barrier function minimizing trajectory. We show that this trajectory-following algorithm is a simple variation of classical SUMT (Sequential Unconstrained Minimization Technique). This leads to numerous additional interpretations, simplified convergence results, duality relationships and extensions. Like SUMT, Projective SUMT is closely related to the approach of Karmarkar.Research supported by Grant ECS-86195859 and NSF N00014-85-K-0052, Office of Naval Research.     

Dilute sulfuric acid pretreatment of corn stover at high solids concentrations

Applied Biochemistry and Biotechnology - The enzymatic digestibility of a pretreated substrate is enhanced by increasing the severity of the pretreatment conditions, apparently because a greater...     

(1-Adamantanethio)pyridines and tetrahydropyridines from the reaction of 1-adamantanethiol with pyridine I-oxide in acetic anhydride

The reaction of pyridine 1-oxide with 1-adamantanethiol in acetic anhydride produced a mixture of 2- and 3-(1-adamantanethio)pyridines, 1-aeetyl-2-(1-adamantanethio)-3-hydroxy-4-acetoxy-1,2,3,4-telrahydropyridine and the corresponding 3-acetoxyderivative. Pure substances were separated by means of column chromatography on alumina. The tetrahydropyridines were identified by means of their proton magnetic and mass spectra. 4-(1-Adamantanethio)pyridine was synthesized from 4-chloropyridinc and 1-adamantanethiol. The three isomeric (1-adamantanethio)-pyridines were, each, cleaved by concentrated hydrochloric acid to give 1-chloroadamantane and the corresponding pyridinethiol.     

Method development for the quantitation of ABT-578 in rabbit artery tissue by 96-well liquid-liquid extraction and liquid chromatography/tandem mass spectrometric detection

Quantitative determination of drug concentrations in tissue samples can provide critical information for drug metabolism, kinetics, and toxicity evaluations. For analysis of tissue samples using liquid chromatography/tandem mass spectrometric (LC/MS/MS) detection, homogenization is a critical step in achieving good assay performance. Assay performance can be closely evaluated by spiking the drug directly into tissue samples prior to homogenization. It is especially important to include this assay evaluation for the analysis of artery tissue samples because artery tissue is very elastic, making it quite a challenge to develop an effective procedure for homogenization. An LC/MS/MS assay in 96-well format using liquid-liquid extraction was developed for analyzing ABT-578 in rabbit artery samples. Tissue quality control samples were prepared by spiking ABT-578 stock solutions directly into the tissue before homogenization. The usage of the tissue control samples gives a thorough evaluation of the sample preparation process that includes both homogenization and sample extraction. A 20% blood in saline solution was used as a homogenization solution. Calibration standards were made by spiking ABT-578 into rabbit whole blood. Blood quality control samples were also prepared by spiking ABT-578 into rabbit whole blood. These blood QC samples were used to confirm the validity of the calibration curve. A lower limit of quantitation of 0.050 ng/mL was achieved. The linear dynamic range of blood standards was from 0.050-30.3 ng/mL with the correlation coefficient (r) ranging from 0.9969-0.9996. Overall %CV was between 1.3 and 7.0%, and analytical recovery was between 98.2 and 105.8% for blood QC samples. The %CVs for tissue QC samples were between 6.7 and 13.0%, and analytical recovery after correction was between 93.5 and 114.3%.     

Chronocoulometric study of the electrochemistry of Prussian blue

During the electrochemical oxidation of Prussian blue (PB) to Prussian yellow (PY), an electrocatalytic oxygen production proceeds at the electrode when aqueous electrolyte solutions are used. The formed oxygen is scavenged by the PY, probably by absorption, and it is consumed during the electrochemical reduction of PY to PB by a heterogeneous chemical reaction of PB with oxygen to PY and hydrogen peroxide. Because of this catalytic regeneration of PY, it is impossible to determine the amount of low-spin iron by chronocoulometry using a potential program in which PB is first oxidized to PY and then the charge is measured to reduce PY to PB. The latter charge is biased by the electrocatalytic PY regeneration.